REPAIRS TO ROOF SHEETS TRUSSES FALSE CEILING AND OTHER CERTAIN CONNECTED MISC REPAIRS WORKS UNDER AGE BR I OF GE W AGRA

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation) etc or insulation boards/ slabs/ blankets any thickness including cover filletts complete all as specifed & as directed.

Demoition of cement concrete not exc 15 cm thick ness (below or above GL unreinforced) complete all as specified & as directed.

S & F anodised aluminium snap grid frame work for false ceiling compleete all as specified and directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long (removing old hangers) complete all as specified.

S & F exposed metal frame ceiling with calcium silicate board 6 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid complete all as specified & directed. (Frame work for ceiling shall be measured and paid separately)

S & F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified & as directed.

S & F in repair pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and as directed.

Dismantiling of asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings all as specified & as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls andFixed with L-type or J-type or cranked hook bolts all as specified & and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls andFixed with L-type or J-type or cranked hook bolts except sheets all as specified & as directed.

S&F in repairs framed work such as grill grating etc with ends of bars shouldered or riveted or forged into spikes frame guard bars etc all as specified & as directed.

Dismantling timber scantling under 40 sq cm in any position in fillets, rails, posts, rafters, purlins, etc. framed work under 40 sq cm in section all as specified & as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I. S. 1161-1979 gradeSt.240 all as specified & as directed.

M&L in repairs 30mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm and not exceeding 0.5 sqm area fixed with and including one number SS clamps (grade-202) of flat 30mm x 2mm, 150 mm long made to shape in each slab, making 'V' groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment fixing with CM 1:2 thickness min. 10 mm completed as specified and directed. Note: The stone size and colour will be provided as per existing on walls and also finished the joints / grooves even and smooth.

S&F in repair steel rolling shutter of thickness of laths 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type including greasing etc and match to the existing suface with cement work and finishing complete all as specified and directed. Note: Paint will be mesured and paid separatly

M&L without taking off rolling shutter, securing or easing, cleaning/greasing/oiling/ overoiling / welding in gear box, crank handle, rolling spring, channels, ball bearing, pully, adjustment of lock device etc, & any description n.exc 6.00sqm each completed all as specified and directed..

M&L without taking off rolling shutter securing or easing, cleaning/greasing/oiling/ overoiling / welding in gear box, crank handle, rolling spring, channels, ball bearing, pully, adjustment of lock device etc, & any description exc 6.00sqm each complete all as specified and directed.

S&F in repairs MS floor, safety lock suitable for rolling shutter 6 lever goodrej or equivalent with duplicate keys fixed including necessary cement repair complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 but except brick all as specified & as directed.

M&L 50mm thickness PCC 1:3:6, type B-1 (using 20mm graded crushed stone aggregate) as in sub base of plinth protection complete all as specified and as directed.

S&F in repairs roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E 250) quality A complete all as specified and as directed.

Taking down of chowkhats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) (aluminium) complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frame) (aluminium) complete all as specified and as directed.

S&F anodised aluminium frame/shutters for doors, windows & ventilators with one or more rebates including joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, handle, screws, anodised aluminium fittings such as peg stays for fixing etc. complete all as specified. (Note: Sheet glass and veneered board, hinges, lock will be measured and paid separatly)

M&L butt hinges 75 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified & as directed.

S&F automatic floor mounted hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked, complete all as specified & directed. Make: Sandhu or equivalent as approved by GE from list of. Makes.

S&F in repair automatic floor mounted hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked, complete all as specified & directed. Make: Sandhu or equivalent as approved by GE from list of. Makes.

S&F automatic hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked,,suitable for door shutters of 851 to 1000mm in width and of weight between 61 kg to 80 kg complete all as specified & directed. Make: Sandhu or equivalent as approved by GE. from list of. Makes.

S&F in repair automatic hydraulic door closer, heavy duty with pivot, aluminium body, ISI marked,suitable for door shutters of 851 to 1000mm in width and of weight between 61 kg to 80 kg complete all as specified & directed. Make: Sandhu or equivalent as approved by GE. from list of. Makes.

S&F 5.50 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area n exc 0.5 sqm in each plane complete all as specified and directed.

S&F 5.50 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area exc 0.5 sqm in each plane complete all as specified and directed.

S&F 100 mm long Mortice latch with four levers (vertical type), aluminium body and fixed complete all as specified & directed.

S&F in repair 100 mm long Mortice latch with four levers (vertical type) , aluminium body and fixed complete all as specified & directed.

M&L in 12mm thick veneered partcle board exterior grade faced with decorative veneer on both faces including fixing with rubber gasket for aluminium doors

M&L cleaning of existing grit wash plaster by using of suitable chemical as per manufacture instructions and directed any lacation and any area, including scaffolding complete all as specified .

M & L for preparation of new steel surface over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxcide primer complete all as specified and directed.

Cutting, chases, pinning in. making good to facing on brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting exc 20cm girth complete all as specified & as directed.

M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq. m all as specified & as directed.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gm/sqm) land on primed surface by forced application complete all as specified.

M&L PCC 1:2:4 type B1 using 20 mm graded aggregate with integral water proofing compound as per manufacturer instruction finished fair and even in lintels upto 1.5 m clear span, cills steps siesmic and other similar bands, plinth courses etc as directed (Note: WPC will be measured and paid separatly)

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering in cement plaster 15mm thick on fair faces of brick work in cement mortar 1:4 with WPC as per manufacture instructions finished even and smooth w/o using extra cement complete all as specified and directed. (Note: WPC will be measured and paid separatly)

M&L for rendering in cement plaster 10 mm thick on fair faces of brick work in cement mortar 1:6 finished fair & even complete all as specified and directed.

M&L for preparation of newly plastered suraces of wall and applying two coats of oil bound distemper over a coat of 1mm thick Birla putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L for applying two coats of water proofing coating liquid by brush applying in wall surfaces all as directed. Note: Supply only Liquid water proofing compound will be measured & paid separately.

Supply only liquid water proofing compound (mix in cement morter as per manufacture instructions . (Make:- SIKKA/FOSROC).

M/S OMKAR SINGH YADAV

M/S RAJENDRA KUMAR AGARWAL

M/s Pooran Singh and Company

M/S OM Enterprises

M/s J S & SONS

Pushpendra Construction

C P Singh and Co

M/s Tomar Builders