8638 REPAIRS AND REPLACEMENT TO BR NATURE WORK INCLUDING SANITARY, PLUMBING FITTINGS, MANGALORE TILES AND FALSE CEILING IN OTM ACCN, NURSING COLLEGE, OFFRS SERVANT QTRS AND SOUTH CAMPUS OF AFMC IN THE AOR OF AREA B AFMC UNDER GE C PUNE

Amount

M&L for roof tiles, Mangalore pattern, class 'AA', interlocking at side joints, laid dry on slope roof with and including dismantling single layer Mangalore pattern or similar tiles in slope roofing complete all as specified and directed.

Re-fixing only for roof tiles, Mangalore pattern, class 'AA', interlocking at side joints, laid dry on slope roof with and including dismantling single layer Mangalore pattern or similar tiles in slope roofing portions bedded in lime or cement mortar complete all as specified and directed. ( Note : Serviceable items received from dismantling is to be used)

S&F ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 on slope roof with and including dismantling single layer Mangalore pattern or similar tiles in slope roofing portions bedded in lime or cement mortar complete all as specified and directed.

Re-fixing only for ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 on slope roof with and including dismantling single layer Mangalore pattern or similar tiles in slope roofing portions bedded in lime or cement mortar complete all as specified and directed. ( Note : serviceable items received from dismantling is to be used)

S&F Galvanised, corrugated mild steel sheeting of 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 on slope roof with and including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed.

Fixing only Galvanised, corrugated mild steel sheeting pf 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 on slope roof with and including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed. ( Note: serviceable sheets received from dismantling is to be used)

S&F galvanized plain mild steel sheeting 1.00mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275 on slope roof with and including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed.

Fixing only galvanized plain mild steel sheeting 1.00 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275, Except Sheet. on slope roof with and including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed. ( Note serviceable sheets received from dismantling is to be used)

Dismantling timber scantlings 40 sq. cm and over in section, in any position of framed work complete all as specified and directed.

M&L for clean sawn second class hard-wood in timber framed and fixed scantlings complete all as specified and directed.

All as per srl Item No.10 above but except timber

Dismantling battens for tiles, shingles etc of any size including tilting fillets, spaced exc.15 cm complete all as specified and directed.

M&L for 2nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm, fixed with nails complete all as specified and directed.

All as per srl Item No.13 above but fixing only complete all as specified and directed. ( Note : serviceable items received from dismantling is to be used)

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of un-framed work complete all as specified and directed.

M&L for 2nd class hardwood, plain fillets exc 13 Sqcm n exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

M&L for tiles or slate battens, any size and spacing, prepared and treated all over with two coats of creosote oil complete all as specified and directed.

M&L for tiles or slate battens, any size and spacing, prepared and treated all over with one coats of creosote oil complete all as specified and directed.

M&L for preparing new surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

M&L for preparing old surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with, all over with one coats of creosote oil complete all as specified and directed.

M&L for 2nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints as used in eves board / weather board, fixed with nails in any situation with and including dismantling boarding of any description fixed in any position with nails, with or without cover fillets complete all as specified and directed.

Fixing only for 2nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, as used in eves board / weather board, fixed with nails in any situation with and including dismantling boarding of any description fixed in any position with nails, with or without cover fillets complete all as specified and directed. ( Note serviceable items received from dismantling is to be used)

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for complete removal of old existing treatment and preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:2:4) type- B-0 (using 12.5 mm graded stone aggregate) as in roof kerbs, rounded or chamfered on edges, including necessary form work complete all as specified and directed.

M&L for filleting in any position & to any shape, sectional area exc.25 but n. exc. 50 sqcm in CM 1:4 including all mitres, stops etc, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with flyash bricks straight or curved on plan exc 6 m mean raidus built in old size bricks cm 1:4 complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 12 mm thick in CM 1:6 on fair face of brick /concrete surfaces of any description and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) when surface of green and finishing with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over 2mm thick wall care putty complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over 2mm thick wall care putty with and including complete removal of existing treatment of any layer of wall complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with and including preparing new plastered or unplastered surfaces of walls complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces wwith and including complete removal of existing treatment of any layer of wall and prepariing complete all as specified and directed.

Dismantling of boarding, any description fixed in any position with nails i.e. false ceiling and wall lining etc and similar position fixed with screws complete all as specified and directed.

S&F in true horizonal level false ceiling using non asbestos (fibre cement) pre-painted decorative tiles of size 595x595x4mm thick manufactured by V- Board or techno commercially equivalent including GI snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c & Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire with and including dismantling of boarding, any description fixed in any position with nails i.e. false ceiling and wall lining etc and similar position fixed with screws complete all as specified and directed.

All as per srl item No 39 above but refixing only of any type of ceiling sheet .

M&L for applying two or more coats of 100% premium Apex roof tile waterproofing guard paint Alkali & fungal resistance, dirt resistance exterior roof tile waterproofing guard paint of required shade (Company Depot Tinted) over and including priming coat of same make as per manufacture's instructions over new / old surfaces with and including preparing new /old manglore tile surfaceon slope roof surface complete all as specified and directed. (Note : Consumption of paint and primer per sqm will be followed as per manufacture's instructions of Asian paints or techno commercially equivalent).

Taking down chowkat or frames (any type) exc 1.5 sqm & n. exc 4 Sqm with shutters (without taking off shutters from the frames & removing from site including making good to disturbed jambs complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and directed.

Taking down shutters of any description, exc 1sq.m and n.exc 2 sq.m each and removal from site etc complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specifications and drawing complete all as specified and directed.

S&F stainless steel butt hinges medium weight of size 125 mm fixed with stainless screws complete all as specified and directed.

S&F 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F extruded stainless steel handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F in repairs 200mm size stainless steel, barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 100mm long stainless steel floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with and including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws with and including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed.

S&F in repairs stainless steel butt hinges medium weight of size 125 mm fixed with stainless screws complete all as specified and directed.

S&F in repairs 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 200mm size stainless steel, barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs extruded stainless steel handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Supply and fixing powder coated aluminum (minimum thickness of powder coating 50 micron) work in (any colour) for Sliding window three track made of extruded profiles. Window profile with hollow section with multi chamber. Window having three shutters consisting to 02 x sliding sash to recive glass, 01 x sliding sash to receive wire mesh, sliding interlock (One vertical length in each shutter), Glazing bead will be mitred cut at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of window section /hardware by using modern technique with and including EPDM gasket, steel roller system, touch Lock of zinc alloyed of same colour of window powder coated and other required materials/ accessories will be provided for creation to window and frame will be fixed to the any type wall by using fasteners / screws of required dia and size complete all as specified and directed. Note: The unit rate quoted by contractor includes the cost of 4 mm thick tinted glass & stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing and all other connected accessories. Before creation of window, the sample of all materials / accessories / hardware confroming to make of 'JINDAL' catalogue No. Bottom frame 20620, Top frame & vertical 20621, Shutter top & bottom 20844, Handle (side) 20606, Shutter inter lock 20724, & Glazing Clip 19352 or techno commercially equivalent make will be submitted to Engr-in-Charge for weighing of powder coated window section and approval of materials / accessories / hardware.

M&L for powder coating anodised aluminium frame for doors, windows, ventilators ((minimum thickness of powder coating 50 micron)) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work in any colour for single leaf swing type aluminium door (openable one / both sides) fixed with any type door frame work including appropriate heavy duty fixing materials such as 01 x Top & bottom Pivot, 01 x floorsprings, mortise door handle lock vertical type size 100mm of brass body 4 lever etc and One set of 15-16mm dia SS brush finish pull & push handles (approx 200mm length) "C" shape of approved make & design on both sides of approved make Godrej / Everite/Ozone/Hardwyn/Dorma or techno commercially equivalent with and including 5.5mm thick clear glass & providing with pasting one side forasted computerised films on glass as per design provides during sample approval of door with clips aluminium, beads, filling gaps at junctions at top, bottom & sides with required EPDM rubber/neoprene gasket etc. Note : The rate to include all materials, labour, transport, taxess, delivered and placed in position at site of work. Each door shall be treated individually with complete set of accessories to be provided on each door, complete all as specified and directed. Before creation of door, the sample of all materials / accessories / hardware confroming to make of 'JINDAL' catalogue No. Both vertical Shutter :19501, Shutter top rail : 19503, Shutter Middle rail : 20060, Shutter Bottom rail : 19511, Glazing clips : 19352 or techno commercially equivalent make will be submitted to Engr-in-Charge for weighing of powder coated door section and approval of materials / accessories / hardware.

S&F in repairs powder coated aluminum partition (minimum thickness of powder coating 50 micron) work in any colour with and inculding using 12 mm thick prelaminated particle board of choice colour in bottom panel and 5.5mm thick frosted/design/clear/tinted glass in top panel fixed with clips aluminium, beads, filling gaps at junctions at top, bottom & sides with required EPDM rubber/neoprene gasket etc., centre to centre distance of vertical member shall n.exc 1mtr and horizontal member shall n.exc 1.10 mtr using following aluminum powder coated section as specified in Jindal Catalogue (a) SP – 20048, (b) DP - 20047 (c) Glazing clips - 19352 or techno commercially equivalent.

M&L for resecuring or easing & adjusting of aluminium door / wooden door shutter (area of door shutter not exc 2.00 Sqm) with or without taking down shutter from existing frame for petty repairs like adjusting hinges, handle during execution of civil works and making the shutter fully functional complete all as specified and directed. Note : taking down door shutters will be kept in site store carefully (if required) by the Contractor own arrangement till completion to civil works and re-fixing on same opening as per direction of Engr-in-Charge if any damage noted by the Engr-in-Charge the contractor will be rectified / repaired the damage part / area of shutter own cost.

Dismantling boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and directed.

S&F 12 mm thick (7 ply) veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and directed.

S&F 18 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs 30mm width of flap stainless steel continious (piano) hinges for built in cup board shutter as approved complete all as specified and directed.

S&F in repairs Softclose hinges for cabinet and cupboard (any crank as per site requirement) of Make Godrej or techno commercially equivalent complete all as specified and directed.

S&F in repairs stainless steel anodised handles, fabricated type of size 100 mm complete all as specified and directed.

S&F in repairs magnetic catcher for cabinets complete all as specified and directed.

S&F in repairs premium heavy duty mortise door handle lock, vertical type size 100mm of brass body, 4 lever "Link" make and fixed complete all as specified and directed

S&F in repairs premium heavy duty suitable size stainless steel lock any type as required for cupboard / cabinet lock of make Godrej / Link or techno commercially equivalent complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for complete removal of old existing treatment and preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs harrison rails (Curtain rod/drapery rod), 20mm dia, stainless steel with and including fancy type stainless bracket / wall to wall 02 Nos of each opening and stainless steel side stopper fancy type of required shape and size 2 Nos of each opening complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 25mm average thickness (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for non skid coloured designer ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

All as per srl item No.82 above but on skirting over with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for 10 mm thick virified ceramic designer pattern tiles ( light shade premium quality) (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per srl item No.84 above but on skirting laid over with and including 10mm thick backing coat in CM 1:4 and tringular filleting in CM 1:6 on top of tiles complete all as specified and directed.

M&L for non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed.

M&L for Green Marble (of any type), 18-20 mm thick machine cut laid over cement screed as in floor /tread etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the green marble stone including cutting and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.

M&L for Green Marble (of any type), 18-20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of green marble stone including grinding and polishing complete with and including with & including backing coat in 10mm thick CM (1:3) to receive granite complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as specified and directed. and specified

M&L for 18- 20mm thick granite (of any type and shade) work table rubbed and pre polished as used in cooking / working platforms, staircase incl riser & tread, steps, jambs, pillars, windowcills, partition and similar work in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite with including 15mm thick backing coat in CM (1:4) including tringular filleting in CM 1:6 on top of tiles complete all as specified and directed by Engr-in-Charge. complete and ensure best adhesion to surface complete all as specified and directed.

M&L for hand cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for hand cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM (1:4) and tringular filleting in CM 1:6 on top of kota at required place complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for mirror polishing on new / existing of marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

Dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs complete all as specified and directed.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fixed in repairs 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement with and including taking up or down 15mm bore steel / composite / UPVC /CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and laying of CPVC pipes (outer dia of pipe 20mm) SDR 11 with and including brass & plain CPVC SDR 11 fittings such as elbow, socket, tee, FTA/MTA & etc MS clamps / clips and necessary screwing as required tod fixed with or without concealed to walls with and including making good to required surfaces as per site requirement on walls/ceiling or laying in floors with and including taking up or down 15mm bore steel / composite / UPVC /CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and laying of CPVC pipes (outer dia of pipe 25mm) SDR 11 with and including brass & plain CPVC SDR 11 fittings such as elbow, socket, tee, FTA/MTA & etc MS clamps / clips and necessary screwing as required tod fixed with or without concealed to walls with and including making good to required surfaces as per site requirement on walls/ceiling or laying in floors with and including taking up or down 15mm bore steel / composite / UPVC /CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth with and including taking up or down 15mm bore steel / composite / UPVC /CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors with and including taking up or down 20mm bore steel / composite / UPVC /CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, jet spray, connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed.

S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.

S&F in repairs Oval shape (netural colour) vitreous chaina below counter basin of size 510 x 415 x 190mm, Cat No C0419 including 32mm full thread CP waste coupling, Cat No T9911A1 and bolltle traps / connection hose (Polymer P Trap), Cat Part No. C830899 and CP Pillar Cock Swan Neck, Cat Part No. G4803A1 of Parryware Make or techno commercially equivalent complete all as specified and directed.

S&F in repairs Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling & waste pipe as suitable complete all as specified and directed.

S&F in repairs 15 mm bib tap ( fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm angle cock ( fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs stop cock of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm two way bib tap ( fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repairs chromimum plated 15mm bore pillar taps with capstan head (but fancy type) screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nuts screwed for iron pipe and fixed all as specified.

S&F in repairs Wall Mixer 2-in-1 System with Bend Pipe & Aerator complete all as specified and directed. Make : Cat No. G4016A1 of make Parryware or techno commercially equivalent.

S&F in repairs CP Central Hole Basin Mixer without Pop-up complete all as specified and directed by Engr-in-Charge. Make : Cat No. T4214A1 of make Parryware or techno commercially equivalent.

S&F in repairs chromium plated toilet paper holder with cover, Cat No T6414A1 of make Parryware or techno commercially equivalent complete all as specified and directed.

S&F in repairs, brass CP soap dish conforming to CAT No. T6403A1 Parryware or techno commercially equivalent make specified here-in-after complete all as specified and directed.

S&F as in repairs CP towel rail conforming to CAT No. T6501A1 of "Parryware" or of techno commercially equivalent make specified here in after complete all as specified and directed.

S&F CP towel ring conforming to CAT No. T6002A1 of "Parryware" or of techno commercially equivalent make specified here in after complete all as specified and directed.

S&F in repairs health faucet with hose & hook conforming to CAT No. E8352A1 of make "Parryware" or techno commercially equivalent complete all as specified and directed.

S&F in repairs single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed.

Dismantling of cast iron / PVC pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 40mm bore pipe Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid on wall and trenches complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

M&L for bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay), heavy for large gates; hook and pintle hinges: large hasp and staples, chains, hand made sliding bolt clamps, hold fast; wall ties: hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafter knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe.290, Gde-E-165 complete all as specified and directed.

S&F sheet glass 3.00 mm thick ordinary quality and glazing with oil putty in square/ rectangle n.exc 0.5 Sqm in each pane with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:- (i) cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 50mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or techno commercially equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seppage and where dampness / seppage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or techno commercially equivalent make in Fosroc / Thremax as approved by GE. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or techno commercially equivalent make in Fosroc / Thremax / SIKA as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemnt: Sika Fab-1 or or techno commercially equivalent make in Fosroc / Thremax / SIKA as approved by GE over base coat as per mnaufacturer's instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or techno commercially equivalent make in Fosroc / Thremax/ SIKA as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and injuctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint . (viii) The sunken floor shall be filled with lean concrete 1:7:12. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L for is inclued in the rates quoted above (ii) For payment purpose, the plan area of sunken floor shall be measured.

M&L for complete removal of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and PCC padding and clean the surface with wire brush and washing with water to achieve the original surface of slab all as specified and directed and M&L for water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and directed by Engr-in-charge. (a) M&L for 50mm avg thickness PCC 1:2:4 type B0 (by using stone aggregate size 12.5mm) as used in padding on the roof surface to provide proper slope towards the rain water pipe and laying 10 mm thick plaster screed bed layer in CM 1:3 on green concrete surfaces by using Water proofing compound @ manufactures instructions of SIKA/ Doctor FIXIT (b) preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and evenly applying one coat of oil based cold bituminous primer @ 0.7Kg per Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.6 Kg/Sqm and 3 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and directed by Engr-in-charge.

M/S Abhishek Builders (BID ID -3432566)

M/s Omkar Associates (BID ID -3439382)

Parhar Enterprise (BID ID -3433290)

Gauri Associates (BID ID -3433640)

Santosh Pandurang Pise (BID ID -3433564)

SARATH ENTERPRISES (BID ID -3433283)

PAL CONSTRUCTION (BID ID -3433690)