Construction of PME SEWA Funded Electric Bus Depot at Mudipu Mangaluru

Construction of PME SEWA Funded Electric Bus Depot at Mudipu Mangaluru

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, ca...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height. ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height. ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granit...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height. ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite t...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mo...

Providing 12mm cement plaster on the rough side of single or half brick wall of mix 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removi...

Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...

Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer , with water absorption less than 0.08 percentage and conforming to I.S. 15622, of approved make, in ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle gre...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c c and cross battons 38mmx50mm at 600mm c c sawn and putup including cost of materia...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Suspen...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprisin...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring ...

Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Ela...

Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions ...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g m2 bot...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitt...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr 10 m² over and including priming coat of exterior primer applied at 2.20 kg 10 m² with...

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...

Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour , 600 mm long towel rail with...

Providing and placing on terrace at all floor levels polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing Chorinated Poly Venyl Chloride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

Providing and fixing Chorinated Poly Venyl Chloride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

Providing and fixing Chorinated Poly Venyl Chloride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary, including t...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...

Supplying SandS RCC SPUN VIBRATED CAST PIPES REINFORCED pipes NP 3 Class conforming to IS:458 1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Supply and delivery at site GM copper alloy gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed...

Supply and delivery at site GM copper alloy gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed...

Supply and delivery at site GM copper alloy gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed...

Providing and fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs weight of cover 23 kgs and weight of frame 15 kgs and necessary locking arrangements with M.S flats 32x6 mm etc ...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick Rcc stone walls and coloumns beams with necessary aluminium frame works at required level made...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mo...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mo...

Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and remov...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mo...

Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c c and cross battons 38mmx50mm at 600mm c c sawn and putup including cost of materia...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Susp...

Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprisin...

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic ...

Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and le...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions ...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle gre...

Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer , with water absorption less than 0.08 percentage and conforming to I.S. 15622, of approved make, in ...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr 10 m² over and including priming coat of exterior primer applied at 2.20 kg 10 m² with...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps SRP Vol 2 124 14.7.1 FF

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings a...

Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...

Providing and fixing 100 mm sand cast Iron grating for gully trap FF

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the...

Supply and delivery at site GM copper alloy gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screw...

Supply and delivery at site GM copper alloy gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screw...

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitt...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick Rcc stone walls and coloumns beams with necessary aluminium frame works at required level ma...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, inc CSR 2023 24 Vol 2 23 7.18 ...

WORK SHOP :Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge

Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer in charge, area of grill to be measured including cost of m...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer in charge 0.50 mm + 0.05 percentage total coated thickness with zinc co...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 percentage total coated thickness, Zinc coating 120 g m2 as per IS: 277, in 240 mpa steel grade, 5 7 microns ...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 percentage total coated thickness, Zinc coating 120 g m2 as per IS: 277, in 240 mpa steel grade, 5 7 microns ...

Construction of Granular Sub Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and c...

Construction of M40 Grade un reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximu...

Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4 8 hours of casting of bay slab etc. complete in...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...

Providing and laying water proofing treatment to the Roof with PU base single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of C:Bathroom, cold applied P...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering and leveling the ground without blasting for all works other than foundation in Ordinary Soft rock and depth not exceeding 300mm ...

Earth work in surface excavation by mechanical means for lowering and leveling the ground without blasting for all works other than foundation in Ordinary Soft rock and depth not exceeding 300mm ...

Earth work in surface excavation by mechanical means for lowering and leveling the ground without blasting for all works other than foundation in Ordinary Soft rock and depth not exceeding 300mm ...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Construction of dry lean cement concrete Sub base over a prepared sub grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ...

Vaccum de watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade ...

Providing and laying Reinforced Cement Concrete pipe light dutyNP2 for culverts, roadway utilities and crossingsas per IS 458:2003in Single row including pointing ends and fixing collars withcement m...

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...

Providing and fixing in position 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 600 mm. Long and at 300 mm. C C and wherever directed including handling, straightening, ...

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight

Providing and applying Non metallic floor hardner of approved quality to give more compressie strength to concrete at 2.5 kg Sqm including cost of all materials labour including all lead and lift and ...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tyin...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1...

Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Watch and ward :Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, i...

Storm water drain :Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.5...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height...

Sump tank Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3....

Providing 20 mm cement plaster of mix :1:4 1 cement: 4 fine sand tobrick stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

ETP Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite trap basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Cod...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of ap...

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes of 150mm dia conforming to IS : 13592 Type A, including jointingwith seal ring conforming to IS : 5382, leaving 10 mm gap for ...

Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 1 cement : 4coarse sand C.I. cover with frame light duty 455x610 mm internaldim...

laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 53 mm size metal

laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 40 mm size metal

laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 20 mm size metal

laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge6 mm size grit

Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied at 0.90L 10 m² over an under coat of primer appliedat0.75 L 10 m² of approved brand and manufacture to give an e...

C.I. cover and frame 300x300 mm inside

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, coll...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, coll...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, coll...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, coll...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments, electrical resistance welded steel tubes, ...

Providing and fixing MS casing collars as per IS 1239 part II 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum . The dimens...

Providing and laying at site of work MS casing caps as per IS 1239 part II 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum ...

Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes, for cold water supply including all uPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one...

Supply and delivery at site 50mm 2 dia heavy duty unplasticized PVC Column pipes with heavy duty collarsrubber profile ringvibration control profile ringfreezing and turbulence free leak proof EPDM ...

Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes for cold water supply including all uPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one ...

Supply and delivery at site GM copper alloy gate valves confirming to Class I as per IS 778 with latest amendments 1 No. screwed in bonnet inside screw rising spring spindle integral seat screwed f...

Providing and laying 80mm thick factory made precast M 30 grade Cement Concrete Paver Block as per IRC SP 63:2018 and IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA and for Re...

Building Wiring Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral ...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm ...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm ...

Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc., and run...

25mm dia 2mm thick

Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...

Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine N...

Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine N...

Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine N...

Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine N...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Part

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 16Amps universal socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV Telephone socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45 I.O.outlet Cat 6 Part

Supplying PVC GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...

Supplying and drawing UTP CAT 6E LAN cable

24 port 10 100 Switch

16 port 10 100 Switch

8 port 10 100 Switch

Supplying and Fixing of Patch panel for LAN cabling 24 Port 10 100 1000 patch panel

Supplying and Fixing of …mtrs Cat6 Patch Cable. 1mtr

Supplying PVC GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...

Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws

Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI 80. Power Input: 220 240...

Do LED light fitting 1 x 4 36 40 W

Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1, 200 275V voltage with electronic Driver, PF0.9, sh...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast extruded luminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

Do LED modular down light 1x4 34 36W

Supply of round square recess surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mmains connector and...

Do LED square or round down light 10 12W

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double b...

Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Fixing all types and all capacities fluorescent CFL false ceiling fixtures indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires, required nos of round ...

Supplying and fixing miniature circuit breaker son existing MCB distribution boards using necessary fixing materials andC Type curve,indicator ON OFF,energy cross 3 with Short circuit breaking capac...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase 3 p...

Do 8Way SP andN

Do 12Way SP andN

Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Do 200Amps 36kA

Supplying of on load change over switches 4 poles, AC 23A Duty, 415V, 50Hz, AC Supply. With all accessories. Open Execution . 200 Amps

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz 12 24V

Supplying, fixing and wiring 50 5 to 400 5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound

Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reduce...

Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Do 600x600x3mm Copper plate

Supplying and running Copper conductor for grounding and along with other wires in conduit system of wiring using necessary suitable size clamps, nails, guttas spacers etc., 8 SWG Copper Wire

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average...

Do 25 Sqmm, 3.5 Core, 10 GI Strips 4 x 0.8 mm

Do 3.5 core 50 sqmm

Do 3.5 core 70 sqmm

Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.Tar Road

Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Do 35 to 95 Sqmm

Supply and laying double walled corrugated DWC HDPE Pipe including all necessary connectingSockets Couplings Tees Bends End caps of same materials in existing trench as per IS 14930 part II su...

Supply and laying double walled corrugated DWC HDPE Pipe including all necessary connectingSockets Couplings Tees Bends End caps of same materials in existing trench as per IS 14930 part II su...

Supply and laying double walled corrugated DWC HDPE Pipe including all necessary connecting Sockets Couplings Tees Bends End caps of same materials in exisiting trench as per IS 14930 part ...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Distribution Transformer 3 Phase,11kV 433V Stacked CRGO Core with Oil as per IS 1180 Part 1 : 2014 B. CABLE ENTRY TYPE 63 kVA, Aluminium Wdg, Star 2 5 Star

LT Distribution Box for 100 250 kVA DTC with MCCBs SMC 18.03 pg 9 ESCOM

Double Pole TC Set for erection of Transformer on RCC PSCC 9 Mtr Long Poles as per IS 1977For 100 300 kVA 4 5 Star Rated Transformer on PSCC Pole 9 Mtr Long, 300 Kg WL MS Dwg No. GM QS andS 6...

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC 145 Kg WL PSCC 300 Kg WL Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting Transformer...

RCC Pole 9 Mtr Long, 145 Kg WL Dwg No. GM QS andS 02 Dtd 24.11.2018 as per IS 785 1.01 pg 3 ESCOM

11 kV, Horizontal Cross Arm Galvanised Iron GI

280020 2.02 pg 3 ESCOM

11 kV, Special 3 Pin Cross Arm GI 2.04 pg 3 ESCOM

Spiral Earth Electrode 2.16 pg 3 ESCOM

11 kV Ceramic Pin Insulator Shell only 6.01 pg 5 ESCOM

No. 8 Strain Insulator 6.07 pg 5 ESCOM

No. 15 Strain Insulator 6.08 pg 5 ESCOM

DISC Insulator 45 kN Porcelain 6.09 pg 5 ESCOM

Rabbit ACSR 6 3.35 mm Al + 1 3.35 mm St , Std Wt: 214 Kg KM 7.02 pg 5 ESCOM

10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR 19.02 pg 5 ESCOm

11 kV, HG Fuse Unit with Solid Core Insulator Dwg No. GM QS andS 21 Dtd 24.11.2018 20.01 pg 5 ESCOm

11 kV, 200 Amps Single Break GOS Dwg No. GM QS andS

11 kV, DOLO Cutout REC Specification Dwg No. GM QS andS

DP Set 2 Pole Strucrure Kit For RCC Pole 9 Mtr Long, 145KG WL PSCC Pole 9 Mtr Long, 300Kg WL GI 26.02 pg 12 ESCOm

H Frame Set for fixing 11 kV, 200 Amps Single Break GOS For DP structure for providing New GOS for sectionalisation GI 24.07 pg 11 ESCOm

Refilling available earth around trenches pipelines, cables in layers notexceeding 20 cms in depth, ompacting each deposited layer by ramming afterwatering with a lead upto 50 m, and lift upto 1.5 m. ...

illumination LED Street light : .Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diff...

Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1, 200 275V voltage with electronic Driver, PF0.9, sh...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reduce...

Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strips

Do 600x600x3mm Copper plate

Supplying and running Copper conductor for grounding and along with other wires in conduit system of wiring using necessary suitable size clamps, nails, guttas spacers etc., 8 SWG Copper Wire

Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Supplying and fixing 32mm dia class A GI pipe bracket upto 2.7 meters long for fixing MV SV MH FTL street light fitting of all capacities on wall using suitable clamps, bolts and nuts and wiring using...

Supply and fixing of 3pole power contac tor with NO NC contacts on existing wood panel board using necessary bolts,nuts,washersand wiring etc., complete with AC 3 Rating and as per IS 13947.40 A

HIGH MAST :Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single Multiple telescopic sections having, minimumoverlap distance of 1.5 times of top...

Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing two coats of red oxide paint and finished with two coats of enameled paint of approved qua...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable to out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000mm Standa...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable to out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1000mm Standa...

ETP plants and machinary:Supplying of Three phase 2HP Submersible Raw water Sewage mud pumpsets 5M3 hr capacity and 7.5 mtr Head pump sets. CI. Approved Rates

Supplying of Three phase 2HP SubmersibleFilter Feed pump sets 5M3 hr capacity and 15 mtr Head pump sets.CI. Approved Rates

Supplying of Three phase 2HP Submersible Aerator pump sets 15M3 hr Air capacity .CI. Approved Rates

Supplying, Installation and Commissioning of Dual Media Filter with multi port valve and Required media. Approved Rates

Supplying and fixing of DANGER BOARD made out of MS sheet metal with two coats of non corrossive enamel paint

Supplying and installation of RUBBER MAT 1mtr x 1mtr 1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...

Labour charges for the errection of Indoor type panel boardUNITS with all necessary materials and labour tools and equipments including cement concrete for foundation bed etc, complete as per specif...

ACTVATED SAND FILTERS :Providing and fixing of 0.8 m dia pressure sand filter comprising of 5 mm thick 0.8 m dia shell joined with 10 mm thick M S flanges and Air vent pipe with gate value graded filt...

BELT SKIMMER : Providing and fixing of BELT SKIMMER with 5 LPH tray with complete arrangement for skimming out oil etc complete including all lead and lifts as per the direction of engineer i...

Pressure Sand Filter: Providing and fixing of 0.8m dia Pressure sand filter comprising of 5mm thick 0.8mm dia shell joined sand with 10 mm thick MS Flanges and air vent pipe with gate valve graded fil...

Dozing pumps with tanks providing fixing of poly electrode dozing tanks comprising of 100 litre capacity LDPE tank with electronic metering pump etc complete Approved rate

Pre filter of PVC material with a height of 500mm and 300 mm dia with 10 mm perforated holes and bifurcated with SS sheets 3mm thickness of 8mm holes ,MS handle and base

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reduce...

Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Do 600x600x3mm Copper plate

Supplying and running Copper conductor for grounding and along with other wires in conduit system of wiring using necessary suitable size clamps, nails, guttas spacers etc., 8 SWG Copper Wire

Oil skimmer Grey water is connected to oil skimmer with 1 hp motor, capacity tank of 1200mm x 1200mm x 2200mm

Aerator Air blower with motor 2 HP and aeration

tank diffuser and pvc pipeline is provided for aeration tank

Post filter Sand and Carbon Filter.II. Pressure Sand Filter, Normal Flow 3500 LPH, Filtering Media Graded Pebbles Sand, M.O.C MS, Height 1625 mm, Diameter of 450 mm, Minimum Pressure 2.0Kg cm2,...

Fire fighting Supplyerection, testing and commissioning of Fir e Fighting panel cubicle type made out of 14 16 Swg MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron...

Supply, erection, testing and commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm direct...

Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...

Supply, installation, testing and commissioning electrically driven Terrance pump of capacity 900.0 Lpm at 35.0m Head bronze impeller pump coupled to electrical driven motor with suitable HP with all ...

Supply, installation, testing and commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required ...

Supplying, installing, testing and commissioning approved make heavy duty Class C GI pipes and fittings confirming to IS 1239 PI and II, Malleable Specials such as tees, long radius bends, check...

Do 100 mm dia. mm dia

Do 32 mm dia.mm dia. mm dia

Do 25 mm dia. mm dia

Supplying Installing, testing and commissioning of Gun metal AIRRELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications

Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts and bolts etc., complete etc., complete as per specificaiton with...

FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a fem...

Supplying Installing, testing and commissioning of hydraulically operated sprinkler Gong Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, s...

Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 bindedwith one set of male and Female lnstantainious Gun metal coup...

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as p...

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...

Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural synthetic fibres, a rubber cover finish shall be smooth, fluted or f...

Wraping and Galing of U G pipe line work includes one coat of anticorrossion paint Black and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete a...

Supplying Installing of Horizantal side wall Type ,Standard Response Standard Coverage, Sprinkler, K5.6 80 ,1 2 NPT, 68 Degree C, Chrome finish, UL listed

Supplying installing, testing and commissioning of PN16 CI Non Return Valve confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all le...

Supply and installing testing and commissioning of CI Y stainer confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead lift load...

Pressure Switch including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. etc., complete as per specificaiton with all lead and lift, loading unloading, l...

Analogue Addressable 1 to 4 loop Fire Alarm Control Panel expandable via plug in loop driver boards, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addr...

Supply, installation in position, testing and commissioning of Addressable Optical Smoke Detector radio linked optical detector smoke operates with an optical sensing chamber based on the principle...

Supply, installation, testing and commissioning of RF translator wireless device which can control up to 32 detectors modules or signaling devices, configuration through manual or PC software, up to 3...

Supply, installation in position, testing and commissioning of RFexpander wireless device, two orthogonal antennas for safe radio communications, operating at frequency range of 865 MHz, 7 bi directio...

Supply, installation, testing and commissioning of Addressable Wireless Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control ...

Supply, installation in position, testing and commissioning of

Addressable thermal detector heat radio linked optical detector operates with a rate of rise thermal sensor. The detector communicates...

Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54 11 ...

Supplying of four bucket stand alongwith buckets. Complete

Supplying of first aid box. Complete

Supplying of FIRST AID CHART with lamination. Complete

Providings Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used Non Radiocactive, non phosphorous,...

Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phos phate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 14.9 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M...

Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diam...

Supply and installation of 9 Ltr Water type Fire Extinugisher, Stored Pressure Type, Pressur Gauge, Gross Weight 15.1kg. empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time less than2...

Providing 22.5Kg C02 Gas Type Fire Extinugisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 93.5 Kg.empty Weight 71.0Kg.Can Height 1333M M Diameter 232MM, Discharge Ti...