Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance D 5 1 RANA PRATAP BAGH DELHI 110007 | NORTH | DELHI | 110007 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance HOUSE NO 3031 2 SECTOR 44 D CHANDIGARH CHANDIGARH CHANDIGARH CHANDIGARH 160047 | CHANDIGARH | CHANDIGARH | 160047 | Admitted-Finance |
Tender Value
₹10.7 L
EMD Value
₹26,626
Closing Date
16 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SA, ASI, CHANDIGARH
SA, ASI, CHANDIGARH CIRCLE, CHANDIGARH
PROVIDING PORTA TOILET, TOURIST FACILITIES AT SUMMER PALACE OF MAHARAJA RANJIT SINGH AND ILLUMINATION OF SOUTHERN GATE FOR G20 EVENTS IN AMRITSAR
2023_ASI_738435_1
3/36/MW/2022/CHD
Open Tender
Civil Works
Works
AMRITSAR
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
GM ASI
₹26,626
Yes
21 Feb 2023
2 Feb 2023
17 Feb 2023
2 Feb 2023
16 Feb 2023
2 Feb 2023
Amount
Description and specification of items
Providing and fixing of 100mm thick sand stone (matching Stone) bench with top size 1.50x0.60m and two vertical support stone of size 0.45m with molding etc. complete as per design. (Drawing attached)
Removing white wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Provision for lime punning of 3mm thick coating mixed with marble dust and adhesive material like batasa, white gum, urad dal etc. including grinding and rubbing complete.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform
Providing 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality HD–20 Circular shape 560 mm internal diameter
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Provision for providing and installing portable toilet cabin of size 4.50m (L) x 1.50m (W) x 2.50m (H) with 2 no. of partition to make attached 3 toilet cabins for male, female and differently abled as per specifications including installation of plumbing and electrical items complete as given below. WALLS & PARTITION: 40mm thickness machine made puff insulated panels with both side water and rust proof pre-painted GI sheet inside and outside. Thick layer of PU foam of density of 40±2 kg/m3 as insulation. ROOF: Roof will be back side slope having taper at back from front. Roof will have puff insulated panel having colour coated on the top and bottom will have plain pre painted GI sheet. Thick layer of PU foam of density of 40±2 kg/m3 as insulation. Panels have overlapping system so that water cannot come inside the cabin. Insulated roofing panel will be fixed. Floor Floor will be of MS tube frame having water proof panel cement board panel. Door Pre painted GI doors with complete SS 304 hinge lock set of appropriate size along with handle will be provided with compete fittings. Door will have inside tower bolt and outside will have L drop. Weather Shed: All doors opening and exhaust fan opening shall be provided with weather shed. Plumbing: Complete necessary internal plumbing fitting along with approved brand and quality items given below: 01 No. of PVC Water Tank 1000 lt. 03 No. of WC seat, 03 No. of wash basin, 03 No. of towel stand, 03 No. of soap stand, 03 No. of mirror, Electrical Complete necessary internal wiring and fitting along with approved brand and quality items given below 03 No. of exhaust fan, 03 No. of LED bulb, 03 No. of 6AMP switch, 01 No. of bulk head
Provision for providing and fixing MS gate of size 5.8m x 1.8m with 16mm square MS bars having 10cm c/c spacing embodied on MS angle frame 50x50x6mm.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage
Illumination of Southern Gate (Ram Bagh Deodi) all four sides along with gumtis and Baradari as per direction of site incharge with warm LED lights and G20 logo. Installation and removal of all fixtures including genset with diesel from 14 March to 17 March 2023 on occasion of G20 event (on rent basis) (1x4)
Providing drone videography and photography of illumination as required from 14 march to 17 march 2023 on occasion of G20 event. (1x1)
Parveen Kumar Contractor
AKSHIT BUILDERS
M/S DALJIT SINGH
Bidder Name
Parveen Kumar Contractor
M/S DALJIT SINGH
AKSHIT BUILDERS
sanjeev prashar
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .