Renovation of Ziledar Office, Staff Quarter and Boundary Wall of Irrigation colony Shankargarh, Prayagraj.

Amount

Dismantling brick work, stone work in lime or cement mortar including stacking of materials as directed by engineer-in-charge within a distance of 60m.

Providing and laying DPC 25 mm thick in CC 1:1.5:3 (1cement, 1.5 approved coarse sand and 3 parts aprovedl0 mm graded stone grit) in plinth level of boundry wall including cost of material, labour, T&P and water proofing material etc.

Brick Masonry in 1:4 cement moter on 1st class 150 brick. Including all type of Labour , T&P and with all materials etc for proper completion of work. As per direction of engineer in -charge.

10mm/12mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering in single storey building finished even smooth including all cost of material ,labour, T&P etc. required for proper completion of work as per direct

Painting of boundry wall.

Dismantling reinforced cement concrete 1:2:4 Including Slacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Dismantling stone work in lime or cement mortar including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Dismantling door or window including chaukhat with holdfost including stacking of materials as directed by Engineer-in-charge within a distance of 60m.

Dismantling cement concrete or brick or granolithic floor including base concrete including stacking of dismantled materials within a distance of 60 M. as directed by the Engineer-in-charge.

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 6OM.

Stone masonry in Cement mortar (1:3).

Earth work in foundation

P.C.C. in foundation 1:4:8

Brick masonry in Cement mortar (1:4).

Centering & Shuttering for R.C.C work in slab of building work.

R.C.C. work 1:1.5:3 excluding reinforcement, Centering, Shuttering & staging.

Cutting. bending. bindng and placing in position of reinforcement including cost of 18 gauge black binding wire & including cost of reinforcement steel.

S/F pressed steel Chaukhat made of M.S. Sheet 18 gauge (1.25 mm.) including iron hinges of 100 X 3 MM. I.S.I. Mark drilling holes of L- drop, tower bolt and 230 x 40 X 6 mm. flat iron hold fast including supply of all materials, labor, T&P ,carriage up to

Supply and Fixing of 4.5 cm thick seasoned wood fully panelled door and window Shuliters including supply and lixing of wooden cleats and stops and including fixing & adjustment or hinges, bolts, lacks handles springs and/or other fittings but excluding p

Cement plastering 12mm thick (1:3) on stone masonry . Rate are for 3m. height, lead up to 60M.

Cement pointing 1:3 (deep stuck) on stone masonry . Rate are for 3m. height, lead up to 60M.

Cement plastering 12mm thick (1:4) on brick masonry . Rate are for 3m. height, lead up to 60M.

Providing and laying chiken mess in roof floor to prevent leakase including cost of matrial ,labour and T&P and water proofing material etc.

Plain Cement Concrete (PCC) flooring in the proportion of 1:4:8 including supply of all materials, labour and Tools & Plants etc required for proper completion of the work Excluding GST .

Flooring for floor 2.5 cm (1") thick in the building including cost of glass strip, Material and Labour T&P etc.

P/laying 300x300x8 mm Kajaria/ Somany tiles flooring over 20 mm. (arv.) thick base of cement mortar 1:4 (1 cement :4coarse sand) raid and jointed white colour cement (with pigment) slurry including cost of all material, labour, T&P rubbing and polishing

P/Laying 300x450x6 mm, china white glazed or colour tiles in wall laid With 1:3 cement & coarse sand mortar finished with white cement slurry, jointing & polishing complete, including supply of all material, labour, T&P etc. required for proper completion

Flooring for Apron around the building including cost of glass strip.Material and Labour T&P etc.

Finishing wall with white coloured two coat approved make of or Birla / J.K. wall putty including cost of all material, labour, T&P required for proper completion of work

Distempering approved brand (two coats) over one priming coat of whiting on new surface after thoroughly brushing the surface free from dropping and other foreign matter including preparing the surface even and sand papered smooth.

Finishing walls in two coat of water proofing cement paint of premium quality such as super snowcem, Durocem, Supercem of required shade on new wall surface over one coat of white cement primer to give an even shade including curing and cost of all materi

Fabrication and fixing of mild steel / iron work in grill, including cutting. drilling, welding rewetting and fixing hings where necessary with fixing of position including cost of all material, labour, T&P etc. required for proper completion of work wit

Painting two coat of wooden primer and two coat paint on new wooden surface including thoroughly cleaning of dirt & other foreign matter and sand papering & making smooth surface.

Painting two coat of Synthetic enamel paint on new surface (excluding cost of primer) superior quality such as luxol, higloss, apcolite, superiarc. dulux, including cost of all material, labour T&P etc. required for proper completion of work.

Wiring point for light with 1.5 Sq.mm. PVC insulated multisrand copper conductor cable or earth wire drawn inside the conduit. pipe concealed in the wall complete with 8 SWG.I. earth continuity wire and piano type switch etc. complete in all-respect

Wiring point for plug with 1.50 sq mm, PVC insulated multisrand copper conductor cable or earth wire drawn inside the conduit. Conduit concealed in the wall

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit pipe earth continuity wire and piano type switch etc. complete in all respects.

Wire point for HPMV lamp with 2.5 mm 2 PVC/C/V lR insulated single core cable in heavy gauge rigid steel conduit conduit. concealed in the wall ccomplete with 8 SWG G.I. earth continuity wire with 15 A piano type switch etc. complete in all respect.

S/F Isolator (63A , 220V) Make type Hazells or any approved brand including with electrician and labor charges

S/F M.C.B (16A, 220V) Make type Hazells or any approved brand including with electrician and labor charges

S/Fixing 100 mm size 'P'or 'S' trap for water Closet squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 cement: 1 one sand)

P/F Indian (Orissa pan) type white glazed earthen ware 1st quality ISI marked W/C pan size 580 Indian make of approved quality including cost of all materials,

P/ Fixing 10 Its. Low revel P.V.C cistern of standard approved make complete with all accessories and fittings.

P/F mirror of size 900mmx45mm of approved make with teak wood frame and 6 mm thick hard board baking including cost of all material, labor T&P etc,

P/Fixing wash basin 550x400 with Pedestal and holes for pillar Cock with C.I.M.S. brackets painted white including cutting hole & making good the same.

P/Fixing stainless steel kitchen sink 10x310x200 with J. Bracket excluding cost of other fittings.

P/F PVC over head tank 0.5KL Tank capacity in any approved brand such as sintex including all cost of material and manpower.

P/Fixing concealed CPVC 15 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material.

P/Fixing concealed CPVC 25 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material.

15mm dia stainless steel bib cock /No.

P/F 15mm dia stainless steel pillar cock ISI marked including cost of all material.

P/F l5mm dia PVC union ISI marked including cost of all material.

P/F 25mm dia PVC union ISI marked including cost of all material.

P/F 15mm dia albow ISI marked including cost of all material.

P/F 25mm dia albow ISI marked including cost of all material.

P/F 15mm dia socket ISI marked including cost of all material.

P/F 25 mm dia socket ISI marked including cost of all material.

P/F dia Reducing T fitting including cost of all material.

P/F 25 mm dia T fitting ISI marked including cost of all material.

P/F 15 mm dia angle cock ISI marked including cost of all material.

P/F nahani trap with jali including cost of all material.

P/F 25mm float valve in over head tank including cost of all material.

P/F water Shower with isi mark including cost of all material.

Dry earth work in excavation of foundation in ordinary soil/sandy loam. clay or sand including lift upon 1.5 meter and lead up to 30 meter including filling, watering. ramming, of excavated earth into the trenches or up to tile space and sides of the foun

Cement concrete (1:3:6) in foundation. floor and concrete blocks. Up to 3 meters lift and lead up to 6OM with mechanical mixing.

1st class Brick work in (1:4) cement mortar .Rate are for 3m. height. lead up to 60M. including cost of materials.

1 Cum 1st class brick work masonry in 1:6 CM one part of cement, 6 part of coarse sand FM > 2.00 including cost of all material labor and T&P etc.

1st class Brick work in dry masonry .Rate are for 3m. height. lead up to 60M. including cost of materials.

Cutting. bending. hinding and placing in positon of reinforcement including cost of binding wire & including cost of reinforcement steel.

Precast R.C.C. work 1:1.5:3 excludiing reinfcrcement, Centerinng & Shuttering.

Cement plastering (1:3) on Brick masonry with neat cement slurry. Rate are for 3m. height, lead upto 60M including cast of materials.

40-80 mm size brick aggregate in filling.

Local Sand filling outer of the Soak pit

S/F l00mm PVC Pipe (approved brand) including with cost of pipe and all material.

Transportation of Rig Machine And its T & P with Loading Unloading and manual sifting of clamp and eqipapages at site and return back after completion of work

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (i) 0 to 10 m

(ii) 11 to 20 m

(iii) 21 to 30 m

(iv) 31 to 40 m

Supply and lowering of l50mm dia PVC casing pipe with ISI mark incluiding all cost of material and Labour etc.

Supply and lowering of l50mm dia PVC casing slotted pipe with ISI mark incluiding all cost of material and Labour etc.

Supply stone grid (4.75 mm to 10mm) including filling surrounding in bore well.

Dovelopment of bore by air compressore.

Supply and installation 32 mm dia PVC column pipe 10 Kg/cm2

Supply and installation of 1 HP water filled submersible Pump set Approved make complete with starter panel etc.

Supply and fixing of 32 mm dia 1 pair Iron Clamp

Supply and fixing of Submersible Cable 2.00 sq mm Finolex make

Supply and fixing of 32 mm dia pvc Elbow

Supply and fixing of 32 mm dai cpvc Nipple

Supply and fixing 100 mm dia steel bore end cap

Supply and fixing 100 mm dia steel Bore Cap

Supply and fixing of 32 mm dia cpvc Gate valve

Supply and fixing of Nilon mesh and dori

Supply and fixing of high tensile steel Supporting wire for submersible pump

Earth work in filling in embankment of canal including cost of all materials, labour, T&P, lead and lift required for proper completion of work.

Dismantling and relaying of brick pitching in shouider of road including cost of all materials, labour, T&P, lead and lift required for proper completion of work.

WBM Grading - III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 80-100 Kn in stages to proper

Prime Coat (Slow Setting)- Providing and applying prime coat with bitumen emulsion of specified grade on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70Kg/sqm as per MORD specification.

Tack Coat- Providing and applying tack coat with bitumen (VG-10) using emulsion distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular base surface cleaned with mechanical broom as per MORD specification.

20mm thick Open-Graded Premix Carpet using Bituminous - Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of speicified size aggregates either using penetration grade bitumen or cut-back or emulsion to serve as w

Seal Coat - Providing, and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type C seal coat (As per MORD Specified Clause 510)

Interlocking - Laying 60mm & 80 mm thick interlocking payer blocks with preparation of sub base including filling joints with sand.

Supply & Installation of Solar panel 160 Watt x 4, I80AH battery, Model 1435 Inverter and Light.

m/s satish chandra jaiswal