REPAIR TO FENCING BOUNDARY WALL HARDSTANDING FOOTPATH AND DRAIN ETC AT WCLU HRDC LINE AND COMD HOSP UNDER GE P CH CHANDIMANDIR

Amount

Dismantling, posts or struts(wood, steel or RCC) any section, including taking out embedded portion and making good etc complete all as directed.

Excavation in post holes in hard/dense soil each n.exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as directed

PCC (1:3:6) type C2 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as directed.

MS angle/flat iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc fixed in repairs. complete all as directed. (each line wire measured)

Dismantling chain link fencing of any size complete all as directed.

Chain link fencing of mesh size 100mm x 100mm and dia of 3.20mm bar of approved quality incl rails, straining bolt & binding wire etc complete all as specified and directed by Engr-in-Charge.

Mild steel screw bolts 12 mm dia. (machine made) with hexagonal or square heads at one end screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n.exc 10cm long complete all as directed.

Demolition of Brickwork built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings and precast concrete articles complete all as directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified and directed.

All as per item No. 10 above but except brick

PCC (1:2:4) type B1 (using 20 mm graded aggregate) as in coping / benching complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair without using extra cement complete all directed.

Preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as directed.

Framed work as in gates including pintle hinges, stops, and work shop made sliding bolts etc. confirming to Fe 410-W(Gde-E-250) quality-A all as specified and directed.

Preparation of new steel surface over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Preparation of new steel surfaces n.exc 10cm in width or girth and applying two coats of synthethic enamel paint over a coat of red oxide primer etc complete all as directed.

Demolition of RCC work (reinforced) of any description and any position not otherwise specifically provided complete all as directed.

Formwork to soffits of suspended slabs such as slabs including fair finished surfaces complete all as directed.

RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in slab complete all as specified and directed

Precast RCC (1:2:4) type B1 (20 mm graded crushed stone aggregate) as in cover slabs and similar articles with plain faces set in CM (1:4) complete all as directed.

Providing TMT bars 8mm dia and over, cut to lenth, bent to shape required, including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

All as per item No 22 above but round bars Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165)

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

PCC (1:4:8) Type D-2 (using 40mm graded aggregate) as in foundation, filling, mass concrete and sub-base etc complete all as specified and directed.

100 mm thick PCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in floor finishing cement concrete surface even and smooth using extra cement complete all as directed.

Pre-polished chequered cement concrete tiles 30cm x 30cm x 25mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20mm thick in CM (1:4) etc complete all as directed.

80 mm thick machine pressed precast concrete interlocking paver block of any colour, shape and size confirming to IS 15658-2006 M-40 Grade over and including 50mm thick sand bed complete all as directed.

Kerb stone type B1 (1:2:4) (using 20 mm graded aggregate) of size 300x300x100mm one edge chamfered set and jointed in CM (1:4) as fixed in repair etc complete all as directed.

Preparation of old/new concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of primer complete all as specified and directed.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors fixed in repairs complete all as directed.

M/S Gupta and Sons

MS GURENDER SINGH

m/s krishna engineers1

S.R.SHARMA & SONS

M.P. Builders