SPL REPAIR OF SECURITY LIGHTS AND OTHER ALLIED WKS AT GS VIHAR AND 235 ENGR REGT AT AKHNOOR MIL STN UNDER GE (S) AKHNOOR

Dismantling and taking down of old UG cables any size complete all as specified and directed.

Dismantling and taking down of old street lights any type and capacity complete all as specified and directed.

S&F of steel tubing galvanized light grade of size 50 mm dia with all necessary fitting and laid on wall/ on floor for cable protection including jointing & testing complete all as specified and directed.

Supply and Fix of junction box water proof out door type made out of SMC sintex make of external dimensions 240mm X 130mm X 95mm single door type hinged with locking arrangements front operated with one number MCB 10 Amps capacity for housing single phase and neutral bus bar, including connecting the incoming/out going cables including cable glands SMC coated clamp bolts and fixed to the pole with mild steel flat of size 25mm X 4mm, complete all as specified and as directed.

Supply and fix GI bracket pipe of size 40 mm dia medium grade of 1.75 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including suitable fabricate MS flat iron clamps of 25X6 mm thick -02 Nos suitable for fixing any places with nuts,bolts & washers including grouting on wall etc complete all as specified and directed.

Supplying and fixing PVC conduit of size 20mm medium class ISI marked along with pole as required complete all as specified and as directed by Engineer In Charge.

Supply and fix 3 core multi strand copper conductor PVC insulated cable 2.5 Sqmm1100 volts grade FRLSH connection to junction box to light fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer In Charge.

Supply and fixing LED flood light 100 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engineer In Charge.

Supply, installation, testing and commissioning of factory made powder coated compartmentalized cubicle type External Lighting Fedder Pillar Panel - (Outdoor Type) double door distribution board totally enclosed complete with suitable RCC pedest appropriate size and fabricated from 3.15 mm thick CRCA sheet steel with necessary MS angle iron frame work(50X50X6mm), weather proof, vermin proof, suitable rating copper bus bar chamber for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply complete with gland plates, lifting hooks, ventilating louvers, bus bars, inter connections, earthing terminals, labeling , cable alley suitable for termination of cables including supply and fixing of following switchgear and accessories in the panel complete as required size conforming specification as per IS 5039. The panel should be CPRI approved and having IP 56 ingress protection including necessary foundation for mounting all as specified and directed by Enginer in charge Incoming :- (a) MCCB 4 pole 63 Amp 25 KA 415V ( Incoming)-01 No Outgoing :- (a) MCCB 4 pole 40 Amp 25 KA 415V ( Incoming)-02 No (b) LED indication lamp -01 (R Y B, set of three) (c) Multi function meter with KWH, voltage, Amp, frequency meter as per incoming load with CTs of suitable rating. Make AE/L&T/Havells (d) Aluminium busbar TPN 100 Amps, 415 volts, 50 Hz AC Supply-01 Set (e) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, glands etc complete are included in quoted rates. Note :- (i) The quoted rate shall include minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694. (iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE. (iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (v) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate.