Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹11.7 L+₹2.6 L (29.0%)Rejected-Finance 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹12.3 L+₹3.3 L (36.7%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹12.7 L+₹3.7 L (40.9%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹12.9 L+₹3.8 L (42.5%)Rejected-Finance H NO 1 7 1 79 1 ROAD NO 7 REDDY ENCLAVE TEMPLE ALWAL SECUNDERABAD 500 010 | HYDERABAD | TELANGANA | 500010 | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | ATUL ENTERPRISES L2 | harshraj and co L1 | NEWS CONSTRUCTIONS L4 | Vara Enterprises L6 | VACON INFRASTRUCTURES L3 | M/s G SATISH REDDY AND CO L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge. | 380 | Sqm | 15 ₹5,700 | 5 ₹1,900 Lowest | 15 ₹5,700 | 20 ₹7,600 | 10 ₹3,800 | 18 ₹6,840 |
| 2.00 | M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in floor finishes to receive tiles and as directed | 100 | Sqm | 75 ₹7,500 | 75 ₹7,500 | 50 ₹5,000 | 90 ₹9,000 | 15 ₹1,500 Lowest | 190 ₹19,000 |
| 3.00 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles all as specified and as directed by Engineer -in-Charge. | 100 | Sqm | 600 ₹60,000 | 560 ₹56,000 Lowest | 750 ₹75,000 | 760 ₹76,000 | 800 ₹80,000 | 650 ₹65,000 |
| 4.00 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge. | 80 | Sqm | 600 ₹48,000 | 560 ₹44,800 Lowest | 775 ₹62,000 | 780 ₹62,400 | 800 ₹64,000 | 650 ₹52,000 |
| 5.00 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge. | 50 | Sqm | 600 ₹30,000 | 560 ₹28,000 Lowest | 800 ₹40,000 | 800 ₹40,000 | 800 ₹40,000 | 900 ₹45,000 |
| 6.00 | M&L for coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified as directed by Engineer -in-Charge. | 100 | Sqm | 600 ₹60,000 Lowest | 650 ₹65,000 | 800 ₹80,000 | 790 ₹79,000 | 800 ₹80,000 | 700 ₹70,000 |
| 7.00 | M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed | 230 | Sqm | 100 ₹23,000 | 50 ₹11,500 | 85 ₹19,550 | 90 ₹20,700 | 10 ₹2,300 Lowest | 99 ₹22,770 |
| 8.00 | M&L for rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc and as directed | 120 | Sqm | 200 ₹24,000 | 85 ₹10,200 | 100 ₹12,000 | 100 ₹12,000 | 10 ₹1,200 Lowest | 180 ₹21,600 |
| 9.00 | M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)as in sub base and as directed | 150 | Sqm | 150 ₹22,500 | 110 ₹16,500 | 100 ₹15,000 | 160 ₹24,000 | 75 ₹11,250 Lowest | 120 ₹18,000 |
| 10.00 | M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed | 50 | Sqm | 150 ₹7,500 | 85 ₹4,250 | 50 ₹2,500 Lowest | 95 ₹4,750 | 75 ₹3,750 | 99 ₹4,950 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MCEME SECUNDERABAD
GARRISON ENGINEER MCEME, MCEME CAMPUS, TRIMULGHERRY (POST) SECUNDERABAD - 500015
COMPREHENSIVE REPAIR WORKS TO TRISHUL LINE OR MD ACCN IN ZONE I AREA UNDER GE MCEME SECUNDARABAD
2025_MES_709484_1
8688/E8
Open Tender
Civil Works
Item Rate
180 days
SECUNDERABAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MCEME SECUNDERABAD
₹40,000
Yes
12 Aug 2025
21 May 2025
19 Jun 2025
21 May 2025
17 Jun 2025
4 Jun 2025
Amount
Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.
M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in floor finishes to receive tiles and as directed
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles all as specified and as directed by Engineer -in-Charge.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.
M&L for coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified as directed by Engineer -in-Charge.
M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed
M&L for rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc and as directed
M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)as in sub base and as directed
M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed
M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments and as directed
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) and as directed
M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required and as directed
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment and as directed
M&L screed bed or bedding layer of mortar 15mm thick in cm 1:4 for laying floor finishes all as specified and as directed.
Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc all as specified and as directed.
M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for pillars and etc all as specified and directed by Engineer in charge.
Taking down chowkhats of frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm and as directed
Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc 4 sqm and as directed
Taking down Shutters of any description exc 02 sq.m each complete all as specified.
Taking down Shutters and Resecuring or easing & adjusting, and fixing the same opening of any description exc 1 sq. m and n exc 2 sq. m each and as directed
M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing.and as directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.
M & L 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded on chamfered put together with glue pinned at joints and as directed
S&F 125x60mm pressed steel frames for door with one or more rebates including necessary fixing lugs,hinges ,lock ,strike plate etc and as directed
S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge
S&F 35 mm thick IInd class hard wood Glazed and skeleton shutters, for door open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR Part-I, Sec-8, Clause 8.24 a and fixed to chowkhats complete all as specified and directed.
S&F butt hinges medium weight, cold rolled mild steel 100mm long. and as directed
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and as directed
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and as directed
S&F aluminium handles 150mm long fabricated type anodised all as directed
S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate fixing to door frame with welding or any means complete all as specifid and directed by Engineer in charge.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed and as directed
M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed.
S&F steel windows /ventilator with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded and ht up to 12.0 m all as specified and directed by Engineer in charge
S&F in repair prepainted steel windows/ventilators ( ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws , complete all as specified and directed by Engineer-in-Charge. (Make : NCL/TATA/Equivalent)
Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc and as directed
M&L for rendering 15 mm thick in concrete surfaces of walls set in CM 1:6 finished even smooth without using extra cement complete all as specified
M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m) and as directed
Supplying only Integral waterproofing compound
M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed
M&L for preparation of two coat of cement base paint over a coat of alkali resistant primer on newely plastered surfaces of walls complete all as directed
S&F in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge
S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engr-in-Charge
S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) including 'P' or 'S' Trap with necessary, fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed.
S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repairs vitreous china Orissa pattern squatting pan 580 x 440mm with integeral foot rests including P or S trap, complete all as specified and directed by Engineer-in-Charge.
S&F in repair Wash basin vitruous china 550 X 440mm long white colour flat back incuding and MS brackets, complete all as specified and directed by Engineer-in-Charge.
S & F 75 mm dia PVC (SWR & RWP) floor trap plain with grating inclu. jointing with solvent cement of out let dia and as directed
S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and as directed
S&F in repair PVC waste pipe, 40mm dia for sink etc, complete all as specified and as directed by Engr-in-Charge.
S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.
S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (ht up to 15 m) and as directed
S&F plain sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows complete all as specified and directed by Engineer-in-Charge.
All as per Sl Item No. 57 above but 3.00 mm thick figured glas sand as directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L 100 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) hard standing finished even and smooth without using extra cement. With spike rolling to to surface or maing impressed of expanded metal.and as directed
Dismantling of 1000 ltr water storage tanks and removed to store complete all as specified.
S & F 1000 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.
Dismantling of 500 ltr water storage tanks and removed to store complete all as specified.
S & F 500 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.
Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.
Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.
Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S & F mild steel articles such as hold fasts conforming to IS-2062 and grade E-165 (Fe-290), including riveting/or welding and fixing with screws, bolts, etc. complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.
S&F in rep SS soap dish, any type, fixed to plugs with chromium plated brass screws, etc complete all as specified and as directed by Engineer-in-Charge.
S&F CP brass tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified
S&F PVC (SWR) 100/110mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps including taking down old pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.
S&F PVC (SWR) bend/shoe for 100/110mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.
S&F PVC (SWR) 75mm dia single socketed pipe including jointing with solvent cement including taking down old pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.
S & F for PVC (SWR) 75 mm bends complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints , any size including fixing to steel pipe or union, etc complete all as specificed and as per directed by Engineer-in-Charge.
S&F Stainless steel sink in repairs single bowl made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling CP brass , washers waste pipe, cast iron cantilever brackets, connecting union overall size 495 mm X 420 mm with bowl size 410mm X 330mm X 160mm complete all as specified
Demolition of Concrete in sunken floors and pavings exc 15 cm thickness (below or above ground level) otherwise specifically provided complete all as directed by Engineer in charge
M& L Rendering15 mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even and smooth without using extra cement . Note WPC shall be measured & paid separately
M&L for providing and applying brush applied water based PU dispersed polymer modified Elastomeric liquid membrane, ShaliUrethane BTD with Zero VOC or of any approved make-STP/Fosroc/BASF to form the membrane in situ at site with 3 layers of monolithic, seamless finish having >500% elongation. The first layer is to be formed mixing with clean water in the ratio of 1:1 @ 400 Gms per Sqm and shall act as the prime coat to fill in the cavities. This can be brush or roller applied. For spray application, using any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure. Providing and applying the second coat @ 1 kg per Sqm using the soft brush, roller or spray system with the recommended nozzle size on to the primed surface. Providing and applying 50 Gsm fiber cloth over the 1st coat, when substrate till the coat is tacky. Providing and applying 3rd coat @ 1kg/Sqm to finish the application for a thickness of 1.5mm membrane formed in place. The second coat should be applied perpendicular to the first coat for cross linkage and complete as per the specification and all as directed.
M& L for 25mm thick PCC 1:2:4 type BI using 20 mm graded stone aggregate as in foundation,filling in sunken portions and mass concrete complete all as specified and directed by Engineer in charge
M&L for PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in filling and mass concrete as in sunken floors compete all as spefified and as directed please.
ATUL ENTERPRISES (BID ID -3318163)
VACON INFRASTRUCTURES (BID ID -3318875)
NEWS CONSTRUCTIONS (BID ID -3319001)
M/s G SATISH REDDY AND CO (BID ID -3326573)
Vara Enterprises (BID ID -3326762)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .