INTERNAL PAINTING TO WALLS, CEILING, DOORS, WINDOWS ETC INCLUDING MINOR REPAIR TO OFFRS MD ACCN UNDER AGE B/R II AT NEW CANTT PRAYAGRAJ.

Amount

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished surface even and smooth without using extra cement complete all as specified

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified

M&L Rendering 10 mm thick in CM 1:3 on ceiling surfaces to be finished even and smooth without using extra cement complete as all specified and directed by Engineer-in-Charge

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of anti fungal exterior emulsion paint (Apex/Weather coat/Weather shield) white or tinted as approved complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer after apply 1-2 mm wall care putty to achieve the smooth surface complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding bur not backing , and removing rubbish off the premises complete all as specified and directed.

M&L for Ist and premium quality of glazed ceramic coloured digital tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured digital tiles 300 mm x 450 mm or 300 mm x 600 mm first and premium quality, 7 to 8 mm thick in vertical surfaces skirting, dados, risers to steps, etc and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10 mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified Ceramic light shade double charged tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F vitrified tiles, coloured, double charged, superior quality 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling and waste pipe complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 555 X 425 mm x 195 mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair Brass chromium plated 32mm bore bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair pillar taps 15mm bore (weight should not be less than 0.665kg), fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only wash hand basin mixer 15mm dia ,chromium plated brass with casted swinging spout including plugging and securing to walls complete all as specified and directed.

S&F in repair central hole wash hand basin mixer 15mm dia ,chromium plated brass for mixing Hot & Cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair sink mixer 15mm dia ,chromium plated brass with casted swinging spout including plugging and securing to walls complete all as specified and directed. Make: Jaguar Cat Part No. CON-319KNB or Equivalent make as specified in P.S.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repair brass chromium plated stop cock / angle valve 15mm bore (weight should not be less than 0.575kg) screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair two way angle valves /tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair rubber door seal 5mm thick,32mm wide, with aluminium strip of size 19mm thick fixed with machine steel screw with washer complete all as specified and directed

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.

S & F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white. seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device, connection to drain (or outgoing pipe) pipe & flushing pipe, anti syphonage pipe etc including making good to floor complete all as specified and directed.

S&F of flushing jet for pedestal pan pattern WC including flexible pipe and brass chromium plated nuts, fixed in repairs complete all as specified and directed.

S&F in repair 4mm thick sheet glass ordinary quality plain / tinted and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified & directed.

S&F in repair 4mm thick sheet glass figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified & directed.

S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed.

S&F soap dish disc (oval) type of stainless steel chromium plated including Chromium plated brass screws and wooden / plastic cleats , complete all as specified and as directed.

S&F in repair health faucet with 1.20 m long flexible CP pipe with wall hook complete with brass nut for EWC complete all as specified and directed.

S&F in repair PVC connection 15 mm size with 2 Nos P.T.M.T nuts of length 450mm complete all as specified .

S&F in repair standard stainless steel grating doom round 125mm size with waste hole(minimum weight 40 grms) complete all as specified and directed.

S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified.

S&F in repair PVC low level flushing cistern 10 liters capacity, symphonic action type, white with inlet, ball valve, float & handle with all fittings and fixtures including brackets and 32 mm dia bore PVC flush pipe complete all as specified and directed

S&F in repair stainless steel connection 600 mm long for hot water outlet supply for geyser complete all as specified & directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples in repair complete all as specified and directed.

S&F in repair corner glass self assembly of 300 mm dia with suitable bracket complete all as specified and directed.

S&F in repair stop valves 15mm (weight should not be less than 0.575kg) bore concealed type cast copper alloy, chromium plated, fancy type with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 200 mm dia towel ring chromium plated complete all as specified and directed.

S&F 600 mm long tubular towel rail , brass chromium plated of 20 mm dia 'D' type complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

S&F 15 mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15 mm dia complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20 mm dia complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

Dismantling water tanks capacity exceeding 250 ltr & not exceeding 500 ltr and removing to store complete all as specified

Dismantling water tanks capacity exceeding 500 ltr & not exceeding 1000 ltr and removing to store complete all as specified

S&F rotational moulded, multilayer HDPE water storage tank of 1000 ltr capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded, multilayer HDPE water storage tank of 500 ltr capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm with access door bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm with access door bore complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal, 110 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal, 75 mm bore with access door complete all as specified and directed.

S& F in repairs wall mixer with provision for over head showers fancy with 15 mm dia and 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed.

Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete all as specified & directed. Note: Kitchen accessories i.e. baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only

Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet complete all as specified & directed.

Supply only in repair stainless steel accessories suitable for kitchen cabinets as under:-

(a) Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/15204 or equivalent make as specified in P.S.

(b) Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/TB/15208 or equivalent make as specified in P.S.

(c) Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/PTH/15206 or equivalent as approved by GE

(d) Stainless steel Partition basket of size 50cmx37cmx16cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/PRT/17206 or equivalent make as specified in P.S.

(e) Stainless steel Cutlery basket of size 50cmx37cmx10cm made of 4mm thick S.S.wire and bottom of S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/CUT/15204 or equivalent make as specified in P.S.

(f) Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/POB/15206 or equivalent make as specified in P.S.

(g) Stainless steel bottom full out of size 50cmx40cmx16cm in two tier made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No FF/BPO/62018 or equivalent make as specified in P.S.

(j) Telescope basket (channel) 18/20inch length extruded MS galvanised over rollers of approved make all as specified & directed.

(k) Magnetic catches with steel body ‘H’ type, fixed to shutter complete.

(m) Brass handle of 150 mm dia fancy type polished bright finish complete.

(n) Brass handle of 100 mm dia fancy type polished bright finish complete

(o) Continuous (Piano) hinges, mild steel , bright finish, 30 mm width of flaps (when open).

S&F for Rolled mild steel hollow sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, posts etc fixed with angle cleats or other connecting plates complete all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges complete.

M&L Prepainted galvalume aluminium zinc coating GI based corrugated colour steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Taking down chowkhat or frame with shutter area not exceeding 1.5 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified & directed.

Taking down chowkhats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified & directed.

Taking down shutters of any description not exc 1 Sqm each and removing from site complete and removing from the site all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but not exc 2.0 Sqm each and removing from site complete and removing from the site all as specified and directed.

Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete all as specified and directed.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete all as specified and directed.

S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other Frames/ Chowkhat of size 65 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

All as per Srl item No. 89 above but of size of frame 65 X 125 mm complete all as specified & directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately)

S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screws etc. complete all as specified & directed.

S&F of 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 5 mm thick leaping alround complete all as specified and directed

M&L for preparation of new wooden surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint on old painted surface of wood over a coat of pink primer of approved brand and shade etc & repairing of scratches, if any, with standard putty & enamel paint, sand papering complete all as specified and directed

M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast, coping erection of posts etc complete all as specified & directed.

M&L mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for galvanised Stainless steel Wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

S&F solid PVC door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with MS tube in opening as per specification and shown in drg in SSR Part -II 2010 complete all as specified and directed

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:) with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt extruded type complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt extruded type complete all as specified and directed.

S&F 125 mm long stainless steel butt hinges, cold rolled, medium weight with SS hinge pin complete all as specified and directed.

S&F 75 mm long mild steel butt hinges with mild steel pin complete all as specified and directed.

S&F 150mm size extruded aluminum handles fabricated type anodised complete all as specified and directed.

S&F 100mm size extruded aluminum handles fabricated type anodised complete all as specified and directed.

S&F casement window grill with net & grill single or multi shutter turn window are made out of UPVc multi cavity frames section 60 X 60 X 2.5 mm suitably reinforced & double multi shutter division are made by using sash mullion having 50 X 64 X 2.5 mm multi cavity UPVC section suitably reinforced with GI and shutter are made also 50X 85 X 2.5 mm UPVC glass section reinforced & welded in corner with EDPM gasket provision for glass & for air tight at frame and outer side of shutter with single glazed window shutter using suitable glass bead with perfect hardware like hinges, handles, stays etc complete. Mosquito mesh shutter is made out of UPVC excluded section of 61X 27X 2 mm with GI channel of 1.2 mm thick , welded in corner mosquito net of GI is filled in shutter with proper required accessoried like Hinges, MS grill of 12 mm square MS bar are inserted in main frame & screwed by hidden screwing system with powder coating etc complete all as specified and directed. Note:- Glazed shutter , float glass thickness not less than 4 mm and wire mesh shutter with SS wire mesh 0.36 mm dia with aperture 1.4 mm shall also be deemed included in quoted rate and no extra payment will be made separately.

All as per Srl item No. 107 above but sliding window two / three track complete all as specified and directed.

S&F UPVC ventilators made out of UPVC multi cavity frame section of 60 X 60 X 2.5 mm suitable reinforced and double multi shutter division are made by using sash mullion having 50X 75X 2.5 mm multi cavity UPVC section suitable reinforced with GI & shutter are made out of 60 X 75X 2.5 mm UPVC section reinforced and welded in corners with TPE gasket provision for glass and for air tight at frames & outer side of shutter with single glazed window shutter using suitable glass bead with perfect hardware like hinges, handle, stays etc complete with MS grill of 12 mm thick round shape are fabricated as per manufacturer and installed in UPVC frame section of 35X 35X 2 mm by drilling and surveying system complete all as specified and directed. Note:- Glazed shutter , float glass thickness not less than 4 mm and wire mesh shutter with SS wire mesh 0.36 mm dia with aperture 1.4 mm shall also be deemed included in quoted rate and no extra payment will be made separately.

Demolition of brick wok built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified

M&L for brick work with sub class B, bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 950 mm x 510 mm with bowl size 410 mm x 410 mm x 230 mm , fixed in repairs complete all as specified and directed.

S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 610 mm x 510 mm with bowl size 560 mm x 460 mm x 240 mm , fixed in repairs complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 600mmx750mmx300mm, made out of 0.63mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair 75mm dia PVC (SWR) floor/Nahani trap with gratings including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and jointed in run lead complete all as specified and directed.

S & F in repairs shower CP fancy type 150 X 150 mm including shower arms complete all as specified and directed.

S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.

S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F of stainless steel sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F in repair 25mm dia stainless steel, curtain rails/ drapery rod including end brackets and end knobs, stops, rollers complete all as specified and directed.

M&L for preparation of old plastered / unplastered surface of wall including cornices etc by brooming down & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc completely and apply one coat of white wash complete all as specified and directed

M&L for preparation of old plastered / unplastered surface of wall including cornices etc by brooming down & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc completely and apply two coats of white wash complete all as specified and directed

M&L for preparation of old plastered / unplastered surface of ceiling including cornices etc by brooming down & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc completely and apply one coat of white wash on ceiling complete all as specified and directed

M&L for preparation of old plastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distempered surface and applying one coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed

M&L for preparation of old plastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distempered surface and applying two coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying two coat of oil emulsion distemper of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed.

M&L for preparation of old wooden painted surface completely & applying one coat of synthetic enamel paint on old painted surface of wood over a coat of pink primer of approved brand and shade etc. by mechanically by paint sprayers machine, repairing of scratches, if any, with standard putty & enamel paint, sand papering complete all as specified and directed

M&L for preparation of old surface of steel and iron materials by brooming down or steel wire brushing ,scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted mechanically by paint sprayers machine complete all as specified and directed

M&L for complete removal of existing finishes of wall including cornices etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower over & including 1-2 mm thick wall care putty to achieve smooth surface complete all as specified and directed. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.

Taking down plaster from edges of RCC chajja or corners where steel reinforcement coming outs and filling with 15mm thick rendering in CM 1:3 and apply two coats of cement base paint over a coat of primer to match with the existing shade/colour of buildings complete all as specified and directed. Note :- Necessary scaffolding upto two story will be provided by contractor and unit rate will be deemed to include this aspect.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding, in leveling course, benching, mud stops etc, complete all as specified and directed

S&F exterior finish designer pavement tiles, coloured, superior quality, 300x300x10mm thick as in floors/ pavement etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F in repair stainless steel peg set of 4 hook complete all as specified and directed.

S&F in repair stainless steel tie rod 300 mm length complete all as specified and directed.

M&L preparation of existing new plastered surfaces and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydraulic water proofing of make Asian on plaster surfaces complete all as specified and as per manufacturer instructions.

Taking down existing switch board / light fitting alongwith its connected accessories to facilitate the tiling & false ceiling work and refixing the same position after execution of the tiling / false ceiling work complete all as specified and directed

Schedule of Credit (MINUS) Rs. 82270.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

M/S JAI DURGA CONSTRUCTION (BID ID -3059369)

Channa Brothers and Co. (BID ID -3058537)

Shivagya Engineering (BID ID -3067725)