Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.2 L+₹1,013.57 (0.11%)Rejected-Finance 5 3 1 GAGAN SARKAR ROAD KOLKATA 700 010 | KOLKATA | KOLKATA | WEST BENGAL | 700010 | L2 | Rejected-Finance L2 | |
| 3 | L3₹9.4 L+₹14,127.57 (1.53%)Rejected-Finance 18 DHRUBESH CHATTERJEE LANE UTTARPARA HOOGHLY 712258 | UTTARPARA | HOOGHLY | WEST BENGAL | 712258 | L3 | Rejected-Finance L3 | |
| 4 | L4₹9.4 L+₹14,394.54 (1.56%)Rejected-Finance NANAK TOWER 3RD FLOOR SEVOKE ROAD SILIGURI | L4 | Rejected-Finance L4 |
Tender Value
₹9.6 L
EMD Value
₹19,248
Closing Date
21 Dec 2020, 5:00 pmClosed
Executive Engineer
Office of the Executive Engineer, Midnapore Mechanical Division P.H. Engineering Directorate Inda P.H.E. Complex, Kharagpur
Providing and installation of pumping machinery and other electromechanical equipment at P/H No-II, at Gurehara W/S Scheme in connection with 32 PWSS system draught like situation prone blocks of Dist. Paschim Medinipur. Under Master Plan Under MM
2020_PHED_308409_8
WBPHE/EE/MMD/NIeT-10OF2020-21
Open Tender
Electrical Work/ Equipment
Item Wise
120 days
Kharagpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹19,248
25 Jan 2021
10 Dec 2020
24 Dec 2020
11 Dec 2020
21 Dec 2020
11 Dec 2020
PART-A Supply and delivery of following materials at site:- Submersible pumping machinery directly coupled with submersible motor at 400V(±10%), 50(±3%)Hz. Material of Construction :- Pump bowl : Housing : C.I. Pump / Motor shaft : SS-410. Impeller : Bronze/CS/SS/Noryl NRV Size: 50/65/80 mm Starting Method : DOL Speed : 2900 rpm max. Discharge(Q) -16 m3/hr and Head(H) - 62 mtr. (Test certificate, H&Q characterstic curve should be provided at the time of delivery)
80 mm dia uPVC (Standard type) Column pipe with both side threaded and one side socketed, Make – Ashirbad/Aroma/Approved make 3.05 Mtr. Long .
1.5 Mtr. long .
80mm diaTop and bottom adopter (MS)
Pressure gauge, 100 mm cast Al. dial along with DN-15 GI impulse line with valve. (0 – 10 Kg.) Make- H Guru/Febig
M.S. fabricated split type suitable tube well cover as per tube well housing with a necessary clamping arrangement with including holes for column pipe, air pipe and cable entry etc.
Safety device for the above pump set by suitable M.S. cage with clamping arrangement and nylon rope as per required length including supplying nuts, bolts and other necessary materials as per direction of E.I.C.
MS suspension clamp with necessary nuts, bolts & washer etc suitable for 80mm dia column pipe (Size-500 mm x 80 mm x 8 mm each)
16sq.mm. 4 core1.1 KV grade PVC insulated XLPE Ar. AL conductor cable, Make: Gloster/Nicco/Decon.
4 sq.mm. 3 core,1.1KV grade PVC insulated & sheathed copper flat submersible cable. Make:Finolex/Havells.
CI body, moulded rubber lined wafer type Butterfly Valve, DN 80mm, (PN-1.0) as per IS:13095 / BS 5155, PN-1.0 coupled with electric motor ( 1Ph) operated actuator valve Make:IVI/Jupiter/Durga/Kiloskar/CAIR. Actuator make-Rotork/CAIR
80mm dia CIDF Non Return Valve conforming to I.S. : 5312, Part-I (P.N. 1.0), Make:IVI/Upadhyay/jupiter./Cair/Any Approved make
80mm dia CIDF sluice valve (PN-1.0) As per I.S 13095 Make:IVI/Upadhyay/jupiter/Cair/Any Approved make.
80 mm dia medium type MS black Pipes (For Common Delivery header Pump under Sl No-1, along with necessary bends, Tee, specials, fittings viz. flanges, bolts, nuts, gaskets , enlarger, MS Dismenteling joint, for connecting main pipe line etc. including providing MS/Brick/PCC support for laying of pipes & valves as reqd. to make the installation complete in all respect and as per NIT.
G.I fabricated out door type kenopy cable jointing box inside fitted 6 nos 100 Amp rated bus bar and hingage type front door and painted powder coated anticorrosive paint as per IP 55 as per direction
2 mm thick CRCA Sheet steel enclosed cubical tpype indoor floor mounted Auto/Manual 415Vlolt MCC Panel having requred feeders, stater etc. as detailed as per Technical Specification of NIT Make:- PEC Project /RNR / ECS/System control/Any Approved make
Chlorination system with all equipment and accessories as per following specification :-i. 1no. dosing pump of capacity 0-100 lit/hr. max. discharge and 10 Kg/cm². pressure max with Motor 0.5 HP, 3 Ph, 50Hz 415 Volt, 1440rpm TEFC cooling motor, base plate rate adjustment device etc.ii. 100lit HDPE dosing tank for storing of chlorine solution .iii. Necessary GI pipe fittings and HDPE / PVC pipe line for dosing the solution with all accessories as per requirment. Pump Make: Swelore/Positive Pump I/Any Approved make Motor Make- CGL/KEC/ABB/Any approved make
40W LED light fixture having pressure die cast Al. housing pot optical reflector and heat resistant toughened glass cover complete set. M.No-Type HSN Code MRP (INR) BRP409 LED CW 036 MR FG S1 PSU GR or Similar type. (Make Philips/equivalent model)
Internal electrification of pump house wiring with 1.1 KV grade single core PVC insulated stranded Copper wire 2 X 1.5 sq. mm wire in 25 mm PVC casing capping incl. S&F 1 X 14 SWG Copper E.C.C with suitable switch board incl. S&F 5A Piano Key type switch and other necessary materials consisting of 1 nos Fan point, 1nos bucket holder point, 5 Amp 5pin one socket, 2 nos 20watt LED tube set point, Seperate board incl. 16A switch & socket. (Rate is including 1no 9W LED light, 2 nos. 20W LED tube set)
Supply ,delivery and fitting fixing of 63Amp 415 V Four Pole MCCB of Breaking capacity 35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Make – Havells / Standard/Other Approved make
Supply , delivery and fitting fixing of 20/30 protection, pwder coated provision for housing Four pole (4P) MCCB, concealed in wall after cutting the wall & mending good the damages to original finish/ on flat iron frame incl. painting, connection & provision for earthing attachment Standard ( SKB8)
Supply delivery and fitting fixing of 230 volt sweep AC ceiling fan with ball bearing complete with all accessories such as blade, canopy, fork, down rod etc 1200mm dia blade (Make Havelles/Poler/Bajaj)
Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 20 mm. x 3 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work.
PART-B Installation of above Supplyed items vide Sl-(1-16) in part-A including cost of construction of foundation of chlorine machine, Valve support, out door light by the 40 mm dia G.I Arm, fabrication of M.S Structure, grouting, cost of welding, fitting fixing of new valves, and connecting to main delivery line througth underground pipe laying etc including supplying of all necessary metarials viz rubber gasket, nut & bolts, rubber mat of suitaible size & thikness including painting by synthetic enamel paint at part of rising main,valves etc after removing of old paint by scrapping & cleaning to complete the jobs in all respect as per tecnical specification and as per direction of E.I.C
Commissioning the MCC, Chlorine machine along with other electrical equipments to ensure performance of the equipments in running satisfactorily as per direction of E.I.C.
Trial Operation of pumping machinery, through PLC / Automatic panel also operation of Chlorinator etc. including operation of rising main valve if required and guarding of installation by engaging experience personnel for supplying drinking water as per direction of E.I.C.
INDRANI ENTERPRISE
R.N.S.TRADING
MS P P ELECTRICALS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .