KDL/Elect Plant/ DG and CCTV UPS Supply /26-27/52

N.M.D.C. LIMITED

(A Government of India Enterprise)

BAILADILA IRON ORE MINE, KIRANDUL COMPLEX

Name of the Work : "Separate DG Supply & CCTV UPS Supply distribution, Spare cable removing & Painting works at SP-1"

Ten. Enq. No.: KDL/Elect. Plant./ DG& CCTV UPS Supply /26-27/52

MSTC ET. No.:NMDC/Kirandul/Contract/36/26-27/ET/455[DG AND CCTV UPS SUPPLY]

Name of The Bidder:

Earthging arrangements (Group-A)

Sl.no Name of the works Unit Qty Rate Total Amount in Rs.

1.1 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. Mtrs 4000

1.2 Earthing with GI earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc. with charcoal/coke and salt as required. Each 30

2 Lighting Conductors (Group-B)

2.1 Providing and fixing G.I tape 20 mm x 3 mm thick on papapet or surface of wall for lighting conductor complete as required (For vertical run) Metre 1200

2.2 Providing and fixing of lighting conductor finial,made of 25 mm dia 300 mm long, G.I tube , having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 12

3 Plant Electrification through DG Set & CCTV through UPS Supply (Group-C)

3.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required (clamped with 1mm thick saddle)upto 35 sqmm Mtrs 17500

3.2 Supply and fixing of 8 way(4+24) , double door, horizontal type three pole and neutral,heet steel, MCB Distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnection, powder painted including earthing etc. as required (without MCB/RCCB/Isolator) Each 24

3.3 Providing and fixing 100 Amp TP&N disconnector fuse switch unit inside and existing panel board with ISI markes HRC fuses including drilling holes in cubicle panel,making connections, as required. Each 5

3.4 Supply and fixing of 12 way (4+36) ,surface/recess mounting,vertical type,415 Volt,TPN MCB distribution board of sheet steel,dust protected ,duly powder painted,inclusive of 200A tinned copper bus bar,common neutral link,earth bar,din bar for mounting MCBs(but with out MCBs and incomer)as required. Each 18

3.5 Supplying and fixing 5 Amp to 32 Amp rating, 240/415 V,10 kA, "C" curve ,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection ,testing and commissioning etc as required.

3.5.1 Single pole Each 120

3.5.2 Triple pole and neutral Each 58

3.6 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C Point 100

3.7 Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 Nos. 4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. Meter 500

3.8 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

3.8.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 500

3.8.2 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 500

3.9 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

3.9.1 5/6 A switch Each 50

3.9.2 2 way 5/6 A switch Each 50

3.9.3 15/16 A switch Each 50

3.8 Installation, Testing and Commissioning of pre-wired LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall/bracket , including connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 200

Installation/Dismantling of Electrical/Electronics Equipments (Group-D)

4.1 Dismantaling of Panels/shifting of DG set/LT Capacitor panel/spare lighting transformer/metal detector. The work includes Cutting, lifting, rigging and shifting of old HT Panels to CST Kirandul/required location of site as per Engineer In Charge. LS 1

4.1.1 Dismantaling of Pump House HT panel. The work includes Cutting, lifting, rigging and shifting of old HT Panels to CST Kirandul/required location of site as per Engineer In Charge.

4.1.2 Shifting of DG set. The work includes lifting, rigging and shift of DG set to required location of site as per Engineer In Charge

4.1.3 Shifting of LT Capacitor panel. The work includes Cutting, lifting, rigging and shifting of Existing LT Capacitor panel to required location of site as per Engineer In Charge.

4.1.4 Shifting of Metal Detectors. The work includes lifting, rigging and shift of Metal Detector to required location of site as per Engineer In Charge

4.1.5 Shifting of Spare Lighting Transformer. The work includes lifting, rigging and shift of Lighting Trasformer to required location of site as per Engineer In Charge

4.2 Dismantling the existing armoured / unarmoured power/control(multi-core) cable from SP-1 Sizes up to 35 sqmm. and shifting to CSD Kirandul at the site as per Engineer In Charge. Mtrs 5000

4.3 Removal/dismantling the existing armoured / unarmoured power/control(multi-core) cable from SP-1 Sizes up to 95 sqmm. and shifting to CSD Kirandul at the site as per Engineer In Charge. Mtrs 5000

Painting Works (Group-E)

5.1 Painting with synthetic enamel paint in different colours as per instruction of Engg. in-charge with approved brand and manufacturer.New work(two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Paint should be of approved brand (as mentioned in the list of prefered makes) to give an even shade on GS sheet (two coats of paint and one coat of steel primer), after cleaning the surfaces on both sides. sqm 1223.54

5.2 Lettering with Synthetic enamel in different colours (as per instruction of Engg. in-Charge.) per letter per cm 25000