GE S U 06 2022 23 PROVN OF 05 X SHED PATHWAY AND SPECIAL REPAIR TO BUILDING NO P170 UNDER GE SOUTH UDHAMPUR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position etc complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in slab supported on walls/chajjas and the like complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping complete all as specified and as directed.

Mild Steel TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and as directed.

Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed.

Non skid coloured ceramic tiles (square/rectangular) 8 to 9 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles complete all as specified and as directed.

Glazed coloured ceramic tiles in dado/vertical surface of size 600mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

150mm wide strip of makrana white marble 20 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and as directed.

Material and labour 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Rendering 15mm thick in two layer (10+5 mm) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed. Note :-Water proofing compound to be measured and paid for separately.

Preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Repairs of spalled concrete in soffit of slabs with structural grade light weight polymer mortar Providing, mixing and trowel application of pre packed, structural grade light weight, polymer modified cement mortar, Renderoc S2 at an average thickness of upto 25mm to the prepared concrete substrate in sofit of slabs including finishing of applied polymer mortar all in complete as per the technical specification complete all as specified and as directed.

Preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling complete all as specified and as directed.

Preparation old surfaces including complete removal of existing surface of white wash and applying two coats of white wash on ceiling complete all as specified and as directed.

Applying three coats of white wash on newly plaster surfaces of wall over including preparation of surfaces complete all as specified and directed.

Preparation old surfaces including complete removal of existing surface of white wash and applying two coats of white wash on walls complete all as specified and as directed.

Preparation of surfaces of wall and applying two coats of weather proof exterior emulsion paint complete all as specified and as directed.

Applying two coats of wall care putty on walls including preparation etc complete all as specified and as directed.

Two coat of oil bound distemper including a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Preparation old surfaces including complete removal of existing surface and applying two coats of oil bond distemper on walls complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 125mm x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 105mm x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and as directed.

Steel window (box type) with gauzed shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge,Glass shall be measured and paid separately.

Description all as per Srl Item No. 39 here in before but without glazing bar complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Factory made mild steel ventilators box type with upper top hung with glazed and gauzed shutters and bottom openable,locking arrangements type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately.

Factory made mild steel ventilators box type with upper top hung with glazed and gauzed shutters and bottom openable type,locking arrangements shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and as directed. (without frame but frame to be made along with door) Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing, frame work for water tanks, cup Board etc and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

Providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

Cutting holes exceeding 150 sq.cm but nexc 400 sq.cm in to brick walls built in CM and making good in cement concrete 1:2:4 type B-1 for fixing of cooler Brackets etc complete all as specified and as directed.

Butt hinges 75mm, medium weight ,cold rolled mild steel complete all as specified and as directed.

18/19 mm thick block boards grade 2 quality enterior grade, Commercial type fixed with screw or Steel frame/Timber frame including teak wood lipping, 6mm thick fixed with Nail complete all as specified and as directed.

100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

Mild steel 150 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and as directed.

Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and as directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty n.exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed.

Galvanised Mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. (ISI Mark)

150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. (ISI Mark)

150 mm aluminium handles, cast type anodised complete all as specified and as directed. (ISI Mark)

100 mm aluminium handles, cast ype anodised complete all as specified and as directed. (ISI Mark)

Aluminium drapery rods of 25 mm dia decorative type with wooden finish alongwith holding for brackets & end caps in repairs complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet, reinforced with M.S. Square tube, in opening complete all as specified and as directed.

Factory made solid panel PVC door shutter 28 to 30mm thick style ,with 2,4 or 6 raised panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm Prelam PVC sheet on back face complete all as specified and as directed.

Preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified and as directed.

Demolition of brick/stone masonary built in cement mortar complete all as specified and as directed.

Brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 bricks complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneelers apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3.0 Kg/ sqm including 10mm thick flooring in CM (1:3) finished even and smooth mixed with water proofing compound complete all as specified and as directed. (WPC shall be measured and paid separately).

Applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm and applying aluminium Paint complete all as specified and as directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

S&F in repair vitreous China wash basin, white, flat back , size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with pedestal, long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580mm x 440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified and as directed.

10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and as directed.

Aluminium tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs complete all as specified and as directed. (ISI Mark)

Steel peg set colour coated of six as per sample in repairs complete all as specified and as directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and as directed.

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed. (ISI Marks)

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in wall complete all as specified and as directed.

Salt glazed stone ware gully traps square or round mouthed, type P of size 150mm x 150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and as directed. (ISI Marks).

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed.

Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit complete all as specified and as directed.

110 mm bore PVC (SWR) bends and fixed with joint sealent etc complete all specified and as Directed

110mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall including clamp etc complete all as specified and as directed.

Stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe complete all as specified and as directed.

Viterious china urinals half stall white including CP urinal Spray Nozzal complete including providing and fixing of plug bedding urinal against wall in cement motor 1:2 securing urinal to plug with and incl 60mm long brass screws pointing incl 60mm long brass complete all as specified and as directed.

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and as directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor complete all as specified and as directed.

Taking down 15mm Bore steel tubing and connections including all fittings and removing to store complete all as specified and as directed.

Taking down 20mm Bore steel tubing and connections including all fittings and removing to store complete all as specified and as directed.

15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls including cancealed and or laid under floors etc complete all as specified and as directed.

20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm complete all as specified and as directed.

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm complete all as specified and as directed.

Chromium plated cancealed stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions chromium plated of size 15 mm complete all as specified and as directed.

S&F in repairs pillar tap, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed of bore dia 15 mm complete all as specified and as directed.

S&F in repairs bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe of size 15 mm bore chromium plated complete all as specified and as directed.

S&F repairs Ball Valves high pressure 20 mm bore of pipe of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm- 210 grms complete all as specified and as directed.

M & L in repairs brass chromium plated shower rose 75mm size with swivel joint fixed to pipe or union of 15mm bore complete all as specified and as directed.

Dismantling water tanks exc 500 Ltr capacity but n.exc 1000 ltr ccomplete all as specified and as directed.

Rotational moulded polyethylene water storage tanks with threaded head ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified and as directed.

Supply and fixing 15 mm bore chromium plated concealed stop cock fancy type long shank and cup complete all as specified and as directed.

Soap dish chromium plated fixed with brass screws and wooden/plastic cleats complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

100mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundations filling and mass concrete complete all as specified and as directed.

Sand cushioning under floors including watering and consolidation complete all as specified and as directed.

Coloured machine vibro mechanically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with,topping of cement mixed with imported pigment,colour and shape complete all as specified and as directed colour & shape shall be approved by GE. ISI Marked.

Providing precast cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, kneelers apex stones , bed plates, kerbs stone provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil/strata for foundation, etc, or for shafts, wells, drain pipes and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing surplus spoil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed..

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Providing 200mm bore pipe concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested.in mix 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) complete all as specified and as directed.

200mm bore reinforced concrete pipes, class NP-2, laid and jointed complete with coller complete all as specified and as directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slab, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

Rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel of 150mm internal dia of pipe (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

Walling of random rubble,uncoursed,well bonded,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed.

All as per srl item No.118, but except stone complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in surafce channel and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etc complete all as specified and as directed.

20mm thick rendering on fair faces of brick work or concrete surfaces in cement motor 1:4 and finished even and finished even and smooth without using extra cement complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregates) as in coping etc complete all as specified and as directed.

Excavation in post holes (or similar holes) in any type of soil, each n.exc 0.50 cum, getting out, removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and as directed.

Rolled Mild steel work conforming to Fe - 410 W (Gde E-250 Quality B) as in single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections etc complete all as specified and as directed.

Rolled mild steel conforming to Fe - 410 W (Gde E-250 Quality B) in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick crimpted/tapard at the external end of any colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of black bituminous paint complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point complete all as specified and as directed.

75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,Laid in trenches or in floorcomplete all as specified and as directed.

PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in surface channel and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etccomplete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in floor/ sub-base complete all as specified and as directed.

100mm hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to true surface complete all as specified and as directed.

80mm thick Machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006, M-40 grade, with topping of cement mixed without pigment. Colour complete all as specified and as directed and shape shall be approved by GE. (Make: ULTRA/MODERN/RUCHI/ISI Marked).

Precast cement concrete 1:2:4 type B-1 as in edges, kerb stone etc and other similar works including weathering and slightly rounded and chamfered angles complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Point wiring for one light point /fan point/ bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit ( ISI marked ) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and as directed.

All as per description of Ser Item No. 141 here-in-before but for one 3 pin 5 Amp socket outlet point controlled by one push button on same board complete all as specified and as directed.

All as per description of Ser Item No.141 here-in-before but for one 3 pin 5 Amp socket outlet point controlled by one push button on independent board, complete all as specified and as directed.

All as per description of Ser Item No.141 here-in-before but for one 3 pin 15A socket outlet on independent Board with PVC insulated unsheathed FRLS cable 4 sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 2.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete all as specified and as directed.

Switch piano flush button single pole one way 5 amps 240 volt complete all as specified and as directed.

Socket outlet 2 in 1, 3 pin, 5A, 240 Volt complete all as specified and as directed.

Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts complete all as specified and as directed.

Switch socket combination 5 pin 16 amp, flush type complete all as specified and as directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and as directed. Make : Cona Cat Part No 2126/SSK Cat Part No 572 or equivalent.

Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed.

Taking down ceiling fan of any size after disconnecting the wire from existing ceiling rose and deposited to MES Store (AGE E/M Sub Divn) and Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with bursh less direct current motor (BLDC) complete all as specified and as directed.

Taking down Exhaust fan of any size after disconnecting the wire from existing ceiling rose and depositeed to MES Store (AGE E/M Sub Divn) and Supply & fixing exhaust fan, steel body, AC single phase 230/240 volts heavy duty of size 300mm sweep with blades, frame, louvers and all fixing arrangements complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

MCB Single Pole, 230 Volt, Raiting 10 to 40 Amps, C Curve complete all as specified and as directed.

MCB Single Pole and Neutral , 230 Volt, Raiting 63A, C Curve complete all as specified and as directed.

MCB TPN 415 volts, 10 KA, 4 Pole 63 Amps, C Curve complete all as specified and as directed.

S&F in replacement sheet metal enclosure MCB distribution board Triple pole and neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4.0 Sq mm as earth lead complete all as specified and as directed. Including taking down old sub main wire.

Sub main wiring (For Geyser power point) with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5Sq mm as earth lead complete all as specified and as directed.

Sub main wiring (For bldg security light) with two single core PVC insulated with copper conductor cable stranded of size 2.5Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.5Sq mm as earth lead complete all as specified and as directed.

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate , NRV, connection piece etc complete all as specified and as directed.

Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.30 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

RAJ MOHD

SODHI TRADING CORPORATION

BHAGWATI TRADERS

M/S ASHOK KUMAR PACHIALA

shri ram dubey

joginder singh and sons

PARDEEP SHARMA