Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹12.8 L+₹51,043.87 (4.15%)Rejected-Finance 16 BAITHAKKHANA ROAD 16 BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH KOLKATA | L2 | Rejected-Finance DUE TO HIGHER RATE | |
| 3 | L3₹13.1 L+₹82,340.83 (6.69%)Rejected-Finance A T T MILL COMPOUND BLOCK TINALI MARGHERITA MARGHERITA TINSUKIA ASSAM 786181 | TINSUKIA | ASSAM | 786181 | L3 | Rejected-Finance DUE TO HIGHER RATE | |
| 4 | L4₹13.7 L+₹1.4 L (11.1%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L4 | Rejected-Finance DUE TO HIGHER RATE | |
| 5 | L5₹15.5 L+₹3.2 L (25.8%)Rejected-Finance 1389 RADHETENAMENT SOCIETY SARDAR ROAD SURENDRANAGAR SURENDRA NAGAR GUJARAT 363001 | SURENDRANAGAR | GUJARAT | 363001 | L5 | Rejected-Finance DUE TO HIGHER RATE |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
30 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
REPAIR/MAINT OF WATER SUPPLY DISTRIBUTION NETWORK FOR ZONE-1, II AND III AT LEKHAPANI MIL STN UNDER GE LEKHAPANI
2022_MES_526089_3
8659/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (ii)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹24,000
Yes
12 Oct 2022
16 Sept 2022
3 Oct 2022
16 Sept 2022
30 Sept 2022
23 Sept 2022
Amount
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation, etc. or for taking out/laying of CI/GI pipes etc or for shafts,wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and directed.
Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Taking down cast Iron /DI water pipe line 80mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints for recovering lead including stacking of serviceable pipes aside complete all as specified and as directed.
All as per Item No.04 above,but 100 mm bore complete all as specified and as directed.
All as per Item No.04 above,but 150 mm bore complete all as specified and as directed.
All as per Item No.04 above,but 250 mm bore complete all as specified and as directed.
Relaying of old serviceable cast iron pipe 80 mm bore obtained from serial Item No 4 here in before with spigot and socket ends in new or old position in any length, laid in trenches after cleaning of inner surface and applying with two coats of black bituminous paint (sutiable for drinking water purpose) including testing complete all as specified and directed.
All as per item No 8 here in before but for 100 mm bore obtained from serial Item No. 5 complete all as specified and as directed.
All as per item No 8 here in before but for 150 mm bore obtained from serial Item No. 6 complete all as specified and as directed.
All as per item No 8 here in before but for 250 mm bore obtained from serial Item No. 7 complete all as specified and as directed.
M&L Cast iron pipes of 80mm bore with spigot and socket ends, centrifugally cast, class LA, in any length, laid in trenches including testing complete all specified and as directed
All as per item No 12 above, but for 100 mm bore complete all as specified and as directed.
All as per item No 12 above, but for 150 mm bore complete all as specified and as directed.
All as per item No 12 above, but for 250 mm bore complete all as specified and as directed.
M & L for cast iron fittings upto 150mm bore of spigot and socketed CI pipes, such as bends (any type, radius and angle), Tappers any type ( striaght, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) Collars, Caps and plugs, connecting piece etc complete all as specified and as directed.
M & L for cast iron fittings from 200mm to 300mm bore of spigot and socketed CI pipes, such as bends (any type, radius and angle), Tappers any type ( striaght, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) Collars, Caps and plugs, connecting piece etc complete all as specified and as directed.
M&L Run lead joints for 80 mm bore cast iron pipes and fittings etc., (Spigot and Sockets) including testing complete all as specified and as directed.
All as per item No 18 above, but for 100 mm bore complete all as specified and as directed.
All as per item No 18 above, but for 150 mm bore complete all as specified and as directed.
All as per item No 18 above, but for 250 mm bore complete all as specified and as directed.
Taking out from trenches or taking down from wall GI steel tubing and connections, 15 mm bore, setting aside and cleaning the serviceable pipe for re-laying/ re-fixing or removal of unserviceable pipe from site of work complete all as directed.
All as per item No 22 above, but for 20 mm bore complete all as specified and as directed.
All as per item No 22 above, but for 25 mm bore complete all as specified and as directed.
All as per item No 22 above, but for 40 mm to 50 mm bore complete all as specified and as directed.
All as per item No 22 above, but for 80 mm bore complete all as specified and as directed.
All as per item No 22 above, but for 100 mm bore complete all as specified and as directed.
Relaying of old serviceable GI pipe 15 mm bore obtained from serial Item No 22 here in before as in new or old position in any length, laid in trenches after cleaning of inner surface and including testing complete all as specified and directed.
All as per item No. 28 above, but 20 mm bore obtained from serial Item No. 23 here in before complete all as specified and directed.
All as per item No 28 above, but 25 mm bore obtained from serial Item No. 24 here in before complete all as specified and directed.
All as per item No 28 above, but 40 mm bore obtained from serial Item No. 25 here in before complete all as specified and directed.
All as per item No 28 above, but 50 mm bore obtained from serial Item No. 25 here in before complete all as specified and directed.
All as per item No 28 above, but 80 mm bore obtained from serial Item No. 26 here in before complete all as specified and directed.
All as per item No 28 above, but 80 mm bore obtained from serial Item No. 27 here in before complete all as specified and directed.
S&F 15 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 20 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 25 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 40 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 50 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 80 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 100 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F 20mm bore, ball valves highpressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) as fixed in repairs complete all as specified and directed.
All as per Item No 42.00 above but size 25 mm complete all as specified and directed.
Supply, install, jointing & testing CI body sluice valve 100 mm bore class PN-1.6, ISI marked (as per IS-14846 of 2000) heavy duty with flanged ends with high tensile stainless steel spindle, iron hand wheel and fixing with nuts, bolts, washers and rubber gasketsheet for packing including taking out existing us sluice valve fixed at any position all as specified and directed by Engr-in-Charge.
Supply, install, jointing & testing CI body sluice valve 80 mm bore class PN-1.6, ISI marked (as per IS-14846 of 2000) heavy duty with flanged ends with high tensile stainless steel spindle, iron hand wheel and fixing with nuts, bolts, washers and rubber gasketsheet for packing including taking out existing us sluice valve fixed at any position all as specified and directed by Engr-in-Charge.
M & L Brick masonry valve chamber of internal size 90cm x90cm x90cm by using brick masonry with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata and foundation with 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) including 20 mm thick PCC(1:2:4) type B1(using 20 mm graded stone aggregate) as in coping on top of walls and plastering the internal and external surfaces with 10 mm thick CM ( 1:4) and providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coat of black bituminous paint over one coat of red oxide primer complete all as directed.
M & L Brick masonry valve chamber of internal size 60cm x60cm x80cm by using brick masonry with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata and foundation with 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) including 20 mm thick PCC(1:2:4) type B1(using 20 mm graded stone aggregate) as in coping on top of walls and plastering the internal and external surfaces with 10 mm thick CM ( 1:4) and providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coat of black bituminous paint over one coat of red oxide primer complete all as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 15mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 20mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 25mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 40mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 50mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
Material & labour for repair the any type leakage from joint,bend and Tee in 25/20 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. (Excavation, Returning filling and Removal of soil will be measured and paid under respective Items)
Material & labour for repair the any type leakage from joint,bend, socket, reducer and Tee in 40 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. (Excavation, Returning filling and Removal of soil will be measured and paid under respective Items)
Material & labour for repair the any type leakage from joint,bend, socket, reducer and Tee in 50 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. (Excavation, Returning filling and Removal of soil will be measured and paid under respective Items)
Material & labour for repair the any type leakage from joint,bend, socket, reducer and Tee in 80 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. (Excavation, Returning filling and Removal of soil will be measured and paid under respective Items)
Cutting of existing cast iron/DI pipes of 250 mm bore in any position for insertion and fitting of new Tee, Coller, Tail pieces etc for taking out connections, branch connections complete all as specified and directed Note :- (a) Excavation/earth work shall be measured and paid seperately under respective item of schedule. (b) Cast iron fittings shall be measured and paid seperately as supply only under respective item of the schedule
All as per Item No.57 above but cast iron/DI pipes 150 mm bore complete all as specified and directed.
All as per Item No.57 above but cast iron/DI pipes 100 mm bore complete all as specified and directed.
Supply, laying, jointing and testing of Ductile iron water mains 80 mm bore Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed.
Supply, laying, jointing and testing of Ductile iron water mains 150 mm bore Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed.
Supply, laying, jointing and testing of Ductile iron water mains 100 mm bore Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed.
Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80mm to 200mm dia including taking out Unserviceable complete all as specified and directed .
M & L for taking out sluice valve, refacing, remetaling,regrinding and refixing of 250 mm bore dia, complete all as specified and directed.
M & L for taking out sluice valve, refacing, remetaling,regrinding and refixing of 150 mm bore dia, complete all as specified and directed.
M & L for taking out sluice valve, refacing, remetaling,regrinding and refixing of 100 mm bore dia, complete all as specified and directed.
M&L for boring drilling, threading and tapping on existing cast iron mains for size 80 mm to 300 mm bore for connecting 15/20/25/40/50/80 mm bore pipe by fixing on clamp made out of MS flat iron of size 40 x 3 mm made to required shape & size with GI socket duly welded, nut & bolts etc. complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles and remove debris beyond the premises complete all as specified and directed.
M & L for brick work with subclass “B” Old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Boring holes of size 150 mm to 50 mm up to depth 1.0 mtr by using trenchless technology for crossing the road to pass the DI/GI piper complete all as specified and directed.
M&L PCC (1:4:8) Type D-2 (using 40 mm nominal size graded crushed stone aggregate) as in sub base for laying tiles, pavings etc complete all as specified and as directed.
Supply only ferric Alum crystal as per IS : 299 (Q3)grade 1 in solid form packing material should be of Polythene lined HDPE Bags and packing size of 50 Kgs complete all as directed by Eng-in-charge.
Supply only Polyaluminium chloride as per IS : 15573 packing material should be of Polythene lined HDPE Bags complete all as directed by Eng-in-charge
Supply only ferric Alum brick as per IS : 299 (Q3) suitable for drinking water purification complete all as directed by Engr-in Charge
Supply only soda ash lime suitable for drinking water purification complete all as directed by Engr-in Charge
Supply only chemical for drinking water treatment , calcium based granular high strength disinfectant chlorinating chemical having 65 % to 70 % chlorine content in granular form in a 45kg drum. The Chemical should be of new batch number not more than 6 month old manufactured. Brand should be from any manufacturer aproved by E-in-c's branch. Note for Item Nos 72 to 76: Any one of the make from E-in-C approved list shall be approved by Eng-in-charge.
M/s HALDER ENTERPRISE
M/S. MATA VAISHNO DEVI ENTERPRISE
M/s PRABIR ENTERPRISE
M/S S. P. ENTERPRISE
M/S K S Enterprise
NChetia and Sons Trading
FREEZCON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .