Provision of Electrical work at different sites under AE(E) Hauz Khas New Delhi

Amount

Supplying and Fixing following electrical accessories i/c making connections etc complete as reqd (Make: ISI marked) a) 5/6 amp piano type switch

b) 15/16 Amp piano Type switch

c) 3 Pin 5/6 Amp socket outlet

d) 6pin 15/16 amp socket outlet

e) pvc batten up to 1"

f) Electronic Fan Regulator

g) Phenolic Laminated sheet

h) Electronic Chock 36/40 watt

Fixing of 12"/15" sweep shutter type exhaust fan (PVC Body) complete with all accessories i/c making angle frame, grouting in the wall, making good the same etc. complete as reqd.

Supplying and fixing suitable size PVC/GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 Pin, 5/6 amps modular socket outlet and 15/16 amps. modular switch, connections etc. complete as reqd.

Supplying and drawing following size of FR PVC insulated copper cond, single core cable in surface/recessed, steel conduit / PVC batten etc. Complete as reqd. (a) 2 x 4 sq mm + 1 x 4 sq mm earth wire

(b) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire

Supplying and fixing of fancy wall bracket suitable for 1 No LED Lamp etc. complete as reqd.

S/F of 10/20 Watt LED Lamp in the existing wall bracket / lamp holder etc. complete as reqd.

S/F of 7 Watt LED Lamp in the existing wall bracket / lamp holder etc. complete as reqd.

Supplying and Fixing of 25 watt Gate Light i/c connection, testing etc. complete as reqd.

Supplying and Fixing of call bell suitable for operation of 220 V AC supply etc. complete as reqd.

Rewinding and repairing of 0.5 HP single Phase motor pump set i/c dismantling, refixing, P/F accessories, pipe connection, plumbing work etc. complete as reqd.

Rewinding of Burnout AC Mono Block Motor of 1 HP Capacity with ISI approved copper wire of suitable gauge with varnishing of approved make i/c removing from site and taking to the workshop, i/c loading, unloading with removing of connections, reinstallation, making connection etc. as reqd and testing at site and installing with screw, nut bolts etc. complete as reqd.

Rewinding of Burnout AC Mono Block Moter of 5HP Capacity with ISI approved copper wire of suitable gauge with varnishing of approved make i/c removing from site to the workshop i/c loading unloading with removing of connection reinstallation, making 3 phase connection star delta etc. as reqd, testing at site i/c terminal plate connection, Armature winding i/c dynamic balancing of Moter, checking and replacement of magnatic poles i/c making connection to power cable i/c thimbling screw , nut bolts etc complete as reqd.

Fixing of 250 Amp changeover switch operating on 415V, 50 HZ AC supply, fixing on the existing angle iron frame/Panel i/c Pdg fixing nut, bolts, washer, testing and commissioning etc compete as reqd.

Supplying and making end termination for 70 sq mm aluminium cable with thimble etc as reqd.

Supplying and laying following size PVC insulated and PVC sheathed /XLPE armoured cable of 1.1 KV grade on the existing wall/trench/surface i/c saddling /S/F GI clamps, spacers, nut, bolts etc h/w, i/c connection etc complete as reqd. a) 4 x 16 sq.mm Aluminium conductor

Supplying and making end termination for the following size aluminium cable with thimble etc as reqd. a) 4 x 16 sq mm

Dismantalling of 400 Amp rating, TPN, 415 volts, MCCB i/c disconnection of cabling, thimbles, glands etc. complete as reqd. from the existing cubicle Panel /Box complete as required

Fixing 400 Amp rating, TPN, 415 volts, MCCB i/c cabling, thimbles, glands etc. complete as reqd. with connections, testing and commissioning etc in the existing cubicle Panel /Box complete as required

Providing and fixing Mechanical Interlocking for exsisting electrical LT Panel i/c checking testing etc complete as reqd.

Supplying of following Electrical Accessories suitable for 230V 50 Hz AC supply system for use in the exsisting electrical fitting etc as reqd. a) Electronic Chok 36 watt

S/F of Electronic 3 phase 4 wired KWH meter in the existing panel, Meters should be suitable for 3 phase/ single phase load 415 / 230 Volts AC supply including supplying and fixing suitable CTs 100/5 Amp load. Make - L&T (Model - ER300P WR300BC5200)

Supplying and fixing of 60/70 watt LED Street Light pressure die cast aluminium Street light luminaire on wall / surface including conncetion earthing the body as reqd. (M/S HPL, Bajaj, Wipro, Philips /Syska /Crompton make).

Providing and fixing of GI pole of suitable dia to hold the fitting with wall bracket etc complete as reqd.

Star Electric Works

BK Engineers India