8378/E8

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down PVC(SWR) soil / RWP pipe including all fittings such as bend, shoe etc complete including necessary scaffolding complete all as directed by Engineer-in-Charge.

Demolition of Plain cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling 100mm bore Cast iron pipe, jointed in cement mortar in foul places including necessary scaffolding upto any height complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour Plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour Plain cement concrete 1:5:10 type E2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour Plain cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in surface channel complete all as specified and as directed.

Material and Labour RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cover slabs for manholes / gully traps / drain etc set in cement mortar (1:4) complete including necessary form work complete all as specified and directed including demolition of old unserviceable cover slab. Note: Necessary form work shall deemed to be included in quoted rates.

Material & labour Fly ash Brick work with bricks class designation 7.5, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

All as per Item No.13.00 here in before but except bricks complete all as specified and as directed. Note:- Old serviceable bricks obtained from demolition shall be reused.

Supply and fix Mild steel TMT bars, 6-8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Materials and labour 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base complete as specified and directed.

Materials and labour 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in flooring including finishing the surfaces even and smooth without using extra cement complete as specified and directed.

Materials and labour for non-skid, ceramic, coloured joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge including dismantling of old unserviceable tiles with screed bed .

Materials and labour for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge including dismantling of old unserviceable tiles with screed bed .

Materials and labour Glazed, ceramic, coloured tiles of size 300mm x 200mm x 7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing course cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed including dismantling old unserviceable wall tiling with backing coat.

Materials and Labour Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed including taking out old unserviceable chequerred tiles.

Materials and labour Rendering 15 mm thick on brick or concrete surfaces in CM 1:6 and surface finished even and smooth with using extra cement complete all as specified and directed by Engr-in-Charge.

Materials and labour Concrete bed for 150mm dia pipe in PCC 1:3:6 type C2 ( using 40mm graded crushed stone aggregates.including packing under and haunching against the sides of pipes after they are laid and tested complete all as directed by Engr-in-Charge including deolition of old unserviceable existing concrete bed to drain pipe.

Supply and fix 150mm dia (internal) Stoneware salt glazed drain pipe grade ‘A’ laid in trenches and jointed with cement mortar 1:1 etc. complete all as specified and as directed by Engineer-in-Charge including taking down old unserviceable SGSW pipe.

Supply & fix in repair health faucet with CP flexible cord fixed on wall complete all as specified and directed by Engr-in-Charge. Make:ESSCO Cat Part No.ALE-ESS-585 or equivalent model from as specified in Particular Specifications

Supply and fix 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls or floors and disturbed portion of the wall making good with cement concrete in (1:2:4) including distance pieces, plugs, holder bats up to any height of building with scaffolding etc cmplete all as specified and as directed by Engineer-in-Charge.

Refixing Old serviceable 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls or floors and disturbed portion of the wall making good with cement concrete in (1:2:4) including distance pieces, plugs, holder bats up to any height of building with scaffolding etc cmplete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100mm bore of pipe CI bends (any radius) with duck foot or heel rest bendsupto any height of building with necessary scaffolding complete all as specified and directed.

Supply and fix 100mm bore of pipe CI tee, branch piece ( any radius) diminising pieces or tapers in foul places with oval access door upto any height of building with necessary scaffolding complete all as specified and directed.

Supply and fix in repairs Cast iron nahani / floor trap with grating for 100mm dia of outlet pipe including making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed.

Taking down existing broken inspection eye cover from soil/waste/rain water pipe from any height any position and supply and fix new CI eye cover with rubber washer and nut bolt for 100/75 mm dia pipe including ncessary scaffolding and saftey measures complete all as directed.

Supply and fix 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc upto any height of building with necessary scaffolding complete all as specified and directed .

Refixing of old serviceable 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall with necessary new fittings etc complete all as specified and directed .

Supply and fix 110 mm bore, PVC (SWR) bends of any radius complete all as specified upto any height of building including scaffolding and as directed.

Material and labour Applying first coat of cement slurry in sunken floor @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitous composit compound @0.253 Kg/Sqm, this layer will be allowed to air cure for 4 hours & second layer of cement slurry @0.242 Kg/Sqm mixed with acrylic based polymer modified cemntitious compound @ 0.126 Kg/Sqm this layer will be allowed to air cure for 4 hours followed with water curing for 48 hrs & applying 200 micron thick polythene film paste with help of adhesive and same shall be provided over treatment & all as specified and directed.

Cleaning of blocked kitchen trap / nahani trap / floor trap/ Water closet of any type / pattern with vaccum pump upto 1st manhole and making the drain channel fully functional by flushing with sufficient quantity of water to entire satisfaction of Engineer-in-Charge and removing the waste materials / sludge etc to a distance outside residential area and burying the same in a pit and spreading bleeching powder surrounding the area @ 1Kg/ Sqm and sealing the top with fine sand of suitable depth complete all as specified and as directed. Note:-(i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand and spreadind of bleeching powder shall deemed to be included in the rate quoted. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Desilting of blockage/blocked Manhole of any size and depth including disposal of rubbish/sludge and making good all as directed by Engineer- in-Charge. Note : (i) Disposal of sludge obtained shall be disposed in pit made by contractor and shall be covered withfine sand and bleaching powder of suitable quantity.. (ii) Rate for disposal of sludge are inclusive in quoted rates. (iii) Cost of pit for disposal of waste materialsshall be deemed to be included in the item rate quoted.

Cleaning of existing cover/un-covered drains of any section and depth and removal of sludge, rubbish and other foreign material and flushing with adequate quantity of water and deposiedt the sludge to a distance not exc. 50m complete all as directed by Engr-in- Charge. Note : (i) Disposal of sludge obtained shall be disposed in pit made by contractor and shall be covered withfine sand and bleaching powder of suitable quantity.. (ii) Rate for disposal of sludge are inclusive in quoted rates. (iii) Cost of pit for disposal of waste materialsshall be deemed to be included in the item rate quoted.

Cleaning of rain water/waste pipe of any dia by rodding or by bamboo splits including removing and refixing of eye cover in existing position etc. complete all as directed by Engineer-in-Charge. Note : (i) Disposal of sludge obtained shall be disposed in pit made by contractor and shall be covered withfine sand and bleaching powder of suitable quantity.. (ii) Rate for disposal of sludge are inclusive in quoted rates. (iii) Cost of pit for disposal of waste materialsshall be deemed to be included in the item rate quoted.

Cleaning of all debris/vegetation over roof surfaces of accesible or unaccesible roof portion upto any height and the mouth of rain water pipe and around the tanks area and removal of materials out side the MOD land ncluding necessary scaffolding and safety measures complete all as directed by Engineer-in-Charge.

Cleaning of existing 100mm dia / 150mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc coming in the next manhole is removed complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Cleaning of existing 200mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc coming in the next manhole is removed complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Supply and fix in replacement Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge.

Supply and fix in repairs Vitreous china wash down water closet ( padestal pattern) white, with 'S' or 'P' trap ( excluding flushing cistern and flush pipe) including new PVC seat cover and making good disturbed surfaces with concrete as per existing one complete all as specified and directed by the Engr-in-Charge.

Supply and fix tubes 15mm bore medium grade galvanized with all fittings and fixed complete to wall and ceiling or laid in floors including taking out old unserviceable GI pipe 15mm bore with fittings complete all as specified and directed by Engr-in-Charge.

All as per item No.45.00 here-in-before but 20mm bore.

Supply and fix RCPC manhole cover of size 450mm dia and load upto 3 MT including demolition of old RCC manhole cover complete all as specified and as directed.

Supply and fix RCPC manhole cover of size 380mm dia and load upto 3 MT including demolition of old RCC manhole cover complete all as specified and as directed.

Supply and fix Mils steel stack clamps made out of 50mm x 5 mm flat iron and 16mm dia round stay including bolts and nuts and securing ends of stay to wall or roof, bore of pipe 75mm to 150mm complete including taking out old unserviceable stack clamp complete all as specified and as directed. Note:- Unit rate quoted by the tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc hoisting , lowering and preventing measures etc upto four stories height of building .

Materials and Labour Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm bore of pipe complete all as specified and as directed.

Taking out inspection door from soil/ waste pipe bend/ tee/ 'Y' junction and removing blockage materials from it for cleaning of blockage and finally refixing the inspection door complete all as specified and as directed. Note:- Unit rate quoted by the tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc hoisting , lowering and preventing measures etc upto four stories height of building .

AUTO ELECTRICALS

JOY-EN-JOY

M/S L.R.ENTERPRISES

SPECIAL CONCRETE AND CONSTRUCTION CO.

R T BUILDERS