Construction of Entrance Gate Building at Landing Jetty and Development of its surrounding area at JN Port.

Amount

CIVIL WORKS

Covered Parking : Design & detailed engineering (approved by an engineer registered under IstructE, having at least 10 years experience of designing tensile structures and similar roof structures, having authorised copies of non-liner design, analysis and verification software for such structures), supply, transportation, erection at site & commisioning of Tensioned Membrane Structures on MS Circular Pipe structures as per the Architect's drawing including preparation of membrane shop drawing of PVC tensioned membrane Roof structure, aluminium clamp bards, hardware lile bolts, CSK Allen screws, washers, kedar profile extrusion to recive bolts, galanized cables as per Indian standard, PVC coated membrane made from Mehgies / Ferrari / Sattler companies.

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS : 2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of Ultra Techor equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS : 6441 (Part I) - 1972)

Providing and Fixing Italian marble Flooring : Providing and fixing Italian marble (Royal Diana) in flooring, skirting, wall dado etc as approved using 15-20 mm thick required size & pattern and of approved shade, color and texture laid using white cement slurry over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) followed by laying, fixing and jointing, with epoxy and teemax mastic, white cement slurry mixed matching pigment, including rubbing, curing, of approved profile and polishing of mouldings and edges to give hugh gloss finish etc, complete at all levels and as per direction of E-I-C. (Basic rate Rs. 300/sft)

BUILDING FURNITURE

Full height solid partition

Full height solid partition :- Providing and fixing in position Full height solid partition in position as indicated in the drawing excluding the door made out of aluminium hollow sections of 50 mm x 50 mm size 1.5mm thick of LOCAL make as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect. The alternate corner vertical members of the partition shall be taken upto the ceiling level and the same shall be anchored to the ceiling securely with the help of suitable cleats. The framework shall be fixed with 9 mm thick commercial plywood conforming ISI standards and of approved make on both sides e finished with 1.0 mm thick LAMINATE of approved shade and make on both sides with the provision of groove in the same of size 12mm x 12mmx 18

Above glass partition

Low height solid partition:-Providing and fixing in position Low height solid partition in position as indicated in the drawing excluding the door made out of aluminium hollow sections of 50 mm x 50 mm size 1.5mm thick of JINDAL / INDAL make as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center or as directed by the Architect.

DOORS

Single Leaf Toughened Glazed door

Providing and Fixing 10mm Clear toughened glass- with Orno Glass door hardwares- 2 Pivot hinge WPH - 105, Lock WPF-106, H type Handle 25mm X 450mm WPHH-2518(S), Pelmet Arm Door Closer- hold open unit WDCS- 800 with saddle plate WGDSP-106

Glass doors 2000 mm x2100 mm

Fire Door

Metal Fire Rated Doors With 2 Hr Fire Rating With Vision Panel All The Required Hardware - Matrix Make Size :1000 X 2400MM - Single Leaf - Metal Door

Roller blinds

Providing and fixing roller blind with head channel, traversing cord, and warranty etc as per manufacturer's specifications. Fabric to be as per approved sample

LOOSE FURNITURE

INDOOR CHAIRS W450XD350XH900

OUTDOOR CHAIRS W450XD350XH900

4 SEATER CAFÉ TABLE W1350XD700XH460

BAR STOOL DIA=450 H=850

OUTDOOR TABLE DIA 600 H=460

ROUND TABLE DIA=600 H=460

OFFICERS TABLE W1660XD750XH500

VISITOR CHAIR W640XD550XH600

ZAP LX MB CHAIR W640XD550XH600

2 SEATER SOFA W450XD350XH900

6 SEATER SOFA W1500XD600XH900

4 SEATER CAFÉ TABLE W1350XD700XH460

7 SEATER SOFA SET W2425XD550XH600

CUSTOMISED DOUBLE SEATER SOFA W450XD350XH900

ROCKING CHAIR

CUSTOMIZE WHEEL SHAPE CHAIR

KITCHEN

PREPRATION TABLE W1000XD600XH800

SERVING TABLE W2000XD600XH850

STORAGE RACKS W1500XD500XH2500

SINK COUNTER TOP

MEP WORK

SITC of OWC Plant Supply, installation, testing, and commissioning of an Organic Waste Composter plant for on‑site treatment of biodegradable waste. The system includes a waste shredder, mixing/blending unit, and curing arrangements to convert organic waste into compost within a short cycle, ensuring odor‑free, hygienic operation as per SWM Rules.

Capacity - 30 kg/day

Rain Water Harvesting Pit A compact, site-built recharge pit designed to collect and filter rooftop or surface runoff and recharge it into the ground, helping improve groundwater levels. The pit includes graded filter media (pebbles, coarse sand, and activated charcoal) with perforated PVC/HDPE pipe arrangements for effective filtration and percolation. Constructed with durable masonry/ RCC rings/ prefabricated modules as per site requirement, ensuring long service life and low maintenance. Key Features: Efficient rooftop/surface runoff collection and recharge Multi-layer filtration for removal of debris and silt Compact design with high percolation rate Environment-friendly and compliant with local norms

SITC of STP Plant Compact Type MBBR Sewage Treatment Plant The Compact Type MBBR (Moving Bed Biofilm Reactor) STP is a space-efficient, pre-fabricated, and plug‑and‑play wastewater treatment system designed for residential, commercial, and institutional applications. It uses advanced biofilm technology with specially designed carrier media to achieve high treatment efficiency in a small footprint. The system integrates screening, equalization, biological treatment, clarification, and disinfection in a single compact unit, ensuring low energy consumption, minimal maintenance, and compliance with discharge standards as per CPCB norms. Key Features: Compact modular design – easy to install and relocate High BOD, COD, and TSS removal efficiency Durable FRP/MS/SS construction Low sludge generation Fully automatic operation with minimal manpower requirement

Capacity - 12 KLD

EV Car/Bike Charging Point Supply, installation, testing, and commissioning of electric vehicle charging point including charging unit, mounting arrangement, cabling, and protection devices. Suitable for car and two‑wheeler charging, with safety features as per IEC/IS standards and provision for fast/slow charging as specified.

CCTV WORK

Accessories (PVC Box for Camera/RJ 45 clips/HDMI Cable)

ANPR Camera Supply, installation, testing, and commissioning of ANPR (Automatic Number Plate Recognition) camera with high-resolution imaging, IR illumination, and built-in analytics for capturing and recognizing vehicle number plates in day/night conditions. Integrated with VMS/parking/access control systems, suitable for entry/exit automation and traffic monitoring.

ANPR Software Supply, installation, and configuration of Automatic Number Plate Recognition (ANPR) software for real-time vehicle number plate detection, recognition, and database management. Supports integration with ANPR cameras, access control, parking systems, and VMS. Enables whitelist/blacklist management, vehicle logs, alerts, and reporting dashboard with high accuracy.

Supply and installation of branded workstation PC (Dell/HP) for CCTV surveillance system. Includes high-performance processor (Intel i5/i7 or equivalent), minimum 8GB RAM, 1TB HDD/SSD, LAN port, graphics support, and preloaded OS. Suitable for continuous video monitoring, recording, and VMS software operations.

HORTICULTURE WORK

Excavating the ground to a required depth of 90 cms. Removing rubbish & conveying unwanted stuff to a required distance as directed.

GARDEN SOIL :- supplying on site garden soil, well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour the soil generally be red. The soil will be measured by measuring box. (Farma) (Item includes Royalty charges, octroi, Corporation Tax Transporting Loading Unloading etc.) (Lead charges per 26 Km. considered)

FARM YARD MANURE:- supplying on site, well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colour of the manure generally be block. The manure will be measured by measuring box. (Farma) (Item includes Transporting Loading Unloading etc.) (Lead charges per 26 Km. are considered)

Mixing garden soil/silt & manure thoroughly well, watering, previous night. Planting required plant species. Lawn grass as directed etc. complete (1/10 of Semiskilled labour)

Filling fresh garden soil/silt & manure in excavated area including lead up to a distance of 50 mtrs. (1/10 of unskilled labour)

Planting Lawn on Soft/Hard surface:Providing and filling Red Hill Earth &Cow Dung Manure mixing in 2:1proportion, watering to the depth of 1"three times, weeding after every watering before plantation of the grass, leveling, rolling after proper compaction,planting of good quality lawn suckers by dibbling method in staggered fashion at specified intervals including transport &unloading. Watering and proper mowing etc.maintaining for 1 month aftercompletion of plantation and replacement of casualties till 1 month.

Planting Shrubbery on Soft/Hard surface: Filling Red Hill Earth & CowDung Manure in the excavated area mixing in 2:1 proportion, watering, weeding after every watering before planting the shrub, leveling, planting well grown, healthy, bushy shrubs including transport and unloading as per specified variety and sizes, planting at desired location and specified distances, maintaining for 1 month after completion of plantation and replacement of casualties till 1 month.

Supply of Shrubs/medium shrubs Plants/seedings/ saplings with bag size 6-8 inch, should be true to type, healthy, free from diseases & insect, pest attack.All Plants should be well formed & well settled in appropriate size polythene bag / earthen pots according to plant species, rates should be included with transportation, loading unloading and other

Bougainvillea (1m c/c)

Cana indica (0.6m c/c)

Eranthemum (0.45 m c/c)

Xora chinesis (1m c/c)

Red acalypha (0.45m c/c)

Cycus revoluta

Planting Trees on Soft/Hard surface (Individual): Filling of Red Hill Earth,Cow Dung Manure & good earth from excaveted pit in the excavated pits mixing in 2:1:1 proportion,watering after plantation of specified variety, at desired location & at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, leveling the top soil surfaceas specified after plantation, staking to balance the tree. Including transport tothe site & planting , preparation of tree basin, watering & maintaining for 1month after completion of plantationand replacement of casualties till 1 month.

Supply of Trees (Bag size 16"x16", Height= 8-10 Feet)- upply oftrees/ Plants/seedings/ saplings with bag size 16 inch, should be true to type, healthy, free from diseases & insect, pest attack.All Plants should be well formed & well settled in appropriate size polythene bag / earthen pots according to plant species, rates should be included with transportation, loading

Plumeria rubra (3m c/c)

Ficus benjamini (4m c/c)

Topiary tree

Preparing ground covers:- Excavating the ground to a required depth of 20 cms. removing & conveying unwanted stuff, rubbish to the required distance as directed. Filling the Excavated area with fresh garden soil & F.Y. Mnure in 3:1 proportion to a height of 20 cms. Mixing, leveling, watering the same on previous night. Planting suitable ground covers as directed in staggering pattern distance between tow rows 25 cms., watering & maintaining till well established.

Supply of ground covers at 300mm c/c - Plants/seedings/ saplings with bag size 6-8 inch, should be true to type, healthy, free from diseases & insect, pest attack.All Plants should be well formed & well settled in appropriate size polythene bag / earthen pots according to plant species, rates should be included with transportation, loading unloading and other charges.

Petunia (0.3m c/c)-Red

Salvia-Yellow

Verbena-Purple

Dracena variety

Crysanthemum -Yellow

Lantana -Mix

Catharanthus-Mix

Zinnia-Mix

Pachystachys lutea-Yellow

Geranium-Red

Pilea-Green

IRRIGATION WORK

Excavating the ground to a required depth of 90 cms. Removing rubbish & conveying unwanted stuff to a required distance as directed.

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259)(Lift 0-1.5M)

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road includin removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) (Lift 0-1.5M)

Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A- 11/263)

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete

PVC Pipe 110 mm x 10 kg/cm2 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). Make - Jain / prince / Finolex / Kisan / Supreme

PVC Pipe 90 mm x 10 kg/cm2 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). Make - Jain / Finolex / Kisan/Supreme

PVC Pipe 75 mm x 10 kg/cm2 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). Make - Jain / Finolex / Kisan / Supreme

PVC Pipe 63 mm x 10 kg/cm2 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per ISspecification no.4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). Make - Jain / Finolex / Kisan / Supreme

PVC Pipe 50mm x 6kg/cm2 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). (Section-I(II) PVC Pipe 50 mm x 6 kg/cm2 Make - Jain / prince /Finolex / Kisan / Supreme

PVC Pipe 32 mm x 6kg/cm2 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). (Section-I(II) PVC Pipe 32 mm x 6kg/cm2 Make - Jain / prince / Finolex / Kisan/Supreme

PVC Ball Valve 32 mm (Teflon seal) Make - Jain / Plasson / Kisan

PVC Ball Valve 40 mm (Teflon seal) Make - Jain / Plasson / Kisan

PVC flush valve 40 mm Make - Jain / Plasson / Kisan / prince

PVC flush valve 75 mm Make - Jain / Plasson / Kisan

Clean master 25 m3/hr Make - Jain/ Amiad / Kisan/ Metafim

16 mm In-Line Drip Tubing of class-2 with in-built 4 LPH Pressure Compensating (PC) emitters spaced @ 0.6 mtr. Make - Jain /Netafim / Finolex / Rain Bird

16 mm plain drip Tubing of class -2 Make - Jain /Netafim / Finolex / Rain Bird

8 Stations Outdoor Irrigation Controller with 230VAC internal Transformer Make - Hunter /Toro / Nelson / Rain Bird

PVC Service saddle 63 mm x 1/2 '', 10 kg/cm2 Make - Jain / Finolex / Kisan

PVC Service saddle 63 mm x 3/4 '', 10 kg/cm2 Make - Jain / Finolex / Kisan

Elbow 16 mm Make - Jain / Netafim / Finolex

Turbo Line Tee 16 mm Make - Jain / Netafim / Finolex

Tee 16 mm Make - Jain / Netafim / Finolex

Lateral End stop (8 Shape) 16 mm Make - Jain / Netafim / Finolex

Spray Pop-up sprinkler 6'' height with Replacable nozzle of radius 3 to 5 m @ 2.1 bar, Q-0.12 to 0.30 lps (for full circle) with SAM Make - Hunter / Toro /Nelson / Rain Bird

Vertical Openwell Submersible Pump Set - 7.5 HP/ - 2 stage Head - 49 to 21.5 mtrs, Discharge - 200 to 1000 LPM, Make - KSB, Kirloskar, Crompton

Solenoid Valves of size 1" with flow control and Female BSP inlet-Outlet Make - Hunter /Toro / Nelson / Rain Bird

Solenoid Valves of size 1.5" " with flow control and Female BSP inlet-Outlet Make - Hunter /Toro / Nelson / Rain Bird

1 sqm Copper Cable sor Solenoid Valves (Habells HRFRPVC)

2C x 14AWC Cable Plastic Conducting Pipe 25 mm ISI Mark - Make - Diamond, finolex

3/4" Quick Coupling Valve (QCV) of solid brass construction Make - Jain /Harrit / Rain Bird

3/4" QCV Key with hose swivel Elbow arrangement of solid brass construction Make - Jain /Harrit / Rain Bird

1.5" Plastic body Hydraulic Pressure Reducing Valve with Stainless steel spring, shaft & nylon fabric diaphragm. Make - Bermad / Hunter / Nelson/ Rain Bird

Provding and fixing in position and joiting high performance C.I air vavles for water combination type (kinetic air vavle along with automatic air vavle) dobble ball doubble orifice with stainless steel ball , tamper proof air vents rolling seal mechanism for air realease and anti vaccum application designed for 16kg. per Sq.cm Working pressure and tested for 20kg for per sq.cm pressure (rate to include cost of gaskats , bolt , nut , and any other material required for joiting and its transportation etc. Excluding GST levied by GOI and GOM in all respect C.I ARV FLFF PN 1.6 50MM dia

Providing and supplying 50 mm Air Valves single ball flanged/ screwed type PN-1- as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation uptodepartmental stores, unloding and stackingexcluding GST levied by GOI & GOM in all respect etc. complete.

Plumbing all 10KG per cm.sq ISI Mark PVC pipe and Fittings make prince/ finolex / equivalent NR Valve=75mm Non-Return Valve.

80 mm Butterfly valve - (PN-1 with bypass arrangement) Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied byGOI & GOM in all respect etc. excluding C.C.foundation /structural steel support.

80 mm Butterfly valve - Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/ centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Valve Boxes 10", Round shape with openable top green cover Make - Jain /Toro /Nelson/ Rain Bird

Valve Boxes 12", Rectanglar shape with openable top green cover Make - Jain /Toro /Nelson/ Rain Bird

providing , fixing , testing and Commissioning of filltration unit consisting of sand ,screen filtter for a filering capacity of design flow with manual back fulsh unit conforming to IS sepecification complete with all fittings , inculding all labours , if any make JAIN/ amide/ kisan/ metafim/prince Screen Filter Y Type 2.5" metal - 40cumh IS : 12786

providing, fixing, testing and Commissioning of filltration unit consisting of sand , screen filtter for a filering capacity of design flow with manual back fulsh unit conforming to IS sepecification complete with all fittings , inculding all labours , if any make JAIN/ amide/ kisan/ metafim / prince Media Filter 2.5" Horizontal Is 14606 BSP Flanged 100 mic Maximum Operating Pressure 10 kgf. SIL

Grommet Take Off 13 x 16 mm Make - Hunter /Toro / Nelson/ Rain Bird

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no.

PVC Single Union Valve 3/4 '' Male and Female Make - Hunter /Toro / Nelson/ Rain Bird

Supplying and fixing of Y-stainer having 100 mm diameter.Water filter is like watchdog to protect system form Clogging Hazrads. In this sand seperators to remove silt, sand fromwater and Media Filter removes organic impurities like algae, trash, leaves etc.

Supply and Installation Of fertigation Unit. The Injection Of Fertizers/ Chemicals like insecticides, Herbicides and Fungicides into an Irrigation system, It Should be more Controlled and regulated process. Fertigation unit should involves all the necessary Arrangements of mixing, injection, fertigation tank and Controlled supply in All the Aspect to Cover all the Irrigation Area

Flow meter

Providing and filling in sand boxing in pipeline or for foundation with sand of approved quality including watering andcompaction, etc. complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 1000 to 2000 liters

M/S - VIMAL ENTERPRISES (BID ID -3283698)

GREENLAND (BID ID -3284688)

J M Mhatre Infra Pvt.Ltd. (BID ID -3284513)