Annual Maintenance of Residential and Non-Residential Buildings in RGTPP Colony, Khedar 2020-2021

Amount

Providing services of plumbers for attending various civil works as mentioned in scope of work attached at Annexure-A. Note:- Minimum 2 no. Plumbers is to be deployed by the firm for carrying out above said work. In case of requirement at site ,the firm must deploy additional plumbers and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in clause no. 8 (ii) of NIT general terms & conditions.

Providing services of Carpenter for attending various civil works as mentioned in scope of work attached at Annexure-A. Note:- Minimum one no. carpenter is to be deployed by the firm for carrying out above said work. In case of requirement at site ,the firm must deploy additional plumbers and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in clause no. 8 (ii) of NIT general terms & conditions.

Providing unskilled workers for attending various civil works as mentioned in scope of work attached at Annexure-A. Note:- Minimum 2 no. unskilled workers is to be deployed by the firm for carrying out above said work. In case of requirement at site ,the firm must deploy additional p and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in clause no. 8 (ii) of NIT general terms & conditions.

Providing services for supervisor for attending various civil works as mentioned in scope of work attached at Annexure-A. Note:- Minimum one no. Supervisor is to be deployed by the firm for carrying out above said work. In case of requirement at site ,the firm must deploy additional supervisor and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in clause no. 8 (ii) of NIT general terms & conditions.

Providing services for Operation of Pumps for Drinking Water System at various locations & Operation of de-watering pumps to evacuate the water from basement of all residential and non-residential buildings in RGTPP Colony Area Note :- Minimum two no. pump operators is to be deployed by firm in two shifts during the period from 5:00 AM to 10:00 PM on Daily basis with all necessary tools & Plants.

Supplying Aluminum electroplated sliding bolts 300x16mm Godrej/Classic/shubham/swell/Vectus/visko (NS item)

Supplying CI inspection chamber cover size of 300mmx300mm to 600 mm x 600 mm as per direction of Engineer-in-charge . (NS item)

Supplying Aluminum electroplated Tower bolts 200x16mm to 300x 16 mm(NS item)

Supplying Aluminum Door Handles 150mm to 250 mm( NS item )

Supplying short body/long body SS coated/brass Pillar cock of ESS Ess trend/ Cera/ (Avery)/ Hindware, Perryware/ kaba make. (NS item)

Supplying PVC Connection of dia 15 – 20 mm & length is upto 1' of Finolex,Supreme UNIk (ISI 1st Quality),Ravindra, Prince,Pearl,Pryag(NS item)

Supplying PVC Connection of dia 15 – 20 mm & length is upto 2 feet of Finolex,Supreme UNIk (ISI 1st Quality),Ravindra, Prince,Pearl,Pryag (NS item)

Supplying PVC Connection of dia 15 – 20 mm & length is upto 4 feet of Finolex,Supreme UNIk (ISI 1st Quality),Ravindra, Prince,Pearl,Pryag (NS item)

Supplying CP Floor Jali ISI MARK 1st Quality. (NS item)

Supplying Float valve 15mm for PVC cistern of Prayag, Pearl, Jindal, Hindware. (NS item)

Supplying Float valve 25mm for water tank complete set of Prayag, Pearl, Vectus make. (NS item)

Supplying Float valve 20mm for water tank complete set of Prayag, Pearl, Vectus make. (NS item)

Supplying L Drop of required size (Door Handle) Classic, swell, ISI Mark 1st quality. (NS item)

Supplying of 19mm plywood board (ISI Mark) (NS item)

Supplying ball for float valve of Prayag, Pearl, Vectus(NS item)

Supplying Washbasin mixer & its legs Ess, Pearl, Vectus, kaba. (NS item)

Supplying PVC waste pipe for sink/ wash basin of Prayag, Jindal, Pearl, Vectus(NS item)

Supplying GI Socket ¾"of Unik,Jindal,TATA,Prakash,Surya (NS item)

Supplying GI Socket ½" Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI Socket 1" of Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI Socket 2" of Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI TEE 1" of Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI TEE ½" of Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI TEE ¾" of Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI TEE 2 "of Unik,Jindal,TATA,Prakash,Surya ( NS item )

Supplying GI reducer 1/2" x 3/4"ofUnik,Jindal,TATA,Prakash,Surya . ( NS item )

Supplying GI reducer 1" x 1/2" of Unik,Jindal,TATA,Prakash,Surya .(NS item)

Supplying GI reducer 1" x 3/4" of Unik,Jindal,TATA,Prakash,Surya .(NS item)

Supplying PVC Socket 1/2”-2" of Finolex,Supreme UNIk (ISI 1st Quality),Ravindra, Prince(NS item)

Supplying PVC Socket 2”-4” of Finolex,Supreme UNIk (ISI 1st Quality),Ravindra, Prince (NS item)

Supplying PVC TEE 3"-4” of Finolex,Diplast ,UNIk (ISI 1st Quality) (NS item)

Supplying PVC TEE 2" of Finolex,Diplast ,UNIk (ISI 1st Quality) (NS item)

Supplying PVC TEE ½” to 1" of Finolex,Supreme UNIk (ISI 1st Quality),Ravindra, Prince (NS item)

Supplying PVC Elbow ½"-1” of, Diplast ,UNIk ( ISI 1st Quality) (NS item)

Supplying Sink Jali of ISI 1st Quality (NS item)

Supplying brass gate valve 50 mm (zolloto-make,UNIK,Bajaj,raghav,Jindal).(NS item)

Supplying brass gate valve 65 mm (zolloto-make, UNIK,Bajaj,raghav,Jindal). (NS item)

Supplying Angle cock 15mm of Ess Ess / jacquar/Hindware/Perryware/Kaba. (NS item)

Supplying P-Trap of Finolex,Diplast ,UNIk (ISI 1st Quality) (NS item)

Supplying Brass Curtain Latto. (NS item)

Supplying Curtain rings (NS item)

Supplying of Double action door floor spring ISI mark of Rajdoot. Godrej/Classic/shubham/swell/Vectus/ visko/Klazovyn/Hardweel (NS item)

Supplying seat cover nut PVC complete set (NS item)

Supplying Mortise Lock Knob Type of approved brand. (NS item)

Supplying GI Hex Nipple ½” to 2” of Unik,Jindal,TATA,Prakash,Surya (NS item)

Supplying GI Hex Nipple 2” to 4” of of Unik,Jindal,TATA,Prakash,Surya (NS item)

Supplying GI Elbow ½” to 2” of Unik,Jindal,TATA,Prakash,Surya (NS item)

Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design. (NS item)

Supplying of Anti-termite liquid (Terminator) (NS item)

Supplying Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles of ISI make/Approved brand. (DSR 0413)

Supplying Aluminium hasps and staples (safety type) 150 mm (DSR 0431)

Supplying Brass stop-cock 20 mm dia of ISI mark. (DSR 1343)

Supplying Hydraulic door closer with necessary accessories and screws complete of Rajdoot. Godrej/Classic/shubham/swell/Vectus/Dorzen/Klazovyn/Hardweel (ISI Ist quality) (DSR 1456)

Supplying Anodised Aluminium hanging type door stopper (DSR 2459 )

Supplying Coloured (other than black) solid P.V.C. seat cover in European W.C. pan of Cera/Perryware/Hindware. (DSR 7107)

Supplying G.I. Union 15 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1641)

Supplying G.I. Union 20 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1642)

Supplying G.I. Union 25 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1643)

Supplying G.I. Union 32 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1644)

Supplying G.I. Union 40 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1645)

Supplying G.I. Union 50 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1646)

Supplying G.I. Union 65 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1647)

Supplying G.I. Union 80 mm nominal bore of Unik,Jindal,TATA,Prakash,Surya (DSR-1648)

Supplying G.I. pipes 15 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1545)

Supplying G.I. pipes 20 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1546)

Supplying G.I. pipes 25 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1547)

Supplying G.I. pipes 32 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1548)

Supplying G.I. pipes 40 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1549)

Supplying G.I. pipes 50 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 15450)

Supplying G.I. pipes 65 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1551)

Supplying G.I. pipes 80 mm dia of Unik,Jindal,TATA,Prakash,Surya (DSR 1552)

Supplying Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia. of approved brand (DSR 1879)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia (DSR 8636)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia (DSR 8637)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia (DSR 8638)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia (DSR 8639)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia (DSR 8640)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia(DSR 8641)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 mm inner dia (DSR 8642)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia (DSR 8643)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia (DSR 8644)

Supplying Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia (DSR 8645)

Supplying Brass single acting spring hinges 150 mm of ISI make. (DSR 0389)

Supplying Brass single acting spring hinges 125 mm of ISI make. (DSR 0390)

Supplying Brass single acting spring hinges 100 mm of ISI make. (DSR 0391)

Supplying Brass double acting spring hinges 150 mm of ISI make. (DSR 0392)

Supplying Brass double acting spring hinges 125 mm of ISI make. ( DSR 0393)

Supplying Brass double acting spring hinges 100 mm of ISI make. ( DSR 0394)

Supplying brass screws 25mm to 50 mm (DSR 0449)

Supplying Concrete Curing compound of approved brand and as per direction of Er-in-charge. (DSR 0349)

Supplying Waste Coupling of required size for kitchen sink.(DSR 7492)

Supplying C.P. brass toilet paper holder of standard size. (DSR 1889)

Supplying Bolts and nuts 16 mm-20mm dia 60 mm-80mm long. (DSR 1958)

Supplying C.I. grating 100x100 mm (DSR 1364)

Supplying C.I. grating 150x150 mm (DSR 1366)

Supplying C.I. grating 180x180 mm (DSR 1367)

Supplying Brass butt hinges (light/ordinary type) : 125x70x4 mm of ISI make. (DSR 0378)

Supplying Brass butt hinges (light/ordinary type) : 100x70x4 mm of ISI make (DSR 0379)

Supplying Brass butt hinges (light/ordinary type) : 75x40x2.5 mm of ISI make (DSR 0380)

Supplying Brass butt hinges (light/ordinary type) : 50x40x2.5 mm of ISI make (DSR 0381)

Supplying brass curtain rod 20 mm dia 1.25 mm thick. (DSR 0444)

Supplying Brass curtain rod 25 mm dia 1.25 mm thick. (DSR 0445)

Supplying Brass brackets (curtain rods) 20 mm each. (DSR 0446)

Filling of pond ash including loading, unloading, carriage of materials and dressing work within a lead of 4 KM. (NS item)

Earth filling including earthwork excavation, loading, unloading, carriage of materials, dressing of work within a lead of 4 KM.(NS item)

Cement Concrete 1:6:12 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level. (HSR 10.51)

Cement Concrete 1:3:6 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level.(HSR 10.58)

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in first storey up to 4 meters above plinth level. (HSR 10.59)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work, but excluding steel-reinforcement centring and shuttering in first storey up to 4 meters above plinth level.(HSR 10.80)

Laying dry brick bats. (HSR 10.116)

Marble stone flooring 20 mm to 25 mm thick slab including matching grains of marble laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing ( using marble stone slab of size more than 0.38 sqm each) (iii) makrana Doongri Adanga veined and Makrana chak doongri veined. (HSR-14.49 a ii)

Kotah stone flooring 34 mm to 40 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.(HSR 14.62)

Providing & fixing vitrified tiles of size 600x 600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles of 1st quality of reputed manufacturer like NITCO, Kazaria, Somani, Orient, Johnsons,RAK etc. (HSR 14.89)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 of approved make in all colour, shades including pointing in white cement with pigment of matching shade complete a) Size of ceramic glazed tiles 200x300mm (HSR-14.92a)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 of approved make in all colour, shades including pointing in white cement with pigment of matching shade complete b) Size of ceramic glazed tiles 300 x 450mm (HSR-14.92b)

Providing & fixing ceramic tiles/ anti-skid tiles of size 400x400mm (1st Quality) of reputed manufacturer like NITCO, Kazaria, Somani, Orient, Johnsons & RAK etc. (HSR 14.91)

15mm thick Cement Plaster 1:6 on the rough side of single or half brick wall. (HSR 15.10)

Wrought iron and mild steel (using angles, flats, square bars, tee, plates, sheet and channels) ladders grills, gratting frames, windows guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc. including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Cold twisted deformed (ribbed/ or steel) bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. (HSR 18.22)

Providing & fixing HDPE water storage tank of sintex, Diplast, O.K. Supreme make with covers /Lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position ,making connections with inlet and outlet pipes ,providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connection in tanks complete in all respect to the satisfaction to the Engineer-in-charge(500 Litre capacity) (HSR 30.119)

Providing & fixing HDPE water storage tank of sintex, Diplast, O.K. Supreme make with covers /Lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position ,making connections with inlet and outlet pipes ,providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connection in tanks complete in all respect to the satisfaction to the Engineer-in-charge(1000 Litre capacity). (HSR 30.119)

Providing & fixing HDPE water storage tank of sintex, Diplast, O.K. Supreme make with covers /Lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position ,making connections with inlet and outlet pipes ,providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connection in tanks complete in all respect to the satisfaction to the Engineer-in-charge(2000 Litre capacity). (HSR 30.119)

Painting new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. A) Hindi (matras, commas and the like not to be measured or paid for, half letters shall be treated as half). (HSR 16.66 (a))

Painting new letters and figures of any shade with synthetic enamel paint black or any other approved co lour to give an even shade.(i) English and Roman (Hyphons and the like not to be measured and paid for). (HSR 16.66 (b i)

Painting new letters and figures of any shade with synthetic enamel paint black or any other approved co lour to give an even shade.c) border & arrows upto 6 cm in width. (HSR 16.66 (c))

Providing & laying 80 mm thick interlocking paver block (ISI mark) of all shapes and colours in design mix cement M-35 over a bed of 30 mm thick fine sand & filling the joints complete in all respect. (HSR 10.159)

Providing and fixing IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawl slugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) 25mm dia, C. P Brass adjustable. (HSR 30.68 (a) (ii))

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etc. (a) With C.P brass brackets and guard rail (i)530 mm x 125 mm. (HSR 30.70 (a) (ii))

Factory-manufactured wire gauze door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc, (non-coniferous timber other teak, conforming to I.S. specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide local rail 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fitting other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide) 35 mm thick. (HSR 17.92 (ii))

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position including iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- 35mm thick. (HSR 17.93 (a) (ii))

Chowkats of commercial hard wood such as hollock, champ, chikrassy, and chaplash etc. (Non-Conferious timber other than teak conforming to I.S. Specification no. 1003 Kiln Seasoned) door windows including iron hold fasts etc. complete fixed in position. (HSR 17.12)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Welding by electric plant including carriage to and from workshop. (HSR 18.36)

Providing and fixing Vitreous china orrisa type W.C. pan of size 530mm to 580 mm of Hindware/Perryware/prayag/Kazaria/Vectus (DSR 1954)

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan of Hindware/Perryware/prayag/Kazaria/Vectus (DSR 17.15)

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete 10 litre (full flush) capacity-white of Hindware/Perryware/Vectus/cera (DSR-17.19.1)

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm Hindware/Perryware/Vectus/cera(DSR-17.25.2)

Providing and fixing Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm of Jindal/Prestige/Parryware. (DSR 7101)

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):150 mm diameter Class I (DSR 18.31.3.1)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (e) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (f) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (g) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (h) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. (For the purpose of measurement the entire treated surface will be measured.) (DSR 22.6)

Providing and fixing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : 80 mm diameter pipe (DSR-18.30.1)

Providing and fixing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : 150 mm diameter pipe (DSR-18.30.4)

Providing & fixing Looking Mirror bevelled type and size will be as per direction of Engineer-in-charge. (NS item)

Providing & fixing SS coated/brass Bib Cock long body/short body 15-20 mm of Hindware, Perryware,Prayag, Pearl,kaba, Jindal (NS item)

Providing & fixing PVC CP Jet in EWC complete set of Hindware, Perryware, Jacquar, Prayag, Pearl, Jindal. (NS item)

Providing & fixing 4mm to 5mm Thick Float Glass plain (NS item)

Cleaning of Septic Tanks. (NS item)

Providing & fixing new Aluminum partition including door/sliding door, glass panes, plywood, tower bolts, handles, door closer, lock etc. as per the direction of Er.-In-Charge. (NS item)

Laying of first class ash brick laid in cement sand mortar 1:4 in in first storey upto 4 metres above plinth level including loading, unloading, stacking, carriage within a lead of 4 KM. (NS item) (Fly ash bricks to be provided by HPGCL)

Providing & fixing of PVC syphon complete set of Hindware, Prayag, Vectus, Jindal, Pearl, classic (NS item)

Supplying and fixing of HDPE water storage tank Cover approved make Sintex, Diplast (ISI 1st Quality), Vectus. (NS item)

Providing and applying of JK White Cement.(NS item)

Providing of poly bags and filling with earth and then placing in position as per direction of Engineer-in-charge. (NS item)

Complete Repair of Aqua guards including changing of plates etc. (NS item)

Changing of filters in aqua guards. (NS item)

Applying Waterproofing Compound of required ratio of cement, sand and dr. fixit on other than roof slab. (NS item)

Repair of Rolling Shutter parts/patti/gate motor/ spring/gear set etc. (NS item)

Providing and fixing Asbestos cement 6 MM sheet of reputed ISI mark. (NS item)

Providing and fixing in position 5mm thick acrylic sheet (NS item)

Providing & Fixing of urinal spreader (NS item)

Providing & Fixing of multi purpose drawer lock. (NS item)

Providing & Fixing stainless steel track runner in drawer. (NS item)

Providing & Fixing of mosquito net over roshandan and windows. (NS item)

Providing & Fixing of fiber sheet 2 mm thick. (NS item)

Providing & Fixing of GI Roofing sheet. (NS item)

Providing & fixing of aluminium rubber gasket seal for windows/gates. (NS item)

Providing & fixing of aluminium beading for windows/gates. (NS item)

Supply and laying at site 53 mm to 22.4 mm size stone aggregate. (NS item)

Providing spendle (Bib cock disc) of Finolex, Ken, Diplast ,Supreme, UNIk. (NS item)

Providing & fixing Bracket wall to wall.(NS item)

Providing & fixing of Filter housing set. (NS item)

Providing sketch of rise & fall of different locations using Levelling instruments such as dumpy level/total station as per direction of Engineer-in-charge. (NS item)

Providing & fixing Brass ball valve ½'' to 1” of Finolex, Ken, Diplast ,Supreme, UNIk ( ISI 1st Quality), Zolloto. (NS item)

Providing and fixing of steel name plate 8" x 18" with support base including writing with radium tape, painting of name as direction by Eng.-In-Charge. (NS item)

Furnishing Lacquer Polish in one coat complete in all respect as per specification & direction of Er-in-Charge in VIP Guest House, RGTPP Colony, Khedar. (NS item)

Replacing of Flat back Urinal size 635x395x420mm cera/parry ware/Jindal/Hindware/Pearl/Vectus. (NS item)

Hiring of Hydraulic excavator (JCB) with fuel and Driver. Note:- a) The said machinery will be hired purely on requirement basis. b) The hiring time will be started only after the entry of machinery inside the RGTPP colony. c) Hire charges include cost of services of operating staff, cost of lubricating oil, diesel/petrol/kerosene oil, other consumable for running the machinery excluding GST.(NS item)

Hiring of Tractor Trolley with tiller, Harrow, Rotovator etc. with fuel and driver. Note:- a) The said machinery will be hired purely on requirement basis. b) The hiring time will be started only after the entry of machinery inside the RGTPP colony. c) Hire charges include cost of services of operating staff, cost of lubricating oil, diesel/petrol/kerosene oil, other consumable for running the machinery excluding GST. (NS item)

Rewinding, Repair, greasing, change of bearing of 5 HP motor. (NS item)

Providing and fixing M-seal (NS item)

Cleaning of overhead water tank having capacity 3 lac ltr. By removing algae, sift and bleaching complete in all respect including cleaning of webcobe and other material inside the overhead water tank including disposal of mud as per direction of Er-in-Charge at RGTPP Colony, Khedar(NS item)

Shiv Construction Co.

M/S SHIVA ENTERPRISES

RAJESH KUMAR TRANSPORTER

TANUJ AGARWAL CONTRACTOR

M/s Liak Ahmed