Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
7 Feb 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
Kum Divya
Construction of CC Road and Both Side CC Drain in Hulagur-Yaraguppi MDR from km 10.65 to 12.05 (Hireharakuni Village Limit) in Kundgol Taluka of Dharwad Dist.
PWD/2023-24/RD/WORK_INDENT5828
PWD/2023-24/RD/WORK_INDENT5828
Open
Roads
Two Tender Document System(Two Cover)
PWD Division Office Dharwada
7 documents required · 7 mandatory
Executed in any one year the following minimum quantities of work (Earthwork 498.00 cum ,Concrete including PCC/RCC 1360.84 cum)
3.2 B) To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2018-19, 2019-20 2020-21, 2021-22 & 2022-23 Satisfactorily completed as prime contractor, at least one similar work such as Construction of CC road and CC drain of value not less than 74.66
PWD Registration Certificate
3.3) Each Tenderer should further demonstrate: (a) As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO FD/AE 263/EXP12-2022 dtd 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth specification. The following is the list of Plant & Equipment to be deployed on project 1) Excavator like JCB/Hitachi (2) Tipper (3) Road Roller (Vibrator) (4) Hot Mix Plant (5) Paver Finisher (6) Vehicle mounted mechanical sprayer (7) Pug Mill
Banker Details for reference
Liquid assets and/or availability of credit facilities of not less than Rs.74.66 Lakhs. (Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. LOC in the prescribed Format-2 given in bid document.
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. ,2018-19, 2019-20 2020-21 2021-22 2022-23 a) Achieved in at least two financial years an minimum annual financial turnover (in all classes of civil engineering construction works only) of Rs.298.62 Lakhs.
P&L statements, Balance sheet, ITR copies / Auditors reports for the last 05 years i.e from 2018-19 to 2022-23
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Proposed methodology and Program of construction, backed with equipment, planning and deployment, duly supported with Broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones.
Principal Place of Business
Forms and Formats
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
₹3,740
₹2.2 L
1 Feb 2024
1 Feb 2024
8 Feb 2024
6 Feb 2024
26 Jan 2024
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead.
Preparation and Surface Treatment of Formation Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimmi...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Pavement Quality Concrete using paver - M40: Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, course and fine...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
2.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
2.4 Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m heigh...
Additionalities for Formwork, Centering & Scaffolding 35% of Foundation, Sub structure of Cross drainages Works
FORM WORK for Item no. 21 (As per Appendix I, Sl no.2 Foundation, Sub structure of Cross...
Supplying, Fitting and Placing TMT Fe 550/ 550 D steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4 5828.doc
Tender Document • 0.67 MB
eproc_formats(new).xls
Others - Forms & Formats • 0.12 MB
road specification.pdf
Others - Road Scpecification • 1.52 MB
government notification BC LOC letter to be issued by the Bank.pdf
Others - LOC • 1.73 MB
concrete specification.pdf
Others - Specification • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .