Completion of Balance work for Existing Pump House of LIS Goripora (part A)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out excavated earth and disposal of surplus excavated earth as directed

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc in layers not exceeding 20 cm in depth, conolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing and fixing G.I Pipes complete with G.I fittings excluding trenches and refilling etc ( External work ) 20 mm dia nominal bore (Light)

Providing and fixing 3 layers PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stablized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge. Internal work concealed fixing the pipe with clamps at 1:00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 20mm OD (SDR-7.4)

Providing and fixing ball valve (brass) of approved quality, High or low Pressure, with plastic floats complete (2 mm nominal bore)

Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc complete (new work) 15 mm nominal size)

Providing and fixing PPR Unions PPR Union 20 mm

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

Providing and fixing 15 mm nomnal bore C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931

Providing and fixing 15 mm bore of standard back type CP brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length, 15 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with concerned fitting arrangements, weighing not less than 106 grams

Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour (450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm weighoing not less than 170 grams

Providing and fixing PTMT Shelf 440 mm long 124 mm width and 36 mm height of approved quality and colour weigthng not less than 300 grams

Providing and fixing P.V.C waste pipe for sink or wash basin including making all connections excluding cost of fittings complete : 32 mm dia

Providing and fixing water closet squatting pan (Indian type W.C Pan) with 100 mm sand coast Iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231/with all fittings and fixtures complete, including cutting and making good the walls and floor wherever required; White vitreous China Orrisa pattern W.C pan of Size 580 x 440 mm with integral type of foot rests

Providing and fixing washbasin with C.I brackets, 15 mm C.P brass pillars taps 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever required white viterous china washbasin size 630 x 450 mm with a pair of 15 mm C.P brass pillar traps

Providing and fixing stainless A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting and fittings and brackets cutting and making good the walls wherever required 610 x 510 mm bowl dept 200 mm

Providing and placing on terrace (at all floor levels) polyethyele water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing of Jaquar Elena ELM-WHT 025 storage water geyser having capacity of 25 liters and made up of ABS body material ISI marked including all carriages.

Providing and fixing of PVC Pipes (100 mm prince type_B)

Providing and fixing of PVC Pipes (100 mm Type _ B) Floor Trap

B)P Trap

B)Fitting (Collor, bends, tees etc)

Providing and fixing of detrachable septic chamber of HDPE make with sluice and locking arrangement including fitting charges and installation setup complete

Providing and fixing Ist Quality ceramic galzed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of appvoed make in all colours, shads execpt burgundy, bottle green, black of any size as approved by Engineer in charge, in Skirting risers of steps and deadoes over 12 mm thick bed of cement mortor 1:3 (1 cement : 3 Coarse sand) and jointing with grey cement slury @ 3.3kg/ sqm incl. pointing in white cement mixed with pigment of matching shade complete

Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness cement and matching pigment etc. complete in colours such as White, Ivory, Grey, Fume Red Brown

Providing and laying gang saw cut of specified thickness, mirror polished pre-moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 ( 1 Cement : 4 Coarse Sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc, complete as per directions of Engineer in charge 18 mm thick

Providing edge moulding to 18 mm/ 16 thick marble stone counters, Vanities etc including machine polishing to edge to give high gloss finish etc, complete as per design apprved by Engineer in charge Marble work

Extra for providing opening of required size and shape for wash basin/kitchen sink in kitchen platform, vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc includig including moulding, rubbing and polishing of cut edges etc compete

Add provision for supply and fittings of electrification of pump house of lightening puprpose only

Supply and fixing of thermal lining, matting and furishing to operators room

Supply and providing of electro digital title board for the scheme complete job with clamps/stiffeners

Supply and fixing and erecting scheme legend/index features with sign board

Closing of slots/ bearing blocks etc.

M/S MOHAMMAD IRFAN KHAN