C/o Govt. Senior Secondary School Building at Mahasu in Tehsil Kotkhai, Distt. Shimla, H.P.

Amount

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling to any floor height and removal of the same for in situ-reinforced concrete and plain concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

In flat surfaces such as soffits of suspended floors, roofs, landings and the like of any thickness in all floor level in all heights.

Columns,pillars,posts and struts Square,rectangular or polygonal in plan in all floor level in all heights.

Beams, Cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in all floor level in all heights.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

In suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level.

In columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.

Providing Tor / TMT steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and laying brick work using common burnt clay building brick in Cement Mortar 1:6 (One cement:Second sand) Second class bricks in super structure for all floors and heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and laying second class half brick masonry in common burnt clay building bricks in cement Mortar 1:4 (One cement: Four sand) in super structure for all floor in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters. 40 mm thick including black enamelled M.S. butt hinges as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.through all modes of transportations with in all leads and lifts and as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge . 250×16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing aluminium tower bolts(berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete complete.through all modes of transportations with in all leads and lifts and as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge . 150x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. complete complete.through all modes of transportations with in all leads and lifts and as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge .100 mm

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixingas per the entire satisfaction of the Engineer-in-Charge includingcarriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete per the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete per the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete 1st class Indian teak wood. per the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing finished Magnet Catcher with Screw etc complete as complete per the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing and laying mirror polished Kota stone slab of uniform colour of size 55x55cm in flooring over 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete :-25 mm thick mirror polished slab size not less than 550mmx550mm including carriage of materials within all leads and lifts.

Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

In trusses and trussed purlins in buildings.

In gratings framed guard bars,ladders,railling,brackets and similar works.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely Complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting Complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping Complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge With enamel paint other than white

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing valley 90 cm overall 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing & fixing M.S. B.P. sheet 2mm ( Two milimetre ) thick in eaves board/facia/ soffits/ ceiling including cutting fixing & welding to steel roof mambers and applying a coat of red lead primer complete ( Base member of steel work shall be measured & paid for separately ) as per HP.PWD., specification Volume-I ( one ) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 150mm dia pipes through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

PVC Plain bend 150mm dia

PVC shoe 150mm dia

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge washers etc. including making necessary conections with rain water pipe complete as per design. 0.63 mm thick sheet

Providing and fixing angle iron door,window,clerestory window frame manufactured from M.S.Angle iron section of 50X50X6 mm ,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-inCharge.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as directed by Engineer-in- Charge.

Steel windows

Side hung windows

6mm ( six milimetre ) cement plaster to ceiling with cement mortar 1:3 ( One cement : three approved sand )as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm ( fifteen milimetre ) cement plaster in single coat on rough side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in cement mortar 1:6 ( One cement : six approved sand) as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm ( fifteen milimetre ) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. cement mortar 1:6 ( One cement : six approved sand)

Finishing wall with weather proof exterior grade emulsion of approved shade and design (Apexultima) or its equarlied on undecorated wall surfaces two coats to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Wall painting (two coats) with arcylic /premium emulsion paint of approved brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Applying Birla white wall care putty ovee plaster surface thoroughly brushing the surface free from mortar droppings and other foreign matters , sand papering the surface smooth complete. through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work andlaying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Gradedstone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design. through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground complete as per standard design. through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including finishing the top surface of concrete smooth complete as per standard design. through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Dinesh Chandel

M/s Pardeep Sublaik

AKSHIT THAKUR

Pankaj Chauhan

Naresh Kumar