Painting and cleaning of premises for safety-fortnight at Mine No.1,2,3 and Adasa UG to OC mine of Saoner Sub Area.

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing sills of polishedKadappa stone 25mm to 30mm thick, on a bed of 1:4 cementmortar including cement float, fillingjointswith slurry, curing polishing and cleaning etc. complete.

Providing and laying Antiskid Ceramic tiles of approved quality ofsize30cmx30cm andconfirmingtoIS15622-2006(Group-BIIA)for anti skid flooring in required position laid on a bedof1:4cement mortar includingcementfloat, fillingjointwithcementslurry cleaning curing etc. complete.

Providing and erecting chainlink fencing 1.6M. height with G.I.chain link of size 50 x 50mm, 8gauge thick and fixed 75mm above ground level on vertical M.S.Angles of40 x40x6mm size, includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm.at1.75M.c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30cm c/c with nuts and bolts and horizontal M.S.Anglesat top and bottom of 25x25x5mm size and vertical M.S. flat 35x5mm and 25x5mm horizontal including crosss up port of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670mm including 3 coats of oil painting etc. complete.

Total impact of GST for the purpose of CTC