Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹24.2 L+₹1.5 L (6.56%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹24.9 L+₹2.2 L (9.47%)Rejected-Finance NEAR DON BOSCO SCHOOL MORE NA ATALIKA APARTMENT SEVOKE ROAD SILIGURI PIN 734001 WB | SILIGURI | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | Rejected-Technical BEHIND CENTRAL BANK OF INDIA PO KADAMTALA DIST DARJEELING PIN 734011 WB | DARJEELING | WEST BENGAL | 734011 | - | Rejected-Technical Not recommended due to not enlisted in appropriate category |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
31 Oct 2020, 6:00 pmClosed
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi,Dist-Darjeeling
GE/BENG/44 OF 2020-21 CERTAIN REPAIR TO MANHOLE, SEPTIC TANK, SEWAGE LINE ETC AREA UNDER AGE B/R-II OF GE BENGDUBI
2020_MES_383126_1
GE/BENG/44 OF 2020-21
Open Tender
Civil Works
Item Rate
330 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(ii)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹60,000
Yes
4 Dec 2020
5 Oct 2020
3 Nov 2020
5 Oct 2020
31 Oct 2020
19 Oct 2020
7 Oct 2020 - 12 Oct 2020
Amount
SCHEDULE 'A'
Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
Cleaning / clearance of blocked WC (any type) at any floor from WC to first manhole and making the drain pipe fully functional by flushing with water to the entire satisfaction of Engr-in-Charge, including disposal of sludge / waste materials upto 50 mtr and burrying the same in a pit complete all as specified and directed. Note: - (a) Cost of excavation and removal of surplus soil for pit for burrying the wastes/sludgs etc shall deemed to be included in the unit rate. (b) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-Charge without any extra cost.
Cleaning / clearance of blocked kitchens, bathroom, WHB from Nahani /floor trap to gully trap / Ist manhole and making the drain pipe full functional by flushing with water to the entire satisfaction of Engineer-in-Charge, including disposal of sludge /waste material upto 50m and burrying the same in a pit complete all as specified and directed. Note: - (a) Cost of excavation and removal of surplus soil of pit for burrying the wastes/sludgs etc shall deemed to be included in the unit rate. (b) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-Charge without any extra cost.
Cleaning of blocked pipe from Floor trap/Nahani trap, Gully trap, water closet and CI pipe upto First manholes by removing the sludge/mud,silt both organic and inorganic nature including any type of forign materialand removing waste material slaudge etc to a distance exceeding 50 mtrs and sealing the sides of traps in bath/kitchen using Aqua TS of 'Aquashield water proofing' or equivalent, any damage caused during cleaning shall be made for smooth functioning and madde good by the contractor to the entire satisfaction of Engineer-in-Charge.
Dewatering of septic tank/soakage well including sludge of any depth and description by manual or with sewage pump and sewage tanker after pluging of incoming sewage line and throwing water into non residential area or in drain/nallaha complete all as specified and directed.
M&L for cleaning of man holes not exc 1.5 mtr deep and removing slaudge/waste material to distance n.exc 50 mtr and burying in pits and refilling the same complete all as specified and as directed. (Note: The cost for excavation and earth work for pits is deemed to be included in the unit rate)
Ditto all as per serial item no 8.00 above but exceeding 1.5 mtr deep not exceeding 3.0 mtr.
Ditto all as per serial item no 8.00 above but exceeding 3 mtr deep and above.
Cleaning of underground drain pipe of 150 mm bore including manholes by rodding from manhole to manhole, manhole to septic tank, flushing with water taking out sludge and other materials blocking the drain pipes, carrying/removing the same outside the defence land complete all as specified and directed.
Cleaning of underground drain pipe of 200 mm bore including manholes by rodding from manhole to manhole, manhole to septic tank, flushing with water taking out sludge and other materials blocking the drain pipes, carrying/removing the same outside the defence land complete all as specified and directed.
Cleaning of underground drain pipe of 300 mm bore including manholes by rodding from manhole to manhole, manhole to septic tank, flushing with water taking out sludge and other materials blocking the drain pipes, carrying/removing the same outside the defence land complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.
Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-2 (using 40 mm graded crushed stone aggregates) as in surface channel and drain complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in cills, coping, apex stone, bed plates and lintel upto 1.6m clear span etc including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
M&L for precast reinforced cement concrete1:2:4, Type B-1 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4 complete all as specified and directed. (Note: - Reinforcement shall be measured and paid separately)
M&L for Reinforced cement concrete 1:2:4, type B-1(using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note: - Reinforcement shall be measured and paid separately.)
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
Supply only liquid water proofing compound of approved quality complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed.
Ditto all as per serial item No 24.00 here-in-before but except bricks complete all as specified and directed. (Note: - Old bricks obtained against demolition shall be used.)
Use and waste of form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work not exceeding 200mm thick (horizontal or sloping) for rough finish surfaces complete all as specified and directed.
Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)
M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar for any size dia pipes complete all as specified and directed.
M&L for plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 100mm bore pipe complete all as specified and directed.
M&L for plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 150mm bore pipe complete all as specified and directed.
M&L for plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 200mm bore pipe complete all as specified and directed.
M&L for plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 300 mm bore pipe complete all as specified and directed.
M&L for Salt glazed stone ware drain pipe of 100mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.
M&L for Salt glazed stone ware drain pipe of 150mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.
M&L for Salt glazed stone ware drain pipe of 200mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.
M&L for Salt glazed stone ware drain pipe of 300mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.
M&L in repair for cast Iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and directed.
M&L 40mm thick plain cement concrete 1:2:4, type B-1 (20mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in flooring finished even and smooth without using extra cement with spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.
Demucking of filled soil in drains of any size depth or section in any condition as per site requirement and spreading along road side berms complete all as specified and directed.
Cutting/clearing of small plants, bushes, wild vegetation growth and removal of rubbish and other materials upto a distance exc. 50mtr but n. exc 100 mtr complete all as specified and directed.
Note for serial item No 1 to 45: - (i) Contractor shall be provided two nos safaiwala with two helper and they will report at complaint cell/office in the morning by 9:00 Hrs to receive day to day complaints and cost shall be deemed to be included with quoted unit rate. (ii) All the sewage pump, tool and plant and other allied arrangement for making sewage line functional will be made by the contractor without any extra cost to the Govt and cost shall be deemed to be included with quoted unit rate. (iii) The details of Safai wala shall be submitted by the contractor to GE through Engineer-in-charge Name, Father’s name, Full address with passport size photo, covid test and insurance of employees (Safai wala) within 15 days commencement of work alongwith insurance from Govt Agency. (iv) Details of bldgs Nos or location/position of septic tank, manhole, soakwell shall mentioned against each job in Register. (ii) Complaint should be attend/completed within 48 Hrs after receiving complaint slip failing which a panel recovery @ double the quoted rate of each complaint will recover from contractor dues or become dues(i.e. RAR/FB) (NOTE :- If safaiwala and helper absent from duty, than panel recovery Rs. 600 for one No safaiwala and Rs. 400 for one no helper will recover from contractor dues or become dues(i.e. RAR/FB).)
M&L for Vitreous china squatting pan water closet, orissa pattern, size 580x440mm, white with integral foot rests including 'P' or 'S' trap of same material (excluding flushing cistern and flush pipe), provn of cement concrete/lime concrete and jointing to flush pipe (fixed in repair) and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed.
M&L for Vitreous china wash down water closet pan (Padestal Pattern), (fixed in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc. 0.11 SQM and but n.exc. 0.18 SQM in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, incl Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, incl Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F (in repair) angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed.
S&F as (in repair) bib tap 15 mm bore fancy type cast copper alloy complete all as specified and directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F of 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed.
M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors incl, Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.
S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes, of any dia bore jointed in cement mortar and taking out of trenches, if required.
S&F in repair for 50 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed.
S&F in repair for 75 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed.
S&F in repair for 100 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed.
Ditto all as per item No 60.00 here-in-before but fixing only.
Ditto all as per item No 61.00 here-in-before but fixing only.
Ditto all as per item No 62.00 here-in-before but fixing only.
S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) fitted with oval accesss doors complete all as specified and as directed.
S&F in repair 75 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) fitted with oval accesss doors complete all as specified and as directed
S&F in repair 75 mm bore cast iron of single Tee/Y junction laid and jointed, complete all as specified and sa directed fixed in repair.
S&F in repair 100 mm bore cast iron of single Tee/Y junction laid and jointed, complete all as specified and sa directed fixed in repair.
S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified fixed in repair.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 26,525.00 (refer Tender Srl Page No 30). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
J T ENTERPRISE
M/S AHUJA TRADING
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .