Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹17.7 L+₹1.3 L (7.62%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹17.9 L+₹1.4 L (8.37%)Rejected-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹18.0 L+₹1.5 L (9.08%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹18.5 L+₹2.0 L (12.0%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹23.8 L
EMD Value
₹47,640
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West)
Kabir Road Jalandhar Cantt
CERTAIN REPAIR/MAINT TO MD/FAFA ACCN IN AREA A-2 OF AGE B/R-I UNDER GE (WEST) JRC
2023_MES_606413_1
GE/JAL(W)-38/2023-24
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹47,640
Yes
26 Aug 2023
28 Jun 2023
9 Aug 2023
28 Jun 2023
2 Aug 2023
21 Jul 2023
Amount
Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete .
Demolition of brick or stone masonary built in cement mortar complete
Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc
M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6.
M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spd and directed
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, hard standing,Manhole, drain etc.
M&L for 15mm thick rendering in 1:3 CM with using @ 3% WPC as in sunken portion complete all as directed.
Supply only integral water proofing compound.
M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per sqm mtr including cleaning surfaces.
M&L APP based polymeric membrane minimum weight not less than 3.0kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) land on primed surface by forced application( sealed by flame) with over lap of 15 cm complete all as specified and directed complete all as spd and directed.
M & L 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement.
M& L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor.
Cutting holes into or through brick walls built, in cement mortar Superficial area n.exc 150 sq. cm upto 23cm of depth of wall for repairing of existing spout pipe,
M & L for 50mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.(Measured for cutting holes shall be paid in concerned sch item)
M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3 metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls.
M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work.
M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement.
M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.
M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.
Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises
M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4.
M&L Non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in CM 1:6.
Demolition of re-inforced cement concrete of any description and in any position not otherwise specifically provided for
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete
M&L for Reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L mild steel deformed bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips confomring to Gd I IS-432
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any morter.
M&L for green marble (of any type)work 18 to 20 mm thick (table rubbed and polished) as in steps, cooking plat forms and the like,in cement mortar1 : 4 including painting in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of green marble etc, incl roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and 15mm thich screed bed in CM 1:6.
M&L Chequered cement concrete tiles 20cmx20cmx25mm thick as in path etc. set and jointed with grey cement and pigments as in floors and over and incl screed bed or bedding layer of mortar 15mm thick laying floor finished in CM 1:6 complete all as specified and directed
Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc
Taking down chowkhats or frames with shutters (without taking of shutter from the frame)of any description alongwith fittings n.exc 1.5 Sqm each
Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5 Sqm n.exc 4 Sqm each
Taking down shutters any description exc 1 Sqm but n.exc 2 Sqm each and all as specified and directed
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 125 x60mm
M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articles
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required built in cement motar in brick wall depth of embedded portion of holdfast exc half brick but n exc one brick
S&F 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers.
S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both side.
Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins,etc. under 40 sq. cm in section in any position
S&F Second class hard-wood in scantlings clean swan for holding of shelf to Cup board/ward robe etc as directed by Engr in Charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
S&F 25mm Boarding, fixed with nails in any situation Planed one side with butt joints in repair to wardrobe,Cup board as directed by Engr in Charge.
Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.
Steel window/ventilator 1.25 mm thick Box type ERW hollow P section of size 60mm x 25 mm single rebated comprises skelton shutter ERW Sec 50 MM x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T-section 20 mm x 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1, including shop coat primer and following fittings welded to shutters:-i) Hold fasts 150 mm long,12mm x 3mm made to shape -04 No’s, (ii) Handle of Z sec 20mm x 25mm , 100mm long per leaf -1 No’s (iii) MS tower bolt 150 mm long per leaf -2 No’s (iv) Z sec 20mm x 25 mm , 100 mm long stopper per leaf -1 No (v) Cleat 55 mm long of hollow square 15mm x 20mm x 63 mm welded to hinges per leaf -01 No (vi) MS pintal hinges of size 75mm x 12 mm per leaf -02 Nos (vii) Fabrication and fixing arrangement complete.
All as per srl item No 47 above here-in-before but but glazed shutter.
S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe-290 Gde - 165.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avg with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.
S&F Butt hinges, medium weight cold rolled mild steel 100 mm size ISI marked.
S & F for Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21
S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified
S&F Extruded aluminium alloy handles fabricated type anodised 150mm size
S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified.
S & F for 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws
S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.
Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.
Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in stone walls
S&F 15mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.
Refixing 15mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)
S&F 20 mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed.
Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)
Dismantiling of water tanks of capacity exc 250 & n exc 500 ltrs incl all necessary fittings complete.
S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I
S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair
S&F ball float valve PTMT with epoxy coated aluminimum rod for 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe.
S&F in repair 15mm dia Bib taps cast copper alloy with fancy type chromium plated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule complete all as specified and directed.
S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe as specified and fixed in repairs.
S&F 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified .
S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste cuppling complete all as specifed and directed.
S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes
S&F in repair 15mm brass CP bath mixer for mixing hot & cold water screwed down for iron pipe and fixed
S&F in repair 15mm brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed
S&F in replacement CP Jet for EWC including flexible pipe complete all as specified.
S&F in repair Vitreous China Water closet (Squatting pattern) "Orissa Pattern" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) complete.
S&F Vitreous China wash down Water closet pan (pedestal pattern) "with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairs completee
S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairs
S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
Dismantling of cast iron or reinforced concrete drain pipes of size 100mm dia, jointed in cement mortar and taking out of trenches, if required.
M&L 75mm PVC (SWR) floor trap , plain with CP grating including jointing with solvent cement complete all as spd and directed
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls
S&F110mm PVC (SWR) bends
S&F75 mm PVC (SWR) bends
S&F brass chromium plated shower rose 125mm size complete all as spd and directed.
Supply in fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying white wash of two coats as in ceiling incl preparation newly plastered surfaces as specified and directed.
M & L for applying white wash of one coats as in ceiling incl preparation old painted surfaces as specified and directed.
Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper complete all as specified.
Material and labour for preparation of old painted surfaces on walls and applying one coats of oil distemper complete all as specified.
Material and labour for preparation of new plastered surfaces on walls and applying two coats of cement base paint complete all as specified.
Material and labour for preparation of old painted surfaces on walls and applying one coats of cement base paint complete all as specified.
AAY KAY ENGINEERS
B.P CONSTRUCTION CO
G S TRADERS
SARASWATI CONSTRUCTION CO
M/S Kuldip Construction Co.
M/S RAJESH CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .