Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 CrAccepted-AOC | ₹12.6 Cr | L1 | Accepted-AOC AOC |
| 2 | L1₹12.6 CrRejected-AOC NORTH LAKHIMPUR LAKHIMPUR | ₹12.6 Cr | L1 | Rejected-AOC NOT QUALIFIED FOR AOC |
Tender Value
₹14.0 Cr
EMD Value
₹28.0 L
Closing Date
23 Dec 2021, 2:00 pmClosed
Addl. Chief Engineer, UAZ, W. R. Deptt. Dibrugarh
O/o the Addl. Chief Engineer, UAZ, W. R. Deptt. Dibrugarh
Protection work at downstream of Dhunagurighat from Hamara-Bahgarah to Chenimoraghat on right bank of river Subansiri.
2021_DoWR_23558_1
NLP/SOPD/DHUNAGURI/2021-22/1
Open Tender
Civil Works
180 days
North Lakhimpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹20,000
₹28.0 L
Yes
31 Mar 2022
2 Dec 2021
24 Dec 2021
2 Dec 2021
23 Dec 2021
18 Dec 2021
Amount
Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto1000 m as per Technical Specification Clause 301.5 i) Private Land
Haulage excluding Loading & Unloading. Haulage of materials by tipper excluding cost of loading, unloading and stacking Case-I : Surfaced Road (Total distance = 2km)
Turfing with Sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per Technical Specification Clause 309.
Earthwork in bank trimming to the designed section /slope including removing the soils at a safe distance, complete as directed.
Supply of Geo-textile bags of Type-B (Size 2.00m x 1.50m), inner dimension made of composite layers of geo-textile as per specifications below : Woven Geo-textile for the outer cover. The woven geo textile is woven with UV resistant slit film tape fibre with MAVR values of the following properties. Geo-textile used to manufacture geotextile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Weight (ISO-9864/ASTMD 5261) ≥250 Gms/Sqm. Tensile strength(MD) ( ASTMD 4595) ≥35 KN/m Tensile strength(CD) ( ASTMD 4595) ≥35 KN/m Tensile Elongation ( ASTMD 4595) ≥5% & ≤30% Grab Elongation ( ASTMD 4632) ≥5% & ≤30% Tensile strength ( ASTMD 4632) = 1.5 KN UV resistance( ASTMD 4355) = 70%/500 hrs Non woven Geo-textile for the inner layer It is needle punched non woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm. Tensile strength(MD) ( ASTMD 4595) ≥12 KN/m Tensile strength(CD) ( ASTMD 4595) ≥12 KN/m Tensile Elongation ( ASTMD 4595) ≥5% & ≤30% Grab Elongation ( ASTMD 4632) ≥5% & ≤30% Tensile strength ( ASTMD 4632) = 1.5 KN UV resistance( ASTMD 4355) = 70%/500 hrs (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).FOR GUWAHATI
Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum volume 0.612 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the departent free of cost) Without boat
Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum volume 0.612 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the departent free of cost) With boat
Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner dimension made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre having thickness not less than 3.00 mm with minimum properties as (i) Tensile strength (CD) ≥ 24 KN/m (ii) Tensile strength (MD) ≥ 22 KN/m (iii) Mass ≥ 400.00 Gm/m ² (iv) CBR Puncture strength ≥ 4100 N/m2 (v) Elongation @ break (Warp) ≥ 54% (vi) Elongation @ break (Weft)≥ 52% (vii) Abrasion ≥ 70 % (viii) UV Resistance @ 500 hours ≥ 70% (ix) AOS ≤ 75 micron (x) Permittivity ≥ 1.25, (xi) Trapezoidal Tear Strength ≤ 520 N (xii) Permeability = 45Lt/m2/sec (xiii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI
Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without Boat
Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12 KN/m (ii) Mass ≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5 KN (iv) Elongation at break ≥ 60% (v) Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥ 70% (vii) AOS ≤ 75 micron (ix) Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤ 340 N (xi) Permeability = 2.00 x 10 ̄ ³ m/sec (xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) FOR GUWAHATI
Labour charge for laying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed.
Construction and supply of Wire-netting box of size 1.50mx 1.50mx 0.45m made with mechanically woven, double twisted , hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10x12 as per EN 10223 & ASTM A975 , mesh wire of 2.70mm (I.D)/3.70mm(OD)tensile strength of 450-500/mm²,edge wire/selvedge around it at least 2.5 times, lacing wire (zink P.V.C. coated) of 2.20mm (I.D.) /3.20mm (O.D) P.V.C. coating thickness of 0.50mm nominal, 0.38mm minimum and with average weight per unit being 12 kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with Zink coated steel wire of required length as directed, compling with A.S.TM and Europian norms, including payment of all duties,sale tax, any other taxes as applicable loading, unloading and staking them at the site of work in measurable stacks, complete as directed .
Filling and laying in cage with sand filled Geo bags of size 1.03m X .70m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power riven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost)
Carriage of Geo Bags of size 2.00 x 1.50 m including loading &unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed asdirected..(Distance to be calculated with respect to FOR Guwahati) (Total Distance: 340.00km).
Carriage of Geo Bags of size 1.03 x 0.70 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed.(Distance to be calculated with respect to FOR Guwahati)(Total Distance: 340.00km)
Carriage of 300 gsm Geo sheet of including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed.(Distance to be calculated with respect to FOR Guwahati).(Total Distance: 340.00km)
Supply of sewing thread/Yarn PPMF stitching thread (2000 Den,Kaplon) including payment of all taxes. For B-Type & A-Type Geo Bag
Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m x 0.10m x 3.00m with M-30 grade of cement concrete conforming to IS 1343 : 2012 using super-plasticizer @l.2 lit/bag of cement with graded broken coarse aggregates up to 20mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable with necessary cover and 4mm high tensile stirrups at 250mm C/C, in conformity with 1S-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside from both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 21 (twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 20 Km including loading, unloading & stacking complete as directed. (Including forest royalty and all taxes as admissible)
Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching without Boat
Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching by Boat
Supply of best quality non-galvanized fiber core flexible steel wire rope (I.S.2266/7), inclusive all taxes.
Supply of 'U' shaped bolt 19.00 mm including payment of sale tax etc.
Construction of temporrary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5m apart driven at atleast 0.75 m below ground and height above plint 2.5m. Split Jatti bamboo wall mud plastering white washing 2 coats, 10 cm thick touch roofing over bamboo rua frame placing at 0.15 m clear apart fitted with bamboo kamies from binding doors and windows with Bamboo Chattai strengthening with Bamboo frame binding with wire etc compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)
Local carriage of PSC Porcupines by diesel truck of 10 MT capacity including loading at stack yard and unloading and stacking at river bank for all lift complete as directed, (distance=14 Kms)
M/S NORTHERN GASES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid