PROVN OF GUN SHED FOR 122 MM HOWITZER D-30A (SIX LENGTH 24M X WIDTH X 10M X HEIGHT 4M) AT 313 FD REGT AND PROVN OF 60 TON WEIGHING BRIDGE IN DEPOT AREA OF 40 COY ASC (SUP) TYPE D UNDER GE (SOUTH) MEERUT CANTT

Amount

Surface excavation in soft/loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out for every 3 cm above/below 15 cm average clepth complete all as specified and directed.

M&L For Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

M&L For Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

M&L For Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per item No 8.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed.

M&L RCC M-25 (Design Mix) (using 20 mm graded crushed stone aggregates)as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. Complete all as specified and directed.

M&L RCC M-25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in Columns, pillars, piers, posts and struts Complete all as specified and directed.

M&L brick work with fly ash bricks in cement mortar 1:6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces,in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement all as specified and directed.

M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

M & L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F rolled mild steel as in roof trusses (framed), trussed, purlins,Posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F rolled mild steel plates ( plain on chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe 410 W (Gde E. 250) quality ‘A’ complete all as specified & directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers . complete all as specified & directed and as per manufacturer's instructions.

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified & directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm n exc 10 cm long complete all as specified & directed.

M&L For Sand filling under floors or in foundations including watering and consolidation and Well Compaction and ramming all as specified and directed by Engr-in-charge.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M & L For 150 mm thick plain cement concrete 1:4:8, type D-2 ( using 40 mm graded stone agrregate) as in sub floors, sub base, floors and paving etc.complete all as specified and directed.

M & L For plain cement concrete 75 mm thick, type B-1 1:2:4 ( using 20 mm graded stone agrregate) as in sub floors, sub base, floors and paving etc.complete all as specified and directed.

M&L For Forming Construction joint 30mm Deep x 10mm wide filled with Preformed Bituminious Filler and sealed with sealing comp[ound (Grade A) complete all as specified and directed.

M&L For Forming Contraction( Dummy) joint 65 mm Deep x 10 mm wide filled with Preformed Bituminioius Filler and sealed with sealing compound ( Grade A ) complete all as specified and directed.

M&L For Providing cement concrete 1:2:4 type B1 ( using 20 mm graded aggregate ) as in coping and the like including weathering slightly rounded or chamfered angles and throating as directed.

Excavation over areas n exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed.

M&L M-25 (using 20mm graded agg) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface flat. Complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished surface flat. Complete all as specified and directed.

Material & labour for hardcore of broken stone boulders of gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L 150 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub-base. complete all as specified and directed.

M&L laying 80 mm thick machine pressed precast PCC coloured interlocking paver block, as in footpath, parks, lawns, driveways, light/heavy traffic parking etc, moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-40 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring, finishing and sweeping extra sand; complete all as specified and directed.

To design, manufacture, supply and install/ commissioning of 60 ton PITL type weighbridge fully electronic STEEL WEIGHBRIDGE of following specifications:- (i) Model No : 60 ton.(COLIN) (ii) Capacity : 60,000 Kg X 10 Kg. (iii) Platform Size : 37 feet x13 feet (11.2m x 4m) (iv) Load Cells : 8 number of 30 ton each double ended shear beam type confirming to OIML International Standards. (Overload protection).DIGITAL GEMIC (v) Load Cell top plate : 8 nos of size 60mmx160mmx25mm thick (vi) Load Cells bottom plate : 8 nos of size 150mmx150mmx8mm thick Teflon plate. (vii) Load Cells base plate : 8 Nos of size 310x310mmx2mm (viii) Load Cells insulation bush: 8 Nos of size Teflon bush for lightening/earth protection of load cells.(FIBRE PLATES) (ix) Big Garter(ISMB) : 8 no's (300mmx150mm/16 inch)12.33 feet each (x) TRANSOM/JOINTS : 4 no's (xi) PLATE : 10mm thick with anti skid strips (xii) Platform: STEEL Platform (xiii) Intelligent Terminal: 01 Nos micro processor based digital Indicator with display charactor size-25mm,with Rs 232 port, Software calibration and 0.0002% nil. (xiv) Add display: 01 Nos Extra display for truck dirver size12mm (xv) Junction Box: 01 Nos Suitable to connect 8 load cells (xvi) Printer: 01 Nos 80 Col 240 CPS DOT Matrix. Make: Every Indian, Caliver & Colin

Rajneesh Jain

Tayal Builders

Manglam Engineers and Construction Co

M/S AGARWAL CONSTRUCTION CO.

Arun Construction Co.