Repair and renovation of Sarojini naidu girls hostel civil work

Amount

Removing dry or OBD by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Renewing bars, style of Glazed/wire Gauge/paneled shutters of following sizes including refixing the same, 40mm thick ( Using Second class Deodar wood) including applying a coat of priming coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac) 3” x 11/2”

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched 35 mm thick including ISI marked anodised aluminium butt hinges with necessary screws.commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including applying a coat of priming coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac)

Applying white cement based Putty of average thickness 1mm of approved brand & manufacture on wall surface to give an even finish

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (Two or more coat on new surface).

Kota stone slab flooring over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including edge moulding, rubbing, polishing to give a high gloss finish complete. 25 mm thick

Providing and laying double charged vitrified floor tiles in 60 * 60 cm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with cement and matching pigments etc complete (Make Johnson/Kajaria/RAK) including roughening the existing floor by way of tucking etc. complete.

Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows & ventilators including providing and fixing hinges/pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket 5mm glass panes/12mm laminated board on both sides, hydraulic door machine where ever required complete job as required. The Spacing of Vertical members not to exceed 4’-0” & section to be used is 104 mm x 44.45 mm

Renewing glass panes, with wooden fillets wherever necessary, Glass panes weighing 10 Kg/Sqm

Painting with Synthetic Enamel paint of approved brand and Manufacture to give an even shade one or more coats on old work.

P/F 8mm to 10mm thick double layered polycarbonated sheet on roof top on existing steel frame work including removing the old / damaged polycarbonated sheet from the existing structure and incl. the cost of nuts, bolts, aluminium profile, rubber gasket, labour etc complete job. Nothing extra shall be paid on account of wastage. All work upto floor V level.

Brothers & Co

RAJ KUMAR SALGOTRA

UPINDER SINGH

M/S RAJ KUMAR CONTRACTOR