Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹37.9 L+₹2.9 L (8.33%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹39.1 L+₹4.2 L (11.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹39.2 L+₹4.3 L (12.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹39.5 L+₹4.6 L (13.1%)Rejected-Finance LIG 10 VIVEK NAGAR NAVIBAGH BHOPAL MADHYA PRADESH 462038 | BHOPAL | MADHYA PRADESH | 462038 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹50.0 L
EMD Value
₹99,900
Closing Date
7 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
CERTAIN COMPREHENSIVE BR REPAIRS AT BAIRAGARH MILITARY STATION UNDER GE BHOPAL
2023_MES_628886_1
8242/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹99,900
Yes
14 Feb 2024
18 Nov 2023
9 Dec 2023
18 Nov 2023
7 Dec 2023
2 Dec 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. Note: Rates are included making good to disturbed surfaces like plastering and finish as per existing i.e white washing/distempering.
Taking down chowkhats or frame exc 1.5 sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
S&F in window ECO 4000, of double rebate openable/fixed window made of galvanised steel powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alklied backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm, center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S.S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the concrete/Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) etc complete all as specified and directed.
M&L for cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and directed.
S&F of factory made solid wood plastic composite (WPC) door frame 90 mm x 45 mm made from wood plastic composite (single extruded process) material with density 780 kg/cum as per manufacturer instruction and drawing complete all as specified and directed. Make :- M/s Accucell/M/s Dura plast Extrusion/M/s Rajshri Plastiwood/M/s Sintex Industries.
S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) proof and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be included in item. Make :- M/s Rajshri plastiwood /Jain wood Industries/M/s Goel Brothers,/M/s Goyal Industries/M/s Pioneer Timber Chandigarh.
S&F of factory made solid pvc flush shutter 28 mm thick, made from co- extruded three layer rigid PVC foam sheet (single extruded) with density not less that 600 kg/cbm outer layer (0.8-1 mm) thick should be of rigid pvc with density of not less than 1400 kg/cum manufactured by an ISO 9001-2015 certified company. Door should be water proof, Termite proof, fire retardant & having good screw holding capacity as per manufacturers drawing and complete all as specified and directed. Make :- M/s Accucell/M/s Dura plast Extrusion/M/s Rajshri Plastiwood/M/s Sintex Industries.
S&F of 30 mm thick solid WPC wire mesh door shutters decorative type laminated of required size comprising of virgin PVC resin of K Value 57-60 (Suspension grade), calcium carbonate and natural fibres (Wood powder/ rice husk/ wheat husk) and non toxic additives, made from exrusion process WPC foam sheet single extruded (inner) with having min density not less than 600 Kg/Cum, having good screw holding capacity (Screw withdrawl strength 2000 N (face) & 1100 N (Edge), Min compressive of 50N/mm2, modulas of elasticity 850 N/mm2 and resistence of spread of frame of class A catagory with property of being termite / borer free. Water/moisture proof and fire retardent. WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted on both faces of shutter for fixing mosquito mesh and XTN aluminium mesh combinely panel area of door except styles and rails to be panelled with mesh with self tapping round headed screws at required distence, screws and edges covered with feathered PVC edge beading alround of mesh and fixing stainless steel butt hinges of required size with with necessary full body threaded star headed counter shunk SS screws complete all as specified and directed. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company.
S&F in repairs decorative laminated 0.9 mm, type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S&F of 150 mm stainless steel handles ISI marked, cast type, complete all as specified and directed.
S&F of 150 mm stainless steel tower bolts ISI marked, extruded section and fixed complete all as specified and directed.
S&F of 100 mm but hinges, extruded stainless steel ISI marked, complete all as specified and directed.
S&F of 300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed.
Hacking out old broken glass of any thickness and any size, from steel/wooden frame complete all as specified and directed.
S&F in repairs 3 mm thick, frosted sheet glass, ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed.
S&F in repairs 3 mm thick, sheet glass ordinary, quality and glazing with oil putty in square n.exc .50 sqm in each pane complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed and with tinned tacks, or galvanised wire staples complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc 40 sqcm and over in section, in any posotion for unframed works complete all as specified and directed.
S&F of rolled mild steel work as in rafter, purlins, trusses, posts, poles etc. and like (beam, tee, angle, channel or flat sections (Fe 410-W, Gde E-250, quality-A, complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
S&F of pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.
S&F of pre-painted galvalume aluminum zinc coating GI Based, plain steel sheeting of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.
M&L for granite (any type), 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick or concrete surface in CM 1: 6 finishing the surfaces fair and even without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.
Taking down existing water proofing treatment of any description including PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment including make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed.
M&L for water proofing roof treatment to non accessible /accesible RCC roof with APP modified membrane with non woven polyster reinforced weight not less than 3 Kg/Sqm of thickness not less than 3 mm having thermal, insulation with white or plain finish on upper side of membrane uniformely embedded during manufacturing process including taking down existing treatment all as per following specifications:- (a) 10 mm thick plaster in CM 1:4 mixed with and including water proofing compound @3% by weight of cement applied over roof slab. After the plaster is cured the roof will be tested for water tightening by ponding with water for 72 Hrs for any seepage / leakages etc. if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repired the slab will be tested for watertightness against before processing further treatments. (b) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the groove shall be cut around to tuck in the treatment as pipes, chimney stacs etc. and other similar situations to ease up about corners. (c) Bituminous primer conforming to IS: 3384-1965 @ 0.30 Kg/Sqm to be applied on prepared surface till the surface is properly impregnated. (d) APP modified water proofing membrene as specified shall be laid by torch application method laid on hot bitumen 85/25 grade (bonding material) at the rate of 1.2 kg/sqm primer surface as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. (e) All joints and changes in direction should be curved with cement morar 1:3 mixed with SBR latex @ 200 ml per beg of cement and cured well before laying the membrane. (f) A fillet of PCC (1:2:4) type B-0 of 100 mm x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.
Disconnecting of existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position capacity of tank exc 1000 ltr and n.exc 2000 ltr complete all as specified and directed. Note :- Rate inclusive of temporary connection for supply of water to all qtrs.
Dismantling of water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed.
S&F of 1000 Ltr rotational moulded polyethylene water stotage tanks, ISI marked, including ball valve (cylinderical verticle with closed top) hoisted and fixed in position complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) including mixing with water proofing compound complete all as specified and directed. Note: WPC will be measured and paid separately.
Supply only integral water profing compound complete all as specified and directed.
M&L for preparation of old/ new surfaces of walls by scraping, removing existing treatment and apply two coat of damp proof chemical over new plastered /old plastered surfaces as per manufacturers instruction complete all as specified and directed. Note :- Work shall be carried out through authorised applicator/manufacturer only.
M&L for repairing roofs, chhajjas etc with and including comprising of following steps :- a) Cleaning and drying thoroughly existing surface of roof, chhajjas etc for all foreign matters such as fungus, moss dust etc by wire brush and dusting. b) Removing loose concrete, surface cracks etc and then applying / filled with Dr Fixit crack X or polymer modified mortor in case of wider cracks (bitumen based waterproofing treatment must be removed by mechanical scarification) c) Applying one coat Dr fixit roof seal top coat (diluted with water 2:1) at the rate of 100-110 sft/ ltr and then allow it to dry for 2-3 hrs d) Applying two coat Dr fixit roof seal top coat (diluted with water 2 :1) embed a glass fibre mest (2x2 mm - 40 gms ) between the first and second coat as reinforecement complete all as specified and directed. Note :- Work shall be carried out through authorised applicator only of the product.
M&L for cleaning and drying thoroughly existing surface of walls, roofs, chajjas, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting; applying two coats of polymer modified cementations based protective and water proofing coating as per manufacturers instruction complete all as specified and directed. MAKE: ACROCOAT / FOSROC/STP or equivalent as approved by GE.
M&L for grouting of slab/ beam by fixing 12mm dia PVC nozzle and pressure injection by cement slurry of 50 kg cement mixed pidicrete SM 225 gms of M/s pidilite industries Ltd or cabex 100 of m/s Fosroc chemical) with pressure not less than 2 kg/ m2 including necessary drilling, nozzles, pluging etc as per manufacturers instruction for grouting complete all as specified and directed.
Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness and any position including cover fillets complete all as specified and directed.
M&L for galvanised cold rolled steel section frame work size 600x600mm grid size using 24 x 38 x 0.50mm (composite thickness) tee (bottom pre-coated) and 24 x 24 x 0.50mm (composite thickness) wall angle galvanised cold rolled steel section including suspenders as per (Gabsec) manufacturs instruction as in ceiling complete all as specified and directed. Make : GAPSON (Gabsec) or equivalent as approved by the GE.
M&L for asbestos free calcium silicate board of size 600 x 600 x 4 mm thick decorative type fire resistant, moisture resistant and tested as per IS 14862-2000 fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick dark shade (square/rectangular), digital polished, area of each tiles not exc 0.36 sqm, in floors/skirting etc. complete all as specified and directed.
Screed bed or bedding layer of mortar 15mm thick (1:6) for laying floor finish complete all as specified.complete all as specified and directed.
Demolition of cement concrete in ground floor, (unreinforced) paving n.exc 15 cm thick (below or above GL) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub-base and mass concrete complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per item No. 53.00 here-in-before but on skirting 20-25mm thick kota stone including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for non skid ceramic/ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors/skirting over 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450X350X7mm thick set and jointed over 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.
M&L for heavy duty flooring tiles, harsh weather and UV resistance, high abrasion resistance, MOH hardness >6 thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type laid in floors, steps, edges etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with and including 15 mm thick rendering in cm 1:4 complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.
M&L for sand filling under paver block watering and consolodation complete all as specified and directed.
M&L for water proofing treatment to sunken surfaces of slab in following sequence complete all as specified and directed:- (a) Slope correction providing PCC 1:1.5:3 (using 12.5mm graded stone aggregate), average thickness 25mm, mixed graded stone aggregate, mixed with integral water proffing compound "DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE, in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5kg/sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (f) 48 hrs testing of treatment for water thightness by ponding of water.
Taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F of 15mm GI tube, medium grade, with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F of 20 mm GI tube, medium grade, with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings in brick wall where required and pointing in cement mortar 1:3 to ends cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 20 cm girth complete all as specified and directed.
S&F in repairs 15 mm pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm bib taps, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixing complete all as specified and directed.
S&F of 15 mm stop valves, cast copper alloy, chromium plated, screwed down high pressure, with crutch or butterfly handle, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed.
S&F in repairs vitreous china squanting pan "Orissa" pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) including cement concrete bedding complete all as specified and directred.
S&F of vitreous china oval shaped cunter top wash basin, white, flat back, Size 550x400mm including waste pipe, coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed.
S&F of china wash down water closet pan (Pedestal Pattern), white, pedestal pan and 'P' or 'S' trap, plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs vitreous china wash basin, white, flat back, Size 630x450mm including brackets, waste pipe, coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed.
S&F in repairs plastic water closet seat, closed pattern with flat bottom and cover dand mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs PVC low level flushing cistern, 10 liters capacity, syphonic action, ISI marked white with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe complete all as specified and directed.
S&F in repairs health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and directed.
S&F of PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.
S&F of PVC (SWR) 75mm bore, bends any radious complete all as specified and directed.
S&F of PVC (SWR) junction single, SingleT, 75mm bore equal or unequal complete all as specified and directed.
S&F of PVC (SWR) junction single, doubleT, 75mm bore equal or unequal complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints laid in trenches, floors or fixed in walls complete all as specified and directed.
S&F of PVC (SWR) 110mm bore, bends any radious complete all as specified and directed.
S&F of PVC (SWR) Junction, Single T, 110mm bore equal or unequal complete all as specified and directed.
M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
M&L for cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in coping, haunching etc for drain and similar works complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of acrylic exterior water base emulsion paint on walls complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and directed. Note: Putty shall be measured and paid for seperately under respective item.
M&L for applying one coat of white wall care putty 3mm thick on walls complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 48720.00
ROYAL CONSTRUCTION
PADAMSHRI CONSTRUCTION CO
M/S Shanti Traders
PRAGATI ELECTRICALS AND ELECTRONICS
M/s AKG Engineers & Contractors
M/s VIKAS TRADERS
NDS TRADERS
RAJPATI CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .