REPAIR TO GALVALUME SHEET JOINERY CEILING AND FLOOR AND WALL TILING PERIODICAL MAINTANENCE AND RENOVATION OF TOILETS IN OTM AND JCO ORS MD ACCN IN ANAND PARBAT IN THE AOR OF AGE B/R-II UNDER GE NORTH DELHI CANTT 10

Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar patterhn roof covering all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of sky blue/ sea green colour having tensile strength of 550 MPa as in roof covering, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridges, velly gutters fixed with self tapping screws complete all as specified and directed.

Dismantling framed work timber scantling 40 sq cm and over in section and in any position complete all as specified.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed

S&F rolled mild steel Fe-410W (Gde-E-250) quality 'B'Roof trusses (framed), trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and directed.

S&F mild steel bolts. Purpose made. With hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square complete all as specified.

S&F MS plates (plain or chequered) channels, square cut or notched ordinary and counter sunk) forming holes, without any attachment.

Demolition of brick work built in cement mortar including all quoins, arches, pillers etc all as specified and directed..

M&L for brick work in CM 1:6 with using subclass 'B' bricks, old size straight or curbed on plan exc 6 m mean radius complete all as specified and directed by Engr-in-Charge..

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed

Providing and fixing Gypsum Board 600mmx600mmx12mm thick in ceiling fixed or laid Aluminium frame work with screws complete all as per manufacturers instructions and as directed.

S&F GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleatscomplete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the serviceable tiles to store and rubbish off the premises etc complete all as specified and directed..

M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M&L glazed ceramic coloured tiles size 450x300x7mm/350x250x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismantling complete all as specified and directed.

Taking down cement plaster on brick/stone walls etc any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 any faces of brick/concrete surfaces finished even and fair without using extra cement complete all as specified and as directed..

M&L for Cement plaster in CM 1:4, 15mm thick on the fair faces of brick wall and finishing the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of white chalk whiting, complete all as specified and directed.

M&L preparing newly plastered surfaces and applying two coats of cement base paint over a coat of primer on wall complete all as specified and as directed .

M&L Preparing plastered or unplastered old decorated surfaces of walls complete removal of exiting treatment and applying two coats of oil bound distemper all as specified .

M&L Preparing plastered or unplastered old decorated surfaces of walls complete removal of exiting treatment and applying two coats of cement based paint all as specified .

Material and labour preparation of old/previously treated wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint all as directed and specified.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) not exceeding 1.5 sqm and remove from site as directed and specified.

All as per the description of srl item 26above here-in-before but exceeding 1.5. sqm but n.exc 4 sqm each and -ditto- complete

Cutting holes in brick walls built in cement mortar exceeding half brick but n.exc one brick for inserting hold fasts or similar work and madegood the dismantles portion in cement concrete 1:2:4 type B-1 as directed and specified.

S&F for 35mm thick plain, framed, panelled door shutters (any numberer of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats.

S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc, the size of members as specified in SSR , Part I section 8, clause No 8.24 (a) and as directed

S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc. Note:- The unit rate quoted by contractor includes cost of glass, wire mesh and all other connected accessories , complete all as specified and directed.

S&F for aluminium anodised powder coated Deco grill (DG-104), 10mm wide with U shape snap beading complete all as specified and directed.

S&F aluminum anodised powder coated frame for doors, windows, vantilator with one or more rebates including joining cleat for fixing etc. Complete all as specified.

S&F aluminum anodised powder coated window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws etc. Complete all as specified.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as specified.

S&F Factory made solid panel PVC door shutter 30mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mmcomplete all as specified and directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane as directed and specified

S&F Galvanised mild steel wire cloth of 0.56mm nominal dia of wire, average width of apparature 1.18mm & fixed with tinned tacks or galvanised wire staples as diected and specified.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixedas diected and specified.

S&F Mild steel medium weigh butt hinges 100mm size and fixed as directed and specified.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed as diected and specified..

S&F Aluminium handles, cast type, anodised size of handle 150mm as diected and specified.

Demolition of reinforced cement concrete of any description all as directed by Engineer-in- Charge.

M&L mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking,bending, spirally, hooking and binding with and incl MS wire 0.9mm dia complete all as specified and directed.

All as per the description of srl item No 44 above here-in-before but 6mm to 8mm dia and complete all as directed and specified.

Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified..

Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified..

S&F galvanised steel water tubes medium grade 15mm dia with fittings, fixed to walls ceilings and laid in floor etc complete all as directed and specified.

S&F galvanised steel water tubes medium grade 20mm dia with fittings, fixed to walls ceilings and laid in floor etc complete all as directed and specified.

Cutting chases, pinning in. makinggood to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supply & Fix rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including dismantling existing water tanks all directed and specified.

S&F 20mm bore PTMT high pressure rate float valve with aluminium rod and ball complete as directed and specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flushing cistern & flush pipe) Complete all as specified and diected.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, and pedestal etc complete all as directed and spcified.

Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified.

S&F in repair bib taps cast copper alloy fancy type C.P 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified.

S&F in repair concealed stop valve cast copper alloy fancy type C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F in repair for 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as diected and specified.

S&F in repair for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as diected and specified.

S&F PVC connections 15mm bore with PTMT nuts with washers of length 600mm as diected and specified..

S&F grating square 150mm size of PTMT all as directed and specified

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor as diected and specified..

S&F in repairs drappery rods fancy type size, and pattern as approved 20mm dia with gold colour knobs at both ends including sliding system and arrangment for sheer curtain complete all as directed (Make -

S&F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F 15mm dia bore shower rose of PTMT any colour with arm 195mm long, with with bend of 45 degree with flange of PTMT of required colour, in cl screw with iron pipe as diected and specified.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) as diected and specified.

M&L Waste fitting brass CP for WHB and urinal basins etc with long screwed shanks and fly nut flange complete and fixed.

Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick all as directed and specified.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed