Repair modification and up gradation of Civil, MEP etc. works of 02 Amrapali projects i.e. Silicon city-1 and Leisure Valley Villas

Grand Total Cost (A + B+C) ₹ 24,08,97,437

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and

watering of the earth in layers not exceeding 20 cm in trenches, plinth,

sides of foundation etc. complete

Supplying chemical emulsion in sealed containers including delivery as

5.1 2.34.1 Chlorpyriphos emulsifiable concentrate of 20% Litre 234.75 0.00 - 9.00 2,112.75 9.00 2,112.75

Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-

termite treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emul sion @ one litre

per hole, 300 mm apart including drilling 12 mm diameter holes and

plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor:

6.1.1 2.35.3.1 With Chlorpyriphos E.C. 20% with 1% concentration Sqm 310.05 0.00 73.00 22,633.65 73.00 22,633.65

Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4

graded stone aggregate 20 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8

graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls, walls

(any thickness) including attached pilasters, columns, piers, abutments,

8 4.2 pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, -

bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to

floor five level, excluding the cost of centering, shuttering and finishing:

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4

graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with cement concrete

9 4.10 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 Sqm 410.85 0.00 - 19.00 7,806.15 19.00 7,806.15

graded stone aggregate 12.5mm nominal size derived from natural sources)

Providing & applying a coat of residual petroleum bitumen of grade of VG-

10 of approved quality using 1.7kg per square metre on damp proof course

after cleaning the surface with brushes and finally with apiece of cloth

lightly soaked in kerosene oil.

Providing and laying in position ready mixed or site batched design mix

cement concrete for plain cement concrete work; using coarse ggregate and

fine aggregate derived from natural sources, Portland Pozzolana/Ordinary

Portland /Portland Slag cement, admixtures in recommended proportions

as per IS:9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of

concrete to site of laying, curing, carriage for all leads; but excluding the

cost of centering, shuttering and finishing as per direction of the engineer-in-

charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in design

mix is more than 110% of the minimum specified cement content, the

contractor shall have discretion to either re-design the mix or bear the cost

of extra cement.

11.1 4.20.1 All works upto plinth level : - - -

11.1.1 4.20.1.4 Concrete of M25 grade with minimum cement content of 300 kg /cum cum 9439.05 10.00 94,390.50 60.00 5,66,343.00 70.00 6,60,733.50

Reinforced cement concrete work in walls (any thickness), including

attached pilasters, buttresses, plinth and string courses, fillets, columns,

12 5.2 pillars, piers, abutments, posts and struts etc. above plinth level up to floor - - -

five level, excluding cost of centering, shuttering, finishing and

reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources :

12.1 5.2.2 3 graded stone aggregate 20 mm nominal size derived from natural Cum 10852.95 18 1,95,353.10 2 21,705.90 20.00 2,17,059.00

Centering and shuttering including strutting, propping etc. and removal of

Foundations, footings, bases of columns, etc. for mass

13.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm. 927.25 306 2,83,738.50 85 78,816.25 391.00 3,62,554.75

13.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm. 736.40 804 5,92,065.60 102 75,112.80 906.00 6,67,178.40

13.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm. 961.30 454 4,36,430.20 50 48,065.00 504.00 4,84,495.20

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

14.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 107.85 46626.00 50,28,614.10 20072.00 21,64,765.20 66698.00 71,93,379.30

Add for plaster drip course/ groove in plastered surface or moulding to

R.C.C. projections.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and laying in position ready mixed or site batched design mix

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength;

including pumping of concrete to site of laying, curing, carriage for all leads;

16 5.33 but excluding the cost of centering, shuttering, finishing and reinforcement - - -

as per direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in design

mix is more than 1.10 times of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix or bear the cost

of extra cement.

16.1 5.33.1 All works upto plinth level - - -

16.1.1 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 9504.75 7 66,533.25 3 28,514.25 10.00 95,047.50

16.1.1. 5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 9655.70 124 11,97,306.80 0 - 124.00 11,97,306.80

16.1.2 5.33.2 All works above plinth level upto floor V level - - -

16.1.2. 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 9860.40 77 7,59,250.80 12 1,18,324.80 89.00 8,77,575.60

16.1.2. 5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 10011.35 8.00 80,090.80 0.00 - 8.00 80,090.80

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors

or part thereof.

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

Brick work with common burnt clay F.P.S. (non modular) bricks of class

19 6.4 designation 7.5 in superstructure above plinth level up to floor V level in all - - -

shapes and sizes in :

Extra for brick work / AAC block masonry / Tile brick masonry in

20 6.5 superstructure above floor V level, for each four floors or part thereof by Cum 169.45 3.00 508.35 3.00 508.35 6.00 1,016.70

mechanical means.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to floor V level.

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length (hold fast lugs or dash fastener

shall be paid for separately).

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length (hold fast lugs or dash fastener

shall be paid for separately).

Providing and fixing glazed shutters for doors, windows and clerestory

windows using 4 mm thick float glass panes, (weight not less than 10 kg per

sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of

required size with necessary screws.

24.1 9.9.1 Second class teak wood - - -

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) decorative type, core of block board construction with frame of 1st

class hard wood and well matched teak 3 ply veneering with vertical grains

or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Extra for providing lipping with 2nd class teak wood battens 25 mm

26 9.23 minimum depth on all edges of flush door shutters (over all area of door sqm 462.35 0 - 21 9,709.35 21.00 9,709.35

shutter to be measured).

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame

with 10 mm diameter bolts, nuts and wooden plugs and embedding in

cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse

sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock

29 9.76 with 6 levers and a pair of lever handles of approved quality with necessary each 854.65 0 - 12 10,255.80 12.00 10,255.80

screws etc. complete.

30 9.81 Providing and fixing bright finished brass handles with screws etc. complete: - - -

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary screws

Structural steel work riveted, bolted or welded in built up sections, trusses

32 10.2 and framed work, including cutting, hoisting, fixing in position and applying kg 133.70 33894 45,31,627.80 - 33894.00 45,31,627.80

a priming coat of approved steel primer all complete.

Marble stone flooring with 18 mm thick marble stone, as per sample of

marble approved by Engineer-in-charge, over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey

cement slurry, including rubbing and polishing complete with :

34 11.24 Extra for pre finished nosing to treads of steps of marble stone. metre 719.90 1215.00 8,74,678.50 - 1215.00 8,74,678.50

Extra for marble stone flooring in treads of steps and risers using single

length up to 2.00 metre. sq

Kota stone slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade of

the slab, including rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of

cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with

cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment

to match the shade of stone.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

38 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the - - -

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

38.1 11.41.A.3 Glazed Vitrified tiles Matt/Antiskid finish of size - - -

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete

as per the architectural drawings with 18 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-

39.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 4481.30 63.00 2,82,321.90 - 63.00 2,82,321.90

Polished Granite stone slab of all colour and texture except Black,

Cherry/Ruby Red

Providing and laying brick tiles over mumty roofs, grouted with cement

mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water

proofing compound by weight of cement, over 12 mm layer of cement

mortar 1:3 (1 cement : 3 fine sand) and finished neat:

With common burnt clay F.P.S. (non modular) brick tiles of class

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse

42 12.21 sand : 4 stone aggregate 10 mm and down gauge), including finishing with - - -

cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20

43 12.22 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 Each 298.25 176 52,492.00 - 176.00 52,492.00

mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the outlet complete.

44 13.1 12 mm cement plaster of mix : - - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster

45 13.11 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement sqm 518.55 - 139 72,078.45 139.00 72,078.45

plaster 1:6 (1 cement : 6 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground

level for every additional height of 3 m or part thereof.

Distempering with 1st quality acrylic distemper (ready mixed) having

VOC content less than 50 gms/litre, of approved manufacturer, of

required shade and colour complete, as per manufacturer's

48 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : - - -

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including

Finishing with Epoxy paint (two or more coats) at all locations prepared and

49 13.52 applied as per manufacturer's specifications including appropriate priming - - -

coat, preparation of surface, etc. complete.

Providing and applying white cement based putty of average thickness 1

50 13.80 mm, of approved brand and manufacturer, over the plastered wall surface Sqm 156.05 29175 45,52,758.75 697 1,08,766.85 29872.00 46,61,525.60

to prepare the surface even and smooth complete.

Removing white or colour wash by scrapping and sand papering and

51 13.88 preparing the surface smooth including necessary repairs to scratches etc. Sqm 19.75 30899 6,10,255.25 408 8,058.00 31307.00 6,18,313.25

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

53 13.111 Finishing walls with Acrylic Smooth exterior paint of required shade : - - -

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement

Providing and laying in situ seven course water proofing treatment with APP

(Atactic Polypropylene) modified Polymeric memberane over roof

consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th &

6th courses of bonding material @ 1.20 kg/sqm, which shall consist of

blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th

layers of roofing membrane APP modified Polymeric membrane 2.0 mm

thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with

centre core as 100 micron HMHDPE film sandwiched on both sides with

polymeric mix and the polymeric mix is protected on both side with 20

micron HMHDPE film. 7th, the top most layer shall be finished with brick

tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3

fine sand) mixed with 2% integral water proofing compound by weight of

cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand)

and finished neat (item of laying brick tiles shall be paid for separately).

Extra for covering top of membrane with Geotextile, 120 gsm non woven,

100% polyester of thickness 1 to 1.25 mm bonded to the membrane with

intermittent touch by heating the membrane by Butane Torch as per

manufactures recommendation.

Demolishing cement concrete manually/ by mechanical means including

56 15.2 disposal of material within 50 metres lead as per direction of Engineer - in - -

57.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 2434.25 2505.00 60,97,796.25 236.00 5,74,483.00 2741.00 66,72,279.25

57.2 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 1503.60 0.00 - 410.00 6,16,476.00 410.00 6,16,476.00

Demolishing brick work manually/ by mechanical means including stacking

of serviceable material and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-charge.

Dismantling dressed stone work ashlar face stone work, marble work or

precast concrete work manually/ by mechanical means including stacking of

serviceable and disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-charge :

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface

61 15.56 for plaster including disposal of rubbish to the dumping ground within 50 Sqm 54.65 18321 10,01,242.65 408 22,297.20 18729.00 10,23,539.85

Demolishing R.C.C. work by mechanical means and stockpiling at designated

locations and disposal of dismantled materials up to a lead of 1 kilometre,

stacking serviceable and unserviceable material separately including cutting

reinforcement bars.

Disposal of building rubbish / malba / similar unserviceable, dismantled or

waste materials by mechanical means, including loading, transporting,

63 15.60 unloading to approved municipal dumping ground or as approved by Cum 263.95 3730 9,84,533.50 249 65,723.55 3979.00 10,50,257.05

Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts

64 16.43.1 Cement concrete prepared with batch mixing machine cum 10529.35 0.00 - 472 49,69,853.20 472.00 49,69,853.20

Providing and fixing pre-moulded joint filler in expansion joints of RCC roads

/ CC pavements after making the joints dust free with high pressure air jet per cm

cleaners, all complete as per direction of the Engineer-in-Charge. (Pre- depth per

65 16.45 moulded joint fillers shall be made of bitumen hot sealing compound cm width 5.30 4712.00 24,973.60 4792.92 25,402.48 9504.92 50,376.08

impregnated fibre board having impregnation more than 35%, conforming per metre

to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound length

Providing, laying and making kerb channel 30 cm wide and 50 mm thick

with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone

aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm

nominal size, well rammed and consolidated and grouted with fine sand,

including finishing the top smooth etc. complete and as per direction of

Engineer-in-charge.

Providing and laying 75 mm thick compacted bed of dry brick aggregate of

40 mm thick nominal size including spreading, well ramming, consolidating

and grouting with jamuna sand, including finishing smooth etc. complete as

per direction of Engineer in- charge.

Providing and laying at or near ground level factory made kerb stone of M-

25 grade cement concrete in position to the required line, level and

curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),

including making joints with or without grooves (thickness of joints except

at sharp curve shall not to more than 5mm), including making drainage

opening wherever required complete etc. as per direction of Engineer-in-

charge (length of finished kerb edging shall be measured for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge)

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete

from batching plant. The ready mixed concrete shall be laid and finished

with screed board vibrator , vacuum dewatering process and finally finished

by floating, brooming with wire brush etc. complete as per specifications

69 16.75 and directions of Engineer-in harge. (The panel shuttering work shall be Cum 9823.80 740 72,69,612.00 - 740.00 72,69,612.00

paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/ recoverable

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Taking out existing kerb stones of all types from footpath/ central verge,

including removal of mortar etc., disposal of unserviceable material to the

70 16.82 dumping ground, for which payment shall be made separately and stacking metre 39.35 608.00 23,924.80 0.00 - 608.00 23,924.80

of serviceable material within 50 metre lead as per direction of Engineer-in-

Taking out existing CC interlocking paver blocks from footpath/ central

verge, including removal of rubbish etc., disposal of unserviceable material

71 16.83 to the dumping ground, for which payment shall be made separately and Sqm 131.75 300 39,525.00 0 - 300.00 39,525.00

stacking of serviceable material within 50 metre lead as per direction of

Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/shape

laid in required line, level, curvature, colour and pattern over and including

72 16.84 50 mm thick compacted bed of coarse sand, filling the joints with fine sand Sqm 402.95 300.00 1,20,885.00 0.00 - 300.00 1,20,885.00

etc. all complete as per the direction of Engineer in-charge. (Old CC paver

blocks shall be supplied by the department free of cost).

Laying at or near ground level old kerb stones of all types in position to the

required line, level and curvature, jointed with cement mortar 1:3 (1

cement : 3 coarse sand), including making joints with or without grooves

(thickness of joints, except at sharp curve, shall not be more than 5 mm),

including making drainage opening wherever required etc. complete as per

direction of Engineer-in-charge. (Length of finished kerb edging shall be

measured for payment). (Old kerb stones shall be supplied by the

department free of cost)

Providing and laying integral cement based treatment for water proofing on

the vertical surface by fixing specified stone slab 22 mm to 25 mm thick

with cement slurry mixed with water proofing compound conforming to

IS:2645 in recommended proportions with a gap of 20 mm (minimum)

between stone slabs and the receiving surfaces and filling the gaps with

neat cement slurry mixed with water proofing compound and finishing the

exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20

mm thick with neat cement punning mixed with water proofing compound

in recommended proportion complete at all levels and as directed by

Engineer-in-charge :

Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the

basement, water tanks, roof slabs, podiums, reservior, sewage & water

treatment plant, tunnels / subway and bridge deck etc., prepared by mixing

in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water)

for horizontal surfaces and applying the same from negative (internal) side

75 22.23 with the help of synthetic fiber brush. The material shall meet the - - -

requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability

of concrete by more than 90% compared with control concrete as per DIN

1048 and resistant to 16 bar hydrostatic pressure on negative side. The

crystalline slurry shall be capable of self-healing of cracks up to a width of

0.50mm. The work shall be carried out all complete as per specification and

the direction of the engineer-in-charge. The product performance shall

carry guarantee for 10 years against any leakage.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

75.2 22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 362.80 5930 21,51,404.00 - 5930.00 21,51,404.00

Providing, mixing and applying bonding coat of approved adhesive on

76 26.31 chipped portion of RCC as per specifications and direction of Engineer-In- - - -

charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @

76.1 26.31.1 2.2 kg cement per sqm of surface area mixed with specified proportion of Sqm 141.20 29781 42,05,077.20 - 29781.00 42,05,077.20

approved polymer

Providing, mixing and applying SBR polymer (of approved make) modified

Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with

polymer minimum 2% by wt. of cement used) as per specifications and

directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement of thickness shall

be done just after the surface preparation is completed and Payment under

this item shall be made only after proper wet curing has been done and

surface has been satisfactorily evaluated by sounding / tapping with a blunt

metal instrument and/or the 75mm size cube crushing strength at the end

of 28 days to be not less than 30 N/Sqmm2).

Providing and injecting approved grout in proportion recommended by the

manufacturer into cracks/honey-comb area of concrete/ masonry by

78 26.35 suitable gun/pump at required pressure including cutting of nipples after - - -

curing etc. complete as per directions of Engineer-in Charge. (The payment

shall be made on the basis of actual weight of approved grout injected.)

Stirrer mixed SBR Polymer (of approved make) modified Cement slurry

made with Shrinkage Compensating Cement in concrete/RCC work.

Providing and inserting 12mm dia galvanised steel injection nipple in honey

comb area and along crack line including drilling of holes of required

diametre (20mm to 30mm) up to depth from 30mm to 80mm at required

79 26.39 spacing and making the hole & crack dust free by blowing compressed air, Each 236.90 1000 2,36,900.00 6163 14,60,014.70 7163.00 16,96,914.70

sealing the distance between injection nipple with adhesive chemical of

approved make and allow it to cure complete as per direction of Engineer-In

Providing & Applying weather proof sealant on outer joints of approved

make confirming to IS & directed by Engineer-in-charge.

82 7216 Self-Drilling/Self-Tapping Screws M-6 25mm long Each 4.00 66186.00 2,64,744.00 - 66186.00 2,64,744.00

85 1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 130.00 76 9,880.00 - 76.00 9,880.00

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

NON -SCHEDULE ITEMS

Supply and Installation of FSB-235 ABS / RUBBER SPEED BUMPS Made from

a unique co polymer blend of high impact and tear resistant polymer made

in revolutionary Hexacore design with High visibility, reflective tapes in Red

& Yellow to warn during night. Having dimensions Length = 250 mm, Width

= 350 mm & Height 50 mm. All complete as specified and as directed by

the Engineer-in-Charge :

Providing and fixing of chicken mesh with cement mortar and screws/nail in

87 NS 2 plaster work between concrete bend, lintels, column and brick work for Sqm 174.00 2979.00 5,18,346.00 - 2979.00 5,18,346.00

avoid the cracks in finishing work.

stone slab flooring over 20 mm (average) thick base laid over and jointed

with grey cement slurry mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base of cement mortar 1 : 4

(1 cement : 4 coarse sand) :

Crack Repair: Makeing 'V' groove of 10 mm wide and 10 mm deep over

89 NS 4 crack line by electrically operated angle grinder with diamond concrete saw mtrs 107.00 3000 3,21,000.00 4110 4,39,770.00 7110.00 7,60,770.00

blade and cleaning it by air blower as directed by Engineer-in-charge..

Crack filling: Supply and apply solvent free, moisture insensitive epoxy resin

based patch repair putty on horizontal surfaces.

Product requirements: suitable for submerged condition; compressive

strength of 40 N/mm2 (1 day) according to IS 9162-1979.

Providing and laying of Stone aggregate 40 mm nominal size and above and

91 NS6 spreading the same in 75mm thick over the RCC slab in landscape area or as cum 2870.00 161.00 4,62,070.00 - 161.00 4,62,070.00

directed by Endineer-in-Charge

Providing and fixing 9 Layer Acrylic Synthetic system – comprising of 1 layer

of Primer, 3 Layers of Sealer coats, 3 layers of Rubberised Cushion coats, 1

layer of exclusive Anti-skid treatment and 1 layer of UV Top Coat – in

customized preferred shades as per drawing – complete with standard line

markings. Lastly, application of Gloss Coat in the end which gives extra

sheen to the surface and makes it fairly dust resistant. The product,

classified by ITF and certified by NABL approved lab, is an all-weather

product for outdoor use.• vender should provide Warranty of 2 years

against colour fading and bubbles. All complete as specified and as directed

by the Engineer-in-Charge :

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Rebar For Main Reinforcement: Supply and fixing of main reinforcement

using rebars of designated dia for column/beam/Shear walls/Foundations

at designed embedement length wherever required , including power

drilling, cleaning of holes, then rebars should be inserted in holes that

should be filled with FIS EM Plus of Fischer or equivalent, a heavy duty pure

epoxy based rebarring chemical with ETA approval, DIBt, approved for

diameter range from 8 mm to 40 mm reinforcement bar as per

manufacturer's specification as per the direction of Engg In-charge. Drilling

93 NS8 of hole should be done upto provided embedment depth as per the design - - -

from manufacturer approved by EnC, followed by cleaning with blow

pump, wire brush and blow pump for 4 times, complete as per the

manufacturer's methodology. The chemical shall be approved for diamond-

drilled and water-filled drill holes as well as seismic applications in

performance categories C1, C2 for rebar connections. Product shall have

test certificate for 120years of service life & shall have ETA complying to

EAD 332402-00-0601-v01. Cost of providing, cutting, bending of rebar shall

be paid separately as per approved item.

For Shear Connector/Ties/Stirrups: Supply and fixing of shear

connectors/ties/stirrups using rebars of designated dia for

column/beam/Shear walls etc at designed embedment length

wherever required , including power drilling, cleaning of holes, then

rebars should be inserted in holes that should be filled with FIS V

Plus of Fischer or equivalent, a hybrid rebarring chemical with ETA

approval, DIBt, approved for diameter range from 8 mm to 28mm

reinforcement bar as per manufacturer's specification as per the

direction of Engg In-charge. Drilling of hole should be done upto

provided embedment depth as per the design from manufacturer

approved by EnC, followed by cleaning with blow pump, wire brush

and blow pump for 4 times, complete as per the manufacturer's

methodology. The chemical shall have tested service life of 50years

as per ETA. Cost of providing, cutting, bending of rebar shall be paid

separately as per approved item.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

DETAILED ESTIMATE FOR PLUMBING & FIRE FIGHTING

DESCRIPTION OF ITEMS UNIT DSR 2022 gst on 12% Silicon leisure valley

DSR- Cumulative

S.NO. factor Cumulative Amount

2023/MR Quantity

PLUMBING Quantity Amount Quantity Amount

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

Earthwork in excavation by mechanical means ( Hydraulic

excavator) / manual means in foundation trenches or

drains (not exceeding 1.5m in width or 10 sqm on plan)

1.00 2.8 including dressing of sides and ramming of bottoms, lift up - -

to 1.5m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, with in a

Excavating trenches of required width for pipes, cables,

etc including excavation for sockets, anddressing of sides,

ramming of bottoms, depth up to 1.5 m, including getting

out the excavated soil, and then returning the soil as

required, in layers not exceeding 20 cm in depth, including

consolidatingeach deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as

directed,within a lead of 50 m :

2.10.1 All kinds of soil - -

Pipes, cables etc. exceeding 80 mm dia but not exceeding

Extra for every additional lift of 1.5 m or part thereof in

excavation / banking excavated or stacked materials

2.26.1 All kinds of soil - -

Qty for 1.5-3.0 M depth RWH & Desilt Chamber Cum 126.8 41.29 5,236.15 0.00 0.00 41.29 5,236.15

Providing and laying in position cement concrete of

4.00 4.1 specified grade excluding the cost of centering and - -

shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size)

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work

up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded

stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc.

and removal of form for

Suspended floors, roofs, landings, balconies and access

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

7.00 5.9.16 Edges of slabs and breaks in floors and walls - -

Steel reinforcement for R.C.C. work including

8.00 5.22 straightening, cutting, bending, placing in position and - -

binding all complete upto plinth level.

Brick work with common burnt clay modular bricks of class

designation 7.5 in foundation and plinth in:

Providing and fixing stone slab with table rubbed, edges

rounded and polished, of size 75x50 cm deep and 1.8 cm

thick, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the

stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer

in-charge and finished smooth.

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm nominal

with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand)

and a coat of neat cement, rounding the edges and making

and finishing the outlet complete.

Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10

mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC

moulded fittings/ accessories for unplasticised Rigid PVC

13.00 12.42 rain water pipes conforming to IS : 13592 Type A including - -

jointing with seal ring conforming to IS : 5382 leaving 10

mm gap for thermal expansion.

12.42.2 Single Push fit coupler - -

12.42.3 Single Tee with door - -

12.42.6 Shoe (Plain) - -

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and fixing unplasticised -PVC pipe clips of

approved design to unplasticised - PVC rain water pipes

by means of 50x50x50 mm hard wood plugs, screwed with

14.00 12.43 M.S. screws of required length, including cutting brick work - -

and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)

and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe

15.00 12.44 cast iron grating 15 cm diameter and weighing not less Each 54.70 0.00 - 0.00 0.00 - -

than 440 grams.

12 mm cement plaster finished with a floating coat of neat

cement of mix :

Providing and fixing white vitreous china pedestal type

water closet (European type W.C. pan) with seat and lid,

10 litre low level white P.V.C. flushing cistern, including

18.00 17.2 flush pipe, with manually controlled device (handle lever),

conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 6515.00 6.00 39,090.00 6.00 39090.00 12.00 78,180.00

Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require :

White Vitreous China Flat back wash basin size 550x400

mm with single 15 mm C.P. brass pillar tap

Providing and fixing 8mm dia C.P./S.S. Jet with flexible

tube upto 1meter long with S.S. Triangular plate to

european type W.C. Of approved quality and make as

approved by engineer in charge.

Providing and fixing CP Brass 32mm size bottle trap of

21.00 17.22A approved quality & make and as per the direction of Each 1034.80 6.00 6,208.80 6.00 6208.80 12.00 12,417.60

engineer in charge.

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

Providing and fixing M.S. holder bat clamps of approved

design to sand cast iron/cast iron (spun) pipe embedded in

and including cement concrete blocks 10 x 10 x 10 cm of

1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size ) including cost of cutting

holes and making good the walls etc.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and fixing PTMT towel ring trapezoidal shape

215 mm long, 200 mm wide with minimum distances of 37

24.00 17.72 mm from wall face with concealed fittings arrangement of Each 231.95 4.00 927.80 4.00 927.80 8.00 1,855.60

approved quality and colour, weighing not less than 88

Providing and fixing white vitreous china battery based

infrared sensor operated urinal of approx. size 610 x 390

x 370 mm having pre & post flushing with water (250 ml &

25.00 17.80 500 ml consumption), having water inlet from back side, Each 7979.20 6.00 47,875.20 6.00 47875.20 12.00 95,750.40

including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings,

26.0 18.7 including fixing the pipe with clamps at 1.00 m spacing. - -

This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Internal work - Exposed on wall - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings,

27.0 18.9 including fixing the pipe with clamps at 1.00 m spacing. - -

This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Supplying, fixing, testing and commissioning of butterfly

DSR E&M- valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

2022- 18.11 marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

100 mm nominal bore

Providing and fixing gun metal gate valve with C.I wheei of

approval quality.

80 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with

45 cm length , 15 mm nominal bore

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and fixing C.P. brass bib cock of approved

quality conforming to IS:8931 :

Providing and fixing C.P. brass angle valve for basin mixer

and geyser points of approved quality conforming to

IS:8931 15mm nominal bore

Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal

33.00 19.2 size) all-round S.W. pipes including bed concrete as per - -

standard design :

Providing and fixing square-mouth S.W. gully trap class SP-

1 complete with C.I. grating brick masonry chamber with

water tight C.I. cover with frame of 300x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type. With common burnt clay F.P.S.

(non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of

cement mortar in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc. complete :

Constructing Brick Masonry circular type manhole 0.91 m

internal dia at bottom and 0.56m dia at top with FPS bricks

class designation 75 in cement mortar 1:4 (1 cement : 4

Coarse sand), inside cement plaster 12mm thick with

cement mortar 1:3 ( 1 cement : 3 coarse sand) finished

with a floating coat of of neat cement, foundation concrete

1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone

aggregate 40mm nominal size) and making necessary

channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse

Sand : 4 Graded Stone Aggregate 20mm nominal size)

finished with a floating coat of neat cement complete as

per standard design.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

0.91m deep with SFRC cover and frame (heavy duty HD-

20 grade designation) 560mm internal diameter

conforming to I.S:12592, total weight of cover and frame to

be not less than 182Kg. fixed in cement concrete 1:2:4 mix

(1cement: 2 coarse sand: 4 graded stone aggregate 20mm

nominal size) including centering, shuttering all

complete.(Excavation foot rests and 12mm thick cement

plaster at the external surface shall be paid for separately)

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

Extra depth for circuler type manholes 0.91 m internal dia (

at bottom ) beyond 0.91m to 1.67 m .

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

Constructing Brick Masonry circular type manhole 1.22 m

internal dia at bottom and 0.56m dia at top with FPS bricks

class designation 75 in cement mortar 1:4 (1 cement : 4

Coarse sand), inside cement plaster 12mm thick with

cement mortar 1:3 ( 1 cement : 3 coarse sand) finished

with a floating coat of of neat cement, foundation concrete

1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone

aggregate 40mm nominal size) and making necessary

channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse

Sand : 4 Graded Stone Aggregate 20mm nominal size)

finished with a floating coat of neat cement complete as

per standard design.

1.68m deep with SFRC cover and frame (heavy duty HD-

20 grade designation) 560mm internal diameter

conforming to I.S:12592, total weight of cover and frame to

be not less than 182Kg. fixed in cement concrete 1:2:4 mix

(1cement: 2 coarse sand: 4 graded stone aggregate 20mm

nominal size) including centering, shuttering all

complete.(Excavation foot rests and 12mm thick cement

plaster at the external surface shall be paid for separately)

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

Constructing Brick Masonry circular type manhole 1.52 m

internal dia at bottom and 0.56m dia at top with FPS bricks

class designation 75 in cement mortar 1:4 (1 cement : 4

Coarse sand), inside cement plaster 12mm thick with

cement mortar 1:3 ( 1 cement : 3 coarse sand) finished

with a floating coat of of neat cement, foundation concrete

1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone

aggregate 40mm nominal size) and making necessary

channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse

Sand : 4 Graded Stone Aggregate 20mm nominal size)

finished with a floating coat of neat cement complete as

per standard design.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

2.30m deep with SFRC cover and frame (heavy duty HD-

20 grade designation) 560mm internal diameter

conforming to I.S:12592, total weight of cover and frame to

be not less than 182Kg. fixed in cement concrete 1:2:4 mix

(1cement: 2 coarse sand: 4 graded stone aggregate 20mm

nominal size) including centering, shuttering all

complete.(Excavation foot rests and 12mm thick cement

plaster at the external surface shall be paid for separately)

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

Providing orange colour safety foot rest of minimum 6 mm

thick plastic encapsulated as per IS : 10910, on 12 mm dia

steel bar conforming to IS: 1786, having minimum cross

section as 23 mmx25 mm and over all minimum length 263

mm and width as 165 mm with minimum 112 mm space

between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate

40.00 19.16 anchoring projections on tail length on 138 mm as per Each 553.70 1600 8,85,920.00 100.00 55370.00 1,700.00 9,41,290.00

standard drawing and suitable to with stand the bend test

and chemical resistance test as per specifications and

having manufacture's permanent identification mark to be

visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal

size) complete as per design

Making connection of drain or sewer line with existing

manhole including breaking into and making good the

walls, floors with cement concrete 1:2:4 mix (1 cement : 2

41.00 19.21 coarse sand : 4 graded stone aggregate 20 mm nominal - -

size) cement plastered on both sides with cement mortar

1:3 (1 cement : 3 coarse sand), finished with a floating coat

of neat cement and making necessary channels for the

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Boring/drilling bore well of required dia for casing/ strainer

pipe, by suitable method prescribed in IS: 2800 (part I),

including collecting samples from different strata,

preparing and submitting strata chart/ bore log, including

hire & running charges of all equipments, tools, plants &

machineries required for the job, all complete as per

direction of Engineer-in-charge, upto 90 metre depth below

23.1.1 All types of soil - -

Supplying, assembling, lowering and fixing in vertical

position in bore well, unplasticized PVC medium well

casing (CM) pipe of required dia, conforming to IS: 12818,

including required hire and labour charges, fittings &

accessories etc. all complete, for all depths, as per

direction of Engineer -in-charge.

Supplying, assembling, lowering and fixing in vertical

position in bore well unplasticized PVC medium well

screen (RMS) pipes with ribs, conforming to IS: 12818,

including hire & labour charges, fittings & accessories etc.

all complete, for all depths, as per direction of Engineer-in-

Supplying, filling, spreading & leveling stone boulders of

size range 5 cm to 20 cm, in recharge pit, in the required

thickness, for all leads & lifts, all complete as per direction

of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size

range 5 mm to 10 mm, in the recharge pit, over the existing

layer of boulders, in required thickness, for all leads & lifts,

all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size

range 1.5 mm to 2 mm in recharge pit, in required

thickness over gravel layer, for all leads & lifts, all

complete as per direction of Engineer -in-charge.

Gravel packing in tubewell construction in accordance with

IS: 4097, including providing gravel fine/ medium/ coarse,

in required grading & sizes as per actual requirement, all

complete as per direction of Engineer-in-charge

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

NON -SCHEDULE ITEMS

49.00 MR-1 Providing and fixing Coat Hook. Each 738.00 6.00 4,428.00 6.00 4428.00 12.00 8,856.00

Providing ,Fixing of straight / offset type flexible single

body push fit type WC pan connector of with integral

single mould sealing fins made of flexible EVA body to be

fixed with manufacture supplied grease, including rubber

bush / adaptor for use with C.I pipe as supplied with the

Providing and fixing 125 mm dia, 3 mm thick Stainless

steel grating with frame for floor traps or drains of required

pattern including cutting and making good the floors

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings,

52.0 MR-4 including fixing the pipe with clamps at 1.00 m spacing. - -

This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Internal work - Exposed on wall - -

Providing and fixing forged brass operated ball valve of full

53.00 MR-5 flow of superior quality having minimum working pressure - -

Providing, fixing, testing and commissioning moterise Ball

valve of following sizes, for filling of overhead tanks

complete with high & low level switchs & pressure switch

to control the valve. The level controller shalll be installed

54.00 MR-6 in over head tank. The level switch will close the valve - -

when water level is high & open the valve when level is

low in the tank. The system should be complete in all

respect with accessories, 220V AC / 24 V DC, IP 67 water

level control unit, Control Panel, copper control wiring in

Supply installation testing and commissioning of Pressure

reducing valve complete.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing and fixing on wall face unplasticised - PVC

moulded fittings/ accessories for unplasticised Rigid PVC

56.00 MR-8 rain water pipes conforming to IS : 13592 Type A, - -

including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

Providing and fixing uPVC Floor Clean Out plug 100mm

with suitable insert keys for opening, joint with PVC socket

to soil pipe / waste pipe of uPVC pipe as required

complete as per instruction of the Engineer in charge.

Providing & Fixing of Pro S Heavy Duty Spray Pop up

having adjustable Rottary Nozzle ( For Small & Medium

Lawn ) from 40-360 capable of covering 2-5.4m at 2.07-

3.2Bars with a discharge rate of 0.09-0.28lps.The overall

58.00 MR-10 pop-up height shall be 4 inch. The Spray Head body, stem, Each 2200.00 125 2,75,000.00 0.00 0.00 125.00 2,75,000.00

nozzle and screen shall be constructed of heavy-duty,

ultraviolet resistant plastic. It shall have a heavy-duty

stainless steel retract spring for easy alignment of the

Water Supply Pump (Hydropneumatic System With

variable Speed System)

Providing, fixing and testing of packaged variable skid

mounted hydropneumatic system comprising of :-

Vertical, inline multistage centrifugal pumping set with

stainless steel SS-304 stage casing and SS-304 impellers

with stainless steel SS-316L shaft as per IEC standards

a) and GJL250 cast iron suction & discharge casing, - -

connected to TEFC ventilated IE5 class induction motor

50reH 2900 rpm, suitable for 400/440 Volts, 3 phase,

P ssuAreC vessel of non corrosive FRP composite

construction lined with NSF and/or FDA listed material,

like high density polyethylene with fully replaceable

b) polyurethane. Air cell burst pressure of minimum of 5 - -

times the vessel operating pressure and cycle tested for

2 50 000 cycles

No. and capacity of Pressure Vessel – 01 Nos. x 100 Ltrs - -

Control Panel with programmable logic controller (PLC) for

cyclic operation of pumps. Pump working sequence

should change after every operation.Contractor overload

relays and MCBs should confirm to IEC 898 – 1995/

c) specifications. Blinking indications for pumps start, trip, low - -

level trip, health supply should be provided in the panel

along with the ammeter & voltmeter. Control panel should

also consist of cooling fan. Each pump shall have

seperate VFD panel.

Pressure switches bellow type fitted with micro switch

and having maximum pressure and differential scale

should confirming BS-6134 standards and IP55 protection

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Stainless steel suction and delevery header, ball valve on

e) each pump on section delivery side, non return valves, Y - -

stainer complete in all respect.

Ball valves to be used should be Hot Pressed brass OT-

58 with stainless steel ball and P.T.F.E seal and O-

Ring. NRVs to be used should be with Springs and O-

Ring arrangement.

Complete set system to be mounted on a common base

frame and shall follow following duty.

III For Domestic Water Supply (Terrace) - -

(1 working + 1 stand by) - -

Capacity - 150 lpm (Each) - -

Incoming: - -

1 no. of 100Amp FP MCCB of 16 KA breaking capacity &

Trip setting as required.

Metering for incoming: - -

Digital Multifunction meter (MFM-4) with RS-485

communication port for measurement of PF, V, A & Hz , - -

equivalent to EM6459, with CT as required.

Phase indicating lamps RYB with 6 Amps SP MCB back

Bus Bars: - -

Electrolytic high conductivity Aluminium three phase and

neutral busbars rated at 100 Amps, insulated with heat

shrinkable coloured PVC sleeves & clip on shrouds for

joints. Current density of Bus Bar to be 1.3 sq.mm / amp.

Outgoing (All MCB/MCCB shall be suitable for motor

ii) 10Nos. 63A FP MCB of 10 KA breaking capacity . - -

Pump room panel as described above shall be complete

60.00 MR-12 with all interconnections, risers, internal wiring, labels, Each 25865.00 1 25,865.00 0.00 0.00 1.00 25,865.00

terminal blocks etc. complete as required.

Drainage Sump Pumps - -

61.00 MR-13 Submersible pumps for basement drainage . - -

Submersible single stage single entry cutter pumps with

C.I.body and C.I. two vane enclosed type impeller

connected to TEFC submersible motor for 415 volts, 3

phase, 50 cycles including MCC panel with level

controllers, auto control, sequential change over facility

with one proper working at low level & two proper working

at high level with an audible alarm including all

interconnectivity cables, with both pumps connected to

common outlet header including valves, non return valves,

lifting chains etc. complete in all respect including panels.

No. of Pumps: 2 (1 Working +1 Standby)=1 set - -

(Solid handiling capacity 12mm) - -

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Capacity- 300 lpm (Each) - -

(Solid handiling capacity 12mm) - -

Capacity- 200 lpm (Each) - -

Providing and fixing over straight or curved drain MS

grating with fixed frame of angle 50mm x 50mm x 5mm

size fixed to concrete with 25mm x 3 mm hold fasts

approx.100 mm long welded at interval of 600 mm and

welded cross braced at 1200 mm interval by 50 mm x 6

mm thick MS flats. The removable grating shall be made of

with outer frame of size 1000 mm long with MS flat 40mm

x 6mm having welded cross members on one direction

with MS flats of size 25 mm x 6 mm at a spacing of 30 mm

c/c. Including two of synthetic enamel paints over a coat of

Providing and fixing M.S. puddle flanges ( Class

C)fabricated of 750 mm long pipe pieces to RCC water

tanks wall / slab. The entire fitting shall be hot dipped

galvanised (Flanges shall confirm to BS10 Table E) .

25 mm dia (Screwed ends MS plate 6 mm thick; 100 mm x

40 mm dia (Screwed ends MS plate 6 mm thick; 160 mm x

50 mm dia (Screwed ends MS plate 6 mm thick; 200 mm x

80 mm dia (Flanged ends MS plate 6 mm thick; 150 mm x

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

100 mm dia (Flanged ends MS plate 6 mm thick; 200 mm x

Providing and fixing 800 mm X 800 mm M.S(heavy duty)

water tank cover with frame (as per EN-124) with lockable

arrangement complete in all regards (Total WT of cover

and frame tobe not less than 85 kg).

Providing and fixing water tank foot rests; poly propylene

steel reinforcement,the polypropylene shall confirm to

ASTM D-410 and shall be injection molded around 12mm

dia Fe-415 Steel reinforcing bar. The foot rest shall be

provided in RCC walls / brick walls as per requirement of

design / project manager

Supply, installation, testing and commissioning of sight

tube (of 3.5 to 4 m length) with isolation valve at top /

bottom, demarcation on tube for making the installation of

level indication on the RCC water tank complete.

Providing and fixing Electronic type level indicator for

water tanks mounting in panel with the following features,

level display, alarm when water level is low or high, full

range from one level to four level display and manual reset

for alarm etc. with electrical wiring conduit supports from

wall & ceiling probs and all other accessories complete as

Providing, fixing and testing of factory fitted packaged type

skid mounted pumping system comprising of :-

Horizontal inline centrifugal pumping set with CI casing

and SS-304 impellers with stainless steel SS-316L shaft as

per IEC standards and GJL250 cast iron suction &

discharge casing, connected to TEFC ventilated induction

motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3

phase, 50 Hz A.C. supply.

Motor Control Panel with DOL starter MCB and controller

for cyclic operation of pumps. Pump working sequence

should change after every operation.Contractor overload

relays and MCBs should confirm to IEC 898 – 1995/

specifications. Blinking indications for pumps start, trip, low

b) level trip, health supply should be provided in the panel - -

along with the ammeter & voltmeter. Control panel should

also consist of cooling fan and liquid level controller with

controll wiring from UG tank to UG tank with float switch for

contrlloing cut-off and cut-in of pumps and dry run

protection complete in all respects.

Suction and delivery header with Ball valves Hot Pressed

brass OT-58 with stainless steel ball and P.T.F.E seal

and O-Ring. NRVs to be used should be with Springs

and O-Ring arrangement.

Complete set system to be mounted on a common base

frame and shall follow following duty.

20.1 Domestic Water Transfer Pump - -

No. of Pumps: 2 (1 Working + 1 Stand by ) - -

Capacity : app.250.0 lpm - -

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Providing, fixing,testing and commissioning of water

softening plant. Cap. 700 LPM.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

DESCRIPTION OF ITEMS UNIT DSR 2022 gst on 12% Silicon leisure valley

DSR- Cumulative

S.NO. factor Cumulative Amount

2023/MR Quantity

FIRE FIGHTING WORK Quantity Amount Quantity Amount

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

DSR (E & including Welding, fittings like elbows, tees, flanges,

70.00 M) 2022 tapers, nuts bolts, gaskets etc. and fixing the pipe on the - -

18.7 wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of

required shade complete as required :

Supplying and fixing of fire brigade connection of cast iron

body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required :

4 way - 150 mm dia M.S. Pipe. (FOR UG TANK &

EXTERNAL RING MAIN)

DSR (E & Providing, fixing, testing & commissioning of 15mm dia

72.00 M) 2022 quartzoid bulb type sprinklers of rating 68 degree - -

18.21 centigrade with required accessories :

NON -SCHEDULE ITEMS

Providing & fixing angle iron (40mm x 40mm x 5mm ) door

frame and MS sheet (2mm thick) cum glass shutter of size

2.1 mtr x 1.2 mtr (N.S) with 25mm x 25mm x 3 mm angle

frame all around & stiffened in between i/c hinges, handle,

73.00 MR-1 locking arrangement, painting with approved synthetic Each 10030 90 9,02,700.00 0.00 0.00 90.00 9,02,700.00

enamel paint i/c sign writing on glass at internal hydrant

including providing & Fixing MS sheet 2mm thick on

remaining portion above door to close opening i/c painting

etc as required. (Internal)

TOTAL OF DSR & NDSR ITEMS 27,18,854.68 0.00 27,18,854.68

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

ELECTRICAL ESTIMATES. -Silcone City Amarpali Projects

DETAILED ESTIMATE FOR ELECTRICAL SERVICES

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

SILICON LEISURE VELLEY Commulative Commulative

S.NO. DSR-2022/MR DESCRIPTION OF ITEMS UNIT DSR 2022 gst on 12% including gst Quantity Amount Quantity Amount

1.0 1.1 SUBHEAD:- COMMON AREA LIGHTING

Supply and Wiring for Switch controlled Primary light points with 1.5 sq. mm

PVC insulated FRLS multistranded copper conductor 1100 Volt grade wires in 25

mm dia PVC surface conduit including cost of providing circuit wiring with 1.5 sq

mm PVC insulated FRLS multistranded copper conductor 1100 volt grade wires

and including cost of providing saddles hangers supports from soffit of slab etc for

surface conduiting and/or cost of cutting and filling chases for recessed conduiting

and the cost of providing and fixing a 6 amp 240 Volt grid plate mounted switch

with modular cover plate in a recessed GI box and including the cost of running 1.5

sq mm PVC insulated FRLS multistranded copper wire for earthing etc. complete

as per specifications and as required.

Supply and Wiring for Secondary light points (Looping points) as per Item 1.0

with 1.5 sq. mm PVC insulated FRLS multistranded copper conductor 1100 Volt

grade wires in 25 mm dia PVC surface/concealed conduit including cost of

providing saddles hangers supports from soffit of slab etc for surface conduiting

3.0 1.55.3 and/or cost of cutting and filling chases for recessed conduiting and including the Pt. 858 1.0633 912.3114 294 268219.5516 0 0 294 268219.5516

cost of running 1.5 sq mm PVC insulated FRLS multistrande copper wire for loop

earthing etc. complete as per specifications and as required.

SUBHEAD:- Cable Trays

Supplying and installing following size of perforated Hot Dipped Galvanised Iron

cable tray (galvanisation thickness not less than 50 microns) with perforation not

4.0 4.6 more than 17.5%, in convenient sections, joined with connectors, suspended from

the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.1. 4.6.1 100 mm width x 50 mm depth x 1.6 mm thickness Meter 669 1.0633 711.3477 0 0 0 0 0 0

4.2 4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness Meter 716 1.0633 761.3228 0 0 0 0 0 0

5.0 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including Set 7472 1.0633 7944.9776 4 31779.9104 0 0 4 31779.9104

6.0 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including Set 13838 1.0633 14713.9454 4 58855.7816 0 0 4 58855.7816

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Laying of one number additional PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground including excavation, sand

8.1 7.1 cushioning, protective covering and refilling the trench etc as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground in the same trench in one

tier horizontal formation including excavation, sand cushioning, protective covering

and refilling the trench etc as required.

Laying of one number pvc insulated and PVC sheathed /XLPE power cable of

9 7.5 1.1KV grade of following size in the existing RCC/Hume/METAL pipe as required:

Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper

conductor armoured cables suitable for working voltage upto and including 1100

Volts complete as required and as per specifications.

Supply and making end termination with brass double compression gland including

providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured

10.0 9.1 power aluminium conductor cable 1.1 KV grade of following sizes:-

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

11.0 MR1 SUBHEAD:-DG Set

Supply , installation testing & commissioning of 'Silent Type' New Diesel

Generating Set along with having prime power rating 1000KVA, 415 Volts at

1500RPM, 0.8 lagging Factor at 415 V suitable for 50 Hz, 3 phase system and

for 0.85 load factor and consisting of the following:-

Note:- Contractor check old DG set on site.

Diesel Engine 4 stroke radiator cooled, electric start, of suitable BHP at 1500 RPM

suitable for above output of alternator at 400C, 50% RH & at 1000 metre MSL and

confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for

one hour after 12 hours of continuous operation. The engine will be fitted complete

with all the required accessories.

Engine Mounted Instrument Panel fitted with and having digital display for

Start- stop switch with key.

Water Temperature indication

Lubrication Oil pressure indication

Battery charging indication

Over Speed trip Indication

Low lubrication oil trip indication

Engine Hours Indication

Synchronous alternator rated at 1000 KVA, 415 Volts at 1500 RPM, 3 phase 50

Hz, AC Supply with 0.8 lagging power factor at 400C, 50% RH & at 1000 metre

MSL. The alternator shall be having SPDB enclosure, brushless, continuous duty,

self-excited and self-regulated through AVR confirming to IS:4722/ BS 2613

suitable for tropical conditions and with class- F insulation. Alternator shall have

provision of end termination of Aluminium cable as per existing cable on site.

Base Frame & Foundation

Both the engine and alternator shall be mounted on suitable base frame made of

MS channel with necessary reinforcement which shall be installed on suitable

cement concrete foundation and vibration isolation arrangement as per

recommendations of manufacturer.

Daily service fuel tank of 1000 litres capacity, fabricated out of 3mm thick M.S.

sheet complete with all standard accessories and fuel piping between fuel tank and

diesel engine with MS class 'C pipes of suitable dia. Complete with valves level

indication & accessories as required as per specifications.

Exhaust System :

Dry exhaust mainfold with hospital grade exhaust silencer.

Starting System:

24V DC starting system comprising of starter motors: voltage regulator and

arrangement for initial excitation complete with 2 Nos. of batteries (25 plates, 160

AH lead Acid type) as required as per specifications.

Accoustic and weather proof enclosure with arrangement for fresh air intake for

cooling of the engine & alternator, extraction, discharging hot air into the

atmosphere as per specifications. The Acoustic Enclosure shall be factory fitted

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

The DG Set shall be provision of automation compatibility.

Diesel Generating Set 1000 KVA including Acoustic Enclosure. described as Set 7623206 1 7623206 0 0 1 7623206

Supply , installation testing & commissioning of 'Silent Type' New Diesel

Generating Set along with having prime power rating 320KVA, 415 Volts at

12 MR2 1500RPM, 0.8 lagging Factor at 415 V suitable for 50 Hz, 3 phase system and for

0.85 load factor and consisting of the following:-

Note:- Contractor check old DG set on site.

Diesel Engine 4 stroke radiator cooled, electric start, of suitable BHP at 1500 RPM

suitable for above output of alternator at 400C, 50% RH & at 1000 metre MSL and

confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for

one hour after 12 hours of continuous operation. The engine will be fitted complete

with all the required accessories.

Engine Mounted Instrument Panel fitted with and having digital display for

Start- stop switch with key.

Water Temperature indication

Lubrication Oil pressure indication

Battery charging indication

Over Speed trip Indication

Low lubrication oil trip indication

Engine Hours Indication

Synchronous alternator rated at 500 KVA, 415 Volts at 1500 RPM, 3 phase 50 Hz,

AC Supply with 0.8 lagging power factor at 400C, 50% RH & at 1000 metre MSL.

The alternator shall be having SPDB enclosure, brushless, continuous duty, self-

excited and self-regulated through AVR confirming to IS:4722/ BS 2613 suitable

for tropical conditions and with class- F insulation. Alternator shall have provision

of end termination of Aluminium cable as per existing cable on site.

Base Frame & Foundation

Both the engine and alternator shall be mounted on suitable base frame made of

MS channel with necessary reinforcement which shall be installed on suitable

cement concrete foundation and vibration isolation arrangement as per

recommendations of manufacturer.

Daily service fuel tank of 520 litres capacity, fabricated out of 3mm thick M.S.

sheet complete with all standard accessories and fuel piping between fuel tank and

diesel engine with MS class 'C pipes of suitable dia. Complete with valves level

indication & accessories as required as per specifications.

Exhaust System :

Dry exhaust mainfold with hospital grade exhaust silencer.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Starting System:

24V DC starting system comprising of starter motors: voltage regulator and

arrangement for initial excitation complete with 2 Nos. of batteries (25 plates, 160

AH lead Acid type) as required as per specifications.

Accoustic and weather proof enclosure with arrangement for fresh air intake for

cooling of the engine & alternator, extraction, discharging hot air into the

atmosphere as per specifications. The Acoustic Enclosure shall be factory fitted

The DG Set shall be provision of automation compatibility.

Diesel Generating Set 320 KVA including Acoustic Enclosure. described as above.

Supply, instalation, testing & commissioning of IP 55 for outdoor type of Meter

board panel, enclosure shall be as per IS:13947-1993.-Set

Note:- Meter Board size as per UPPCL Meter.

Supply,Receiving and fixing in position, effecting proper connections, testing and

15.0 MR4 commissioning of Round light 20W LED Luminaire for Stair case and Electrical Nos 1873 350 655550 0 0 350 655550

room as per site condition ,complete in all repects .

Supplying and installing of Tray tie for existing cable tray i.e suspender from the

16.0 MR5 ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. kg 346 50 17300 0 0 50 17300

Replacement of old door to new fire rated door

17.0 MR6 Supplying and fixing of electrical shaft fire rated door as per existing shaft sizes. No. 10768 360 3876480 0 0 360 3876480

SUBHEAD:-Rising Mains (In Airinsulated Construction)

Design, manufacture, supply, assembling, installation, testing and commissioning

of following suitable rating TPN Rising Mains of Aluminium bus bars with flange

end connection, deg, bend shall be made of minimum 1.6 mm thick dual housing

(Electro galvanised sheet + Aluminium) with epoxy polyster powder coating of

ANSI 49 GRAY on outsideas and integral earthing conductor through out the

length of the Rising mains

18.0 MR7 200 Amps Rising Mains described as above ( 45 kA ) RM 19380 84 1627920 0 0 84 1627920

19.0 MR8 800 Amps Rising Mains described as above ( 45 kA ) RM 38068 4 152272 0 0 4 152272

800A End Feed Unit with TPN feeder having 800A 4P MDO ACB 50KA including

ON/OFF/ TRIP indication & 3 phase indication with suitable size control MCB.

Suitable links for rising mains terminations, floor mounted, free standing as per

20.0 MR9 Standards complete in all respect. Taping of rising mains should be suitable for Set. 593854 1 593854 0 0 1 593854

1250A rising mains in two direction up/ down from a middle floor level.

SUBHEAD:-XLPE AL AR LT CABLE

Supply testing of under noted sizes of Aluminium conductor XLPE insulated PVC

sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power

distribution cables conforming to relevant IS code and as per specification in

ground (including trenches) through pipe or on wall / racks cable trays including

dressing and clamping the cable with MS zinc passivated clamps etc. as required.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Supplying, laying, connecting,terminating, testing & commissioning of under noted

sizes of PVC insulated, PVC sheathed unarmoured and overall PVC sleeved 1.1

KV grade control cables in pipe, wall, racks, cable trays, including, dressing,

clamping with M.S Zinc passivated clamps etc as required conforming to relevant

IS code and technical specifications.

Feeder Pillar (For External Landscape lighting)

IP 55 for outdoor Protection

63 Amps 4 pole MCB as incomer

100 Amps TPN Aluminium bus bars with heat shrinkable insulation sleeve. - 1 Set

63 Amps TP contactor 0-24 hours timer,and photo cell sensor auto / manual and

outgoings including 24 No. 10/16/20 Amps SP MCB with 3 Nos. 40 Amps DP

RCCB’s of 30 mA leakage current with separate neutral link of each phase- 1 set

63 Amps TP contactor 0-24 hours timer,and photo cell sensor auto / manual and

outgoings including 24 No. 10/16/20 Amps SP MCB with 3 Nos. 40 Amps DP

RCCB’s of 30 mA leakage current with separate neutral link of each phase- 1 set

Feeder Pillar for external / landscape lighting as described above No. 194545 3 583635 0 0 3 583635

Design, fabrication, assembling, wiring and supply, installation, testing and

commissioning of LT Panel, Distribution Panels, fabricated out of (load bearing

member of 2mm and non load bearing member 1.6 mm thick) CRCA sheet steel in

cubicle compartmentised modular 3b construction, free standing floor mounted

with bottom cable entry, dust and vermin proof with reinforcement of suitable size

angle iron, channel, `T’ sections and / or flats wherever necessary. 3 mm thick

cable gland plates shall be provided on top as well as at the bottom of the panels.

Panels shall be treated with all anticorrosive process before powder coating as per

specifications and final approved shade. 2 Nos. earthing terminals shall be

provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4

wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large

panels. Approval shall be taken for each panel in the form of shop drawings before

fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication

LT PANEL -(INDOOR TYPE)

Incomer - I (from Transformer - 1) comprising of:

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

4000 amps 4 Pole Electrically operated fully draw out type air circuit breaker Ics 50

kA with microprocessor release unit. The release shall have following protection:

• Short Circuit (S),

• Ground Fault (G),

Maximum demand, Fault History records, Event records facilities, LED display, %

loading with adjustable setting as per specification - 1 Set

Multifunction meter for THD, V,A, KWHr, Hz, P, kVAR with CT's and RS 485

communication port - 1 Set

Breaker ON / OFF / TRIP, Ready to close contact & indicating lights with control

Phase sequence relay - 1 Set

RYB Phase indicating light protected by 2 amps MCB’s. - 1 Set

Auto-manual / test selector / switch - 1 Set

24 V DC Shunt trip coil. - 1 Set

Under Voltage and over voltage relay (27 & 59) with timer - 1 Set

Class – B surge arrestor (Lines to Neutral) & (Neutral to Earth) suitable for 3

phases with protection fuse.

LT PANEL -(INDOOR TYPE) described as above Set. 750612 1 750612 0 0 1 750612

30.0 MR19 FEEDER PILLAR-OUTDOOR TYPE (VILLA)

Incomer comprising of :

250 amps 4 Pole MCCB with Thermalmagnetic release for SC and OL

protections - 1 Set

ON / OFF / TRIP indicating lights with control MCB -1 Set

Phase indicating light protected by 2 amps MCB’s - 1 Set.

Bus Bar comprising of :

300 Amps FP ,10KA FOR 1 SEC Aluminium Bus Bar with colour coded heat

shrinkable steeve - 1 set

Outgoing comprising of :

63 amps 4 Pole MCB - 17 Set

FEEDER PILLAR-OUTDOOR TYPE (VILLA) described as above Set 204956 7 1434692 0 0 7 1434692

SUBHEAD:-Street Light Pole

Street Light Pole:-

Supply, installation, Testing & commissioning of steel tubular swaged poles with

bent on top along with reaquired accesseries to accomodate street light fitting

complete with cast iron base plate, finial taper plug, bolts, nuts, junction box within

the pole for incoming and outgoing cables (size up to 2 C x 6 Sqmm) and a 10

amps SP MCB and screws as required - 4.5 mtr. Long. Rate shall included the

cost of inbuilt junction box (weather proof), MCB to fitting with 2.5 sq mm copper

wires (2 Nos. 2.5 Sq.mm copper wire for phase & 1 No. 1.5 Sq.mm copper wire for

earthing) complete with base plate made from concrete civil foundation works .

The pole shall be painted with final PU Paint as required.

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Street Light Supply,Receiving and fixing in position, effecting proper connections,

testing and commissioning of 1x 50W decorative street LED light fixtures for

outdoor lighting Luminaire on existing 4.5 Mtr pole as per specifications,complete

32.0 MR21 in all repects including nipple for fixing of Light fixture on pole. Nos 6921 60 415260 35 242235 95 657495

Havells:- 6500 K LHEXAYP7PN6K050 9405

SUBHEAD:- STREET LIGHT CABLE

Laying & Termination of the following sizes of XLPE insulated Aluminium/ Copper

conductor cable including providing terminal lugs,double compression gland ,

crimping the joints ,providing insulation tape,effecting terminal connections to the

equipment complete as required.

33.0 MR22 3 x 6 sq,mm, Al conductor cable Nos. 775 500 387500 0 0 500 387500

Providing and fixing UPVC pipes as per IS:13592 suitable for 6 Kg/ sq cm

pressure, including all fittings with accessories i.e bends, junctions, cowls, offsets,

PVC pipe clips/holders etc. and jointing with rubber rings and cement solvent

complete as per manufacturer's specifications with excavation, refilling and

disposal of surplus earth, including cutting holes in walls and floors ,wherever

required and making good the same, complete as directed by the Engineer-in-

Supply, Installation, Testing & Commissioning of IP CCTV 3MP Varifocal Bullet -

3mp @ 25 fps, H.264 Compression, 1/3" Low Illumination Aptina Cmos, Hisilicon

DSP, IP Bullet Camera with 3 megapixel HD 2.8 - 12mm Lens, 48 IR LED upto 35

meters, Supports iOS & Android Apps. Supports ONVIF. IP66 Protection Rating.

Supports POE. Should support rest all features of IP camera such as Multi

Streaming, Image Snapshot, Full Screen Monitoring, Supports CBR & VBR,

Motion Alarm, Online Users upto 10, Video Format in AVI & JPEG, Supports Video

Playback and Delete. Supports D-WDR, 3D-DNR, ICR, Brightness, Contrast, Hue,

Night Mode, Supports TCP/IP, UDP, DHCP, FTP, DDNS, PPPoE, Supports Cell

phone, PDA, 3GPP. etc. all complete (App Make: Axis / Urmet / Sony)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

Streaming System: Control Room Equipments: 6U RACK IT INDUSTRY

STANDARD RACK with ventilation, sliding shelves, power strips, etc. all

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

37.0 MR26 Streaming System: Control Room Equipments: Special Surveillance 4TB 3.5" EACH 10177 1 10177 0 0 1 10177

SATA HDD internal( For Servers). etc. all complete. (App Make: Seagate / WD)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

Streaming System: Control Room Equipments: 24 Port L2 Managed 10/100/1000

Mbps Switch, Rack Mountable etc. all complete. (App Make Dlink / Netgear /

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

Streaming System: Control Room Equipments 24 Port Unmanaged POE

10/100/1000 Mbps Switch, Rack Mountable etc. all complete. etc. all complete.

(App Make Dlink / Netgear / Cisco)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

Streaming System: Cat6 Unarmoured Cable for POE purpose. 10-Gigabit

40.0 MR29 Ethernet speed with frequency upto 500 MHz. Max cable length of 90 meters RM 37 800 29600 0 0 800 29600

(Quantity in running Meter) etc. all complete. (App Make Finolex / Panduit /

Digitally signed by MOHD

"Repair/Modification and Upgradation of Civil, MEP etc. works of 02 Amrapali projects i.e., Silicon City -1 Leisure Valley Villas" on Percentage Rate Basis

Supply, installation, testing and commissioning of Network Video Recorder , Live

view/Resolution 5MP/3MP/1080p/720p,Motion Detection Control Privacy Mask

Control. USB interface-1 × USB 2.0 and 1 × USB 3.0,Security-HTTPS, SSL,

Watermark, User Authentication, Miscellaneous-N+1 hot spare. Alarm in/out -4 /

1,Network interface-1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface,

41.0 MR30 Security-HTTPS, SSL,Video/Audio output-VAG,HDMI and Audio. Watermark, User EACH 87128 1 87128 0 0 1 87128

Authentication,Incoming bandwidth-100Mbps,Outgoing bandwidth-80Mbps,HDMI

output,VGA Output,Protocol-IPv4, IPv6, TCP/IP protocol, PPPoE, DHCP, DNS,

DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.TCP, UDP

and RTP for unicast, UPnPTM, ONVIF, PSIA,Support 16 IP Camera, 2 SATA

interfaces for 4 HDDs Upto 4TB for each disk.

Supplying, Installation,Testing & Commissioning of 32" LED Full HD TV Resolution

1920 x 1080 ,Contrast Ratio (Typical) 5000:1,Built-in Speaker (10W + 10W),

Magic Clone (to USB), Auto Source Switching & Recovery, Lamp Error Detection,

Super Clear Coating, Temperature Sensor, Plug and Play (DDC2B), Pivot

Display, Clock Battery, PIP/PBP, Video Wall (10x10), Image Rotation, Button

Lock, HDCP Support, Smart Scheduling, Smart F/W update, Built-In MagicInfo

Premium-Swith Mounting Brackets as per Technical Specification complete in all

Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper

conductor armoured cables suitable for working voltage upto and including 1100

Volts complete as required and as per specifications.

TOTAL OF DSR & NDSR TEMS 24618548.67 12442766.33 37061315

Digitally signed by MOHD