Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹46.0 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹47.7 L+₹1.7 L (3.69%)Rejected-Finance 126 NARANG COLONY JANAK PURI NEW DELHI 110058 | NEW DELHI | NEW DELHI | DELHI | 110058 | 2 | Rejected-Finance NOT LOWEST |
Tender Value
₹47.6 L
EMD Value
₹95,240
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM
GE (AF) PALAM DELHI CANTT-10
PROVN OF BRIEFING ROOM AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_609650_1
GENP-45/2023-24
Limited
Civil Works
Item Rate
35 days
GE (AF) PALAM
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹95,240
Yes
21 Aug 2023
19 Jul 2023
28 Jul 2023
19 Jul 2023
27 Jul 2023
21 Jul 2023
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soils.
Removing excavated surplus material (soil) from site to outside MoD land all as specified and directed
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 mtr and making good surface all as specified and as directed.
M&L for cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified.
S&F for rolled mild steel work in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe-290 (Gde E-165) all as specified.
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 all as specified.
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 (Gde E-165) all as specified.
S&F for 38mm thick factory made flush shutter solid core construction with block board core and plywood face panels with 12mm thick german pine wood cladding complete including all fixtures and fittings as per standered Engineering practice like butt hinges, aluminium sliding door bolt 300mm, aluminium handle 150mm, door stopper, tower bolt 150mm etc including frame or chowkhat of first class hard wood of size ( 0.95m x 2.10m) complete all as specified and directed by Engineer- in - Charge .
M&L for 19 mm thick cement fibre board fixed with screws including 2mm thick form and 8mm thick laminated wooden flooring and finish complete all as specified and directed.
M&L for 19 mm thick cement fibre board fixed with screws on walls complete all as specified and directed.
M&L for Glazed ceramic coloured tiles of size 450mmx 350mmx 7mm /350mmx250mmx7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the tile including 10 mm thick cement rendering in cement mortar 1: 4 as on vertical surfaces such as skirting, dados, wall etc complete all as specified.
M&L for Non- skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1: 6 complete.
S&F for wall structure in 3 layers, first layer with german pine wood(kiln dried and processed) studs 38mmx90mm with c/c of 16 inch with top and bottom base plate of wooden studs and filled with rockwool insulation(density of rockwool not less than 48 kg per cum), second layer with 12mm OSB Ply and third layer will be of 1 mm thick APP membrane as moiture barrier. Wall base plate will be fixed with foundation bolt or fastner, under the base plate, 1 layer will be termite barrier and 2nd layer of 1 mm thick APP membrane will be moisture barrier, fixing 18mm thick german pine wood cladding with battan 25mmx25mm and finish with water base PU external grade and internal 12mm thick german pine wood cladding finish with water base PU coated complete all as specified.
S&F for roof structure with german pine wood(kiln dried and processed) 38mmx145mm rafters with c/c 24 inch with support beams, with 12mm wooden cladding with approved colour and water base PU coating, including insulation of rock wool(density not less than 48kg per cum) of 38mm thick and 12mm thick OSB ply with 1 mm thick APP Membrane and top layer will be Asphalt Shingles complete all as specified. (Note for item no 14 and item no 15- Structural wood shall confirm to IS code 3629:1986 and IS code 883:1994 as highest quality for parameters such as Strength and durability, in accordance with procedure laid down in IS 1708:1986.)
S&F for 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls, ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge
S&F for 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls, ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge
S&F for vitreous china EWC Super constellation including cistern of size 83mmx37mmx66cm 'S' trap including necessary floor trap complete Make: Hind ware as per Cat Part No. 20040 (S-10/P-9) or its equivalent in Parry ware/ Cera.
S&F for vitreous china urinals, full stall type (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F for health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed Make: Jaquar Cat part No-563 or its equivalent in Marc / Kohler.
S&F for 15 mm bore bib taps,chromium plated with crutch or butterfly handle,fancy type, long body screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F for 15mm bore dia angle valve,chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and directed.
S&F for wash hand basins, vitreous china of size 550mm x400mm(flat back or angle back type) including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia waste fitting cast copper alloy, chromium plated with long screwed shanks and flynuts flange and beded in red lead cement, PVC waste pipe of suitable length and dia including 15mm bore fancy type CP finish, pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and directed.
S&F for basin mixer with pop up waste system , Hot and Cold, facilites and 450 mm long braided hoses, chromium plated complete all as specified and directed by Engineer-in -Charge. Make : Jaquar Cat part No- DRC-37005 B of make Jaquar or its equivalent in Marc / Kohler.
S&F for tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified.
S&F for PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified.
S&F for toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed in trenches or floor complete all as specified and directed.
S&F for 75 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed in trenches or floor complete all as specified and directed.
S&F for 110 mm bore PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and directed.
S&F for 110 mm bore PVC(SWR) bends any radius complete
S&F for 75 mm bore PVC(SWR) bends any radius complete
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sqmm FRLS (nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and modular metal flush boxes alongwith outer cover plate for mounting modular switch, socket and electronic regulator and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm FRLS (nominal area) for one light point controlled by one switch one way all as specified.
All as per item No 35 above but for one fan/exhaust fan point controlled by one switch complete.
All as per item No 35 above but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable size 1.5 Sq mm PVC insulated stranded sheathed copper conductor.
All as per item No 35 above but for one 3 pin 5 Amp out let point on the same board controlled by one switch complete
All as per item No 35 above but for One 3 pin 5Amps socket out let point on the Independent board controlled by one switch complete
All as per item No 35 above but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 1.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and directed.
S&F for switch of modular single pole one way 6 amp 240 volts, 1 module complete.
S&F for bell push of modular single pole one way 16 amp 240 volts, 1 Module complete.
S&F for switch of modular single pole one way 16 amp 240 volts, 1 Module complete.
S&F for modular socket, 6 amps 2/3 pine, 2 module complete
S&F for modular socket, 6/16 amps 2/3 pine, 2 moduls, complete all as specified and directed by Engr-in-Charge.
S&F for Modular white cover plate with frame, 1 module, complete
S&F for Modular white cover plate with frame, 2 modules complete
S&F for Modular white cover plate with frame, 3 modules complete
S&F for Modular white cover plate with frame, 4 modules complete
S&F for Modular white cover plate with frame 8 modules complete
S&F for Modular metal flush box, but 1/2,3 module, complete
S&F for Modular metal flush box, but 4 module, complete
S&F for Modular metal flush box, but 6 & 8 module complete
S&F for stepped type modular fan regulator 120 watt 02 modul, 230 volts, 50 HZ, AC supply complete.
S&F for electric ding dong bell, 230 volt AC, single pole, complete
S&F for unique slimmest recess com surface panel, solution to provide variable cutout size for installation in recess. LED down lighter 24 Watt complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size .all as specified.
S&F for decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 W LED lamp B27 base complete with connection with and including copper conductor cable of suitable size complete all as specified.
S&F for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified
Material and labour for submain wiring with two single core 4.00 Sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked not less than 20mm dia with all conduit fittings & fixing accessories and one single core 4.00 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified.
S&F for Indoor Elegant and sleek designed LED , 20 Watt PC hosing LED with integrated batten 20 watt 4 feet white fixture complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete .
S&F for exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm ,pre wired with 1.5 sq mm flexible three core copper cable from connector to ceiling rose complete all as specified
S&F for ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified
S&F for Bulk head LED fitting 10 watt with PDC aluminium housing and milky diffuser complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete .
S&F for sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified.
S&F for MCB, TPN, current carrying capacity 40 A, 10 KA 'B' curve, 415Volts complete all as specified
S&F for 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.
S&F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified.
S&F for rigid non metalic PVC conduit (medium grade) ISI marked 20 mm dia inclusive of tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as coupler lock nuts saddles, pipe hook etc for replace damage existing sub main and wiring conduit complete all as specified.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.
S&F for air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 star rated all as specified and directed.
S&F for voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA all as specified.
Excavation in trenches not exceeding 1.50 Mtr wide and not exc. 1.5 Mtr deep and getting out in soft/loose soil for taking out/laying cable, poles & stay etc complete all as specified and as directed.
Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete.
M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm complete.
M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat.
Supply, laying, connecting and testing for LT XLPE insulated screened PVC bedded electric power cable (Heavy duty) 1100 volts grade galvanised steel strip armoured with stranded aluminium conductor 35 Sqmm 3.5 core laid in trenches/ ducts fixed to wall /pole / inside panel drown through pipe all as specified and as directed.
Atish Builders LLP
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .