CERTAIN REPAIR TO ROOF TREATMENT, CHHAJJA REPAIR AND OTHER MISC WORK, REPAIR OF ROLLING SHUTTER, COLAPSIBLE GATE, STAINLESS STEEL WORK AND ROOF SHEET ETC OF RESTRICTED AND UNRESTRICTED AREA OF COD AND 506 ABW UNDER AGE BR-II OF GE(EAST) JABALPUR

Amount

UNRESTRICTED AREA SCH

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete.

Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.

Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard weight not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Applying two coats of bituminous base aluminium paint including preparation complete.

M&L PCC tiles 250 x 250 x 20mm thick laid over 15mm thick cement mortar (1:4) and jointed with filler compound complete (over mebrens).

S&F 150mm wide Aluminium dividing strips, 1.5mm thick & inserted in position as in crumple complete.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

All as per Srl item No 4 bere-in-before but 5000 litre of water tank.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Litre Capacity.

All as per Srl item No 6 bere-in-before capacity of water tank 1000 litre.

All as per Srl item No 6 here-in-before but capacity of water tank 5000 litre.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 250 & n exc 500 litres.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 500 & n exc 1000 litres.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately). 5000 litres capacity.

Cleaning & removing all scale & dirt, etc. from tanks & from mouths of circulating pipes, etc exc 250 but n exc 500 litres incl washing with bleaching and clean with water to the original surface. All scales, dirts etc will be disposed off as directed by Engr-in-Charge.

Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc exc 500 but n exc 1000 litres including washing with bleaching and clean with water to the original surface. All scales,dirts etc will be disposed off as directed by Engr-in-Charge.

Cleaning & removing all scale & dirt, etc from tanks & form mouths of circulating pipes, etc 5000 litres including washing with bleaching and clean with water to the original surface. All scales, dirts etc will be disposed off as directed by Engr-in-Charge.

S&F Ball brass valves 15mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule.

S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 32mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 40mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 50mm bore, with iron wheel head, screwed both end for iron pipe.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 23 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 23 here-in-before but 40mm bore pipe all as specified and directed by Engr-in-Charge.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge. Make:- Jandal/ Prakash /TATA

All as per Srl item No 26 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

All as per Srl item No 26 here-in-before but 40mm dia all as specified and directed by Engr-in-Charge.

Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge.

All as per Srl item No 29 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

All as per Srl item No 29 here-in-before but 40mm dia all as specified and directed by Engr-in-Charge.

Dismantling of plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws any height of building all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws any height of building all as specified.

S& F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length & girth as fixed) with grade of zinc coating 275 of 1.00mm thick any height of building.

S&F,6mm thicks non asbestos cement sheet corrugated or semi -corrugated sheets in roofs ,wall , fixed with L-type or J-type or cranked hook bolts any height of building complete all as specified & directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel gate sheeting or other covering,doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed confirming to FE-2990 ( Gde E-165).

S & F welded steel wire fabric and fixed complete to wood or steel members weight n.exceeding 4 Kg/ Sqm complete all as specified and directed

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F Mild steel sliding door bolts 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate.

Taking down of eves gutter, rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per Srl item No 43 here-in-before but 75mm bore complete all as specified and directed.

All as per Srl item No 43 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mm by 3 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L RCC type B0 (1:2:4) using 12.5 mm graded aggregate in Chajjas, fins,fecia,parapet wall complete.

Formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat.

M&L Mild steel round bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I).

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 n sqm not exceeding 0.18sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

Material and labour for Glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) as on ceiling complete.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:4) as on fins, drop etc complete.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.

Applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete & screwing etc wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome.

Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc in walls, Ceilings, stanchions, beams, etc. including all laps, cutting & waste.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5 mm size aggergate) as in floors as sub base using extra cement in patches all as specified and directed by Engr-in-Charge.

Dismantling/taking down u/s parts of steel rolling shutters (self coiling types shutters i.e push pull machenicaly type with gear operating system and for repairing and overhauling of rolling shutters and greasing/oiling of members of rolling shutters. M&L for preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified. Note : (i) Refixing of rolling shutters duly repaired/overhauled/painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of rolling shutters shall be included in the quoted rate of this item. (iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supplying only under the relevent items. (iv) Makes/Size/ Specifications of new parts of rolling shutters as per existing specificarion of rolling shutters. (v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified.(area of rolling shutter ).

S&F Saftey lever locks and gear mild steel with 4 leavers for rolling shutters complete as per existing make/size.

Supply only MS sheet 1.25mm thick for hood cover complete all as specified.

Supplying only curtain ie interlocking lath sections formed from cold rolled steel strip 1.0mm thick complete.

Supply only helical wire spring or flat spiral spring complete.

Supply only ball bearing (ISI marked) size and make as per existing for rolling shutters complete all as specified and directed.

Supply only 40mm bore solid pipes heavy weight for suspension shaft complete.

Dismantling of AC corrugated/semi corrugated sheets as in roof covering complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

All as per Srl item No 86 here-in-before but fixing only( Height of Bldg upto 12.50mtr).

S&F MS hand rails, half round or other section for wind ties for roof including securing bolts; , drilling holes, notching all as specified and directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290 Gde-E-165 (Brackets over 10 kg each to be measured 'Structural Steel').

Supply & fixing frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing.

Forming jambs, etc., to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete New work built in CM(1:4) or cement lime mortar (1:2:9)

Applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600 x 600mm compressing of GI powder coated main runner of dimension 39mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. Make : Armstrong/Ramco/Visaka

All as per Srl item No 94 here-in-before but fixing only.

Rough cast wired glass, 6.4mm thick and glazing with oil putty in square incl Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. (only for soak well).

Preparation of old plastered surface and applying one coats of Distemper oil emulsion, white or tinted complete all as specified and directed.

Repair of collapsible gate of any size with oiling and greasing incl taking down the gate as required and fix in position after repair and make it easy to operate complete incl synthetic enamel/ aluminium paint as per existing. Note: (i) Any bend or damage flat shall be repair/replaced incl all revet of work required (ii) Replacement of hanging rails.

RESTRICTED AREA SCH

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete.

Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.

Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

Applying two coats of bituminous base aluminium paint including preparation complete.

M/L PCC tiles 250 x 250 x 20mm thick laid over 15mm thick cement mortar (1:4) and jointed with filler compound complete ( over mebrens).

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity.

All as per Srl item No 106 here-in-before but capacity of water tank 1000 litre.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 250 & n exc 500 litres.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 500 & n exc 1000 litres

Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc.exc 250 & n exc 500 litres incl washing with bleaching and clean with water to the original surface. All scales,dirts etc will be disposed off as directed by Engr-in-Charge.

Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc.exc 500 & n exc 1000 litres incl washing with bleaching and clean with water to the original surface. All scales,dirts etc will be disposed off as directed by Engr-in-Charge.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 112 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-Charge.

S&F Ball brass valves 15mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule.

S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 32mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 40mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repair Gun-metal, globe or gate valves 50mm bore, with iron wheel head, screwed both end for iron pipe.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge. Make:- Jandal/ Prakash /TATA

All as per Srl item No 122 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge.

All as per Srl item No 124 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

Dismantling of plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws any height of building all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S& F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

S&F,6mm thicks non asbestos cement sheet corrugated or semi -corrugated sheets in roofs ,wall , fixed with L-type or J-type or cranked hook bolts any height of building complete all as specified & directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-2990 ( Gde E-165).

S & F welded steel wire fabric and fixed complete to wood or steel members weight n.exceeding 4 Kg/ Sqm complete all as specified and directed

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F Mild steel sliding door bolts 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per Srl item No 135 here-in-before but 75mm bore complete all as specified and directed.

All as per Srl item No 135 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L RCC type B0 (1:2:4) using 12.5 mm graded aggregate in Chajjas.

Formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat

M&L Mild steel round bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I).

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 n sqm not exceeding 0.18sqm , etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 300X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4and to be finished even and smooth without using extra cement complete all as specified and directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes. Note:- Work of washed stone grit plaster shall be carried out at following method : (i) Providing and laying 30mm thick grit wash plaster finish in two coats at all levels incl scofolding, curing etc complete as per specification detailed below. All cement used shall be from a single approved source to ensure uniformity in colour. (ii) Applying appropreate bonding coat (NITO BOND) or equivalent) as per manufacturers instructions on prepared surfaces of concrete/brick work. (iii) An under layer of 15mm thick in in cement plaster 1:4 mixed with approved internal water proofing compound as per manufacturers instruction shall be provided. This layer shall be roughed to provide adequete bonding for the next/second layer. Minimum 48 hrs curing shall be carried out before applying the second layer. (iv) A thick coat of cement slury shall be applied over the under layer. (v) Top layer of 15mm thick mixed with cement and stone grit in 1:1 (1 cement including 15% wt mortar to cement shall be provided immediately in pannel with grooves as directed by GE. (vi) The aggregate plaster finish shall be laid in pannels with grooves of 15mmx15mm shall be provided with hard wood teppered beading with application of shuttering oil between pannels and corners. (vii) Curing for 7 days shall be done. Excess mortar on the surface of the aggregate shall be removed by washing with water or with solution of dilute hydrochloric acid. (viii) All grooves shall be pointed with CM (1:1) with water proofing compound as per manufacturer instruction to a depth of 6mm and cured. (ix) The cement used shall be of 50% PPC and 50% white cement of birla white or equivalent.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.

Applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5 mm size aggergate) as in floors as sub base using extra cement in patches all as specified and directed by Engr-in-charge.

Dismantling/taking down u/s parts of steel rolling shutters (self coiling types shutters i.e push pull machenicaly type with gear operating system and for repairing and overhauling of rolling shutters and greasing/oiling of members of rolling shutters. M&L for preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint / aluminium paint as per existing complete all as specified. Note : (I) Refixing of rolling shutters duly repaired/overhauled/painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of rolling shutters shall be included in the quoted rate of this item. (iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supplying only under the relevent items. (iv) Makes/Size/Specifications of new parts of rolling shutters as per existing specificarion of rolling shutters. (v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified.(area of rolling shutter.

S&F Saftey lever locks and gear mild steel with 4 leavers for rolling shutters complete as per existing make/size.

Supply only MS sheet 1.25mm thick for hood cover complete all as specified.

Supplying only curtain ie interlocking lath sections formed from cold rolled steel strip 1.0mm thick complete.

Supply only helical wire spring or flat spiral spring complete.

Supply only ball bearing (ISI marked) size and make as per existing for rolling shutters complete all as specified and directed.

Supply only ` 40mm bore pipes heavy weight for suspension shaft complete.

Dismantling of AC corrugated/semi corrugated sheets as in roof covering complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

All as per Srl item No 129 here-in-before but fixing only( Height of Bldg upto 12.50mtr).

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length & girth as fixed) with grade of zinc coating 275 of 0.80mm thick. ( Height of Bldg upto 12.50mtr).

S&F MS hand rails, half round or other section for wind ties for roof including securing bolts; , drilling holes, notching all as specified and directed.

Forming jambs, etc., to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete New work built in CM(1:4) or cement lime mortar (1:2:9).

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm compressing of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. Make : Armstrong/Ramco/Visaka.

All as per Srl item No 183 here-in-before but fixing only.

Rough cast wired glass, 6.4mm thick and glazing with oil putty in square incl Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. (only for soak well)

Preparation of old plastered surface and applying one coats of Distemper oil emulsion, white or tinted complete all as specified and directed.

Repair of collapsible gate of any size with oiling and greasing incl taking down the gate as required and fix in position after repair and make it easy to operate complete incl synthetic enamel/ aluminium paint as per existing. Note: (i) Any bend or damage flat shall be repair/replaced incl all revet of work required (ii) Replacement of hanging rails.

Taking down steel sliding door shutters area exc 10.00 Sqm but n.exc. 15.00 Sqm and for repairing and overhauling of sliding shutters and greading/oiling of members of shutters and fixed in old position with and including change of mild steel pulley of dia n. exc 150mm, 02 nos in each panel and change of brass supporter/guides in bottom 02 nos in each panel with and including preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified.

Schedule of credit amount of Rs. 1,07,283.00 to be deducted during AOC

R R VISHWAKARMA CONSTRUCTION CO

MAYANK CONSTRUCTIONS

LAL SINGH & SONS