REPAIR MAINT TO DRAIN CULVERT FENCING HARDSTANDING FOOTPATH COMPOUND WALL IN MD ACCN AREA AND REPAIR MAINT TO JOINERY PLASTERING FLOORING PLUMBING SANITARY FITTING AND OTHER MISC WORK IN SWARG MANDIR OFFRS MD ACCN OF AGE BR I UNDER GE MIS MHOW

Amount

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down shuters of any description n.exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sq. m each and refixing in the same opening after easing and adjusting etc complete all as specified.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as specified in SSR 2020 complete

S&F 35mm thick factory made second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick factory made, second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.Note: Glass and wire mesh shall be mesured and paid separately

S & F 30 mm thick factory made, second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.Note: Glass and wire mesh shall be mesured and paid separately

S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

M&L for cutting holes in brick/block walls built in in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick n.exc one brick complete as specified.

S&F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, hold fasts, wall ties hooks for hanging fans, plain angle etc all as specified and directed.

S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section.

S&F in repairs aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long

S&F aluminium anodised barrel tower bolts of extruded section 100 mm long

S&F in repairs aluminium anodised barrel tower bolts of extruded section 150 mm long

S&F aluminum anodised alloy handle 150 mm cast type

S&F aluminum anodised alloy handle 100 mm cast type

S&F in repairs aluminum anodised alloy handle 150 mm cast type

S&F stainless steel butt hinges 100 mm long..

S&F Butt hinges, medium weight,cold rolled mild steel, 100mm size

S&F Butt hinges, medium weight,cold rolled mild steel, 75mm size

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

Hacking out old broken glass ( any thickness ) size or description from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

All as per item No. 30 above but for figured glass pin headed type.

S&F glazing with 4.8mm thick sheet glass ordinary type including rubber beadings/gaskets around glass panes all as specified.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

S&F in repairs mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel over coat of pink primer all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel all as specified and directed.

S&F in repairs 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor.

S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished

S&F Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size

S&F in repairs Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size

S&F in repairs Steel rolling shutters push pull or manual type thickness of lathe 1.25mm with ball bearing as specified including top cover, anchoring rod, hasp and staple and including one shop coat of primer ,erected in position as indicated complete all as specified.

S&F safety lever locks mild steel with 4 levers for rolling shutters

S&F Ball bearing for rolling shutter

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M & L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement ,mixed with liquid WPC complete all as specified. Note :- Water proofing compound shall be measured and paid separately

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified.

M&L for preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted.

M&L for preparation of new wall surface of and applying three coat of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of ceiling,chajja and applying three coats of white wash all as specified.

M&L for preparation of new plastered surface and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified and directed .

M & L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and apply one coat of oil bound distemper complete as directed and specified.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M & L for vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 58 above but in skirting over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dados 450X300X7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size, 6 to 7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in coloured cement to match with colour of tile complete all as specified and as directed.

M&L for heavy duty industrial vitrified coloured tiles of size 30cmx30cmx10mm thick (with grey cement and pigments) set , jointed and pointed in neat cement slurry in floor, laid over and including 15mm thick cement screed base in CM 1:6 laid and pointed with grey cement mixed with pigment to match the shade of tile including necessary cutting, rubbing, grinding complete all as specified

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite (of any type) 18mm to 20mm thick (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing with white cement (1:2) mixed with marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in CM 1:6 all specified and directed .

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for Stone dust filling under floors 50mm thick including watering and consolidation.

M&L for rounding to edges of stone slabs on edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down steel tubing 15mm bore and connections complete all as specified

Taking down steel tubing 20mm bore and connection complete all as specified

S&F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

M&L for cutting chases not exc 10cm girth in brick walls, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good the disturbed surface as per existing complete all as specified.

M&L for dismantling water tanks and removing to store of capacity exc 250 & n exc 500 litres complete all as specified and directed.

M&L for dismantling water tanks and removing to store of capacity exc 500 & n exc 1000 litres complete all as specified and directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity three layered (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete.

S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity three layered (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms ) complete all as specified & directed.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms ) complete all as specified & directed.

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe, lime concrete bedding, 'P' or 'S' trap complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs wash hand basins, white/ colour,vitreous china,of size 550mm x 400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand including waste pipe,waste coupling etc complete all as specified and directed.

S&F in repairs of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified

S&F in repairs of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight -45gms ) for kitchen sink complete all as specified and directed.

S&F 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repair 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repairs 10 litres capacity PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed.

S&F in repair CP brass fancy type 15mm bore bib taps half turn, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repairs CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repair CP mixer for WHB mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repairs wall mixture chromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repairs Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete.

S&F in repairs health faucet with flexible pipe of one metre length including stand complete all as specified

S&F in repairs fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F in repairs CP brass fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S&F in repair Toilet paper holder,Chromium plated complete all as specified

S&F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

M&L for stainless steel plate rack 1 mm thick for kitchen of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack shall not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg.

S&F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm complete,

S&F in repairs brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified and directed.

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long all as specified.

S&F in repairs soap dish (oval type ) mild steel chromium plated of size not less than 50mm dia complete.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S&F in repairs chromium plated towel ring

S&F in repair plastic water closet seat cover, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device comlete.

S&F in repair over head tank cover suitable for tank of 500 to 1000 litres capacity all as specified and directed

S&F in repairs 25 mm dia stainless steel curtain rod as approved by GE complete all as specified and directed.

S&F in repairs stailess steel brackets suitable for 25 mm dia SS curtain rod approved by GE complete all as specified and directed.

Taking down steel tubing 50mm bore and connection complete all as specified

S&F GI tubing 50mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified.

Dismantling of Asbestos cement (corrugated, semicorrugated) sheets in roof coverings complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed at site.

S&F 0.50mm thick (total coated thickness) pre-colour, pre profiles(Mangalore pattern) Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete all as specified and directed

M&L for cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall including necessary coping with concrete 1:2:4 type B1 over the sheet along the wall all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F mild steel framed work Fe-410-W(Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified and directed.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A

S&F mild steel work (tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 grade St-240 complete as directed and specified.

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

All as per item No 132 above but except brick. Note : Serviceable bricks obtained from demolition shall be re-used.

Demolition of cement concrete (unreinforced) of any decription and in any position not otherwise specifically provided for .

M&L for provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old surface as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 using 12.5mm graded stone aggregate as in required slope, average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or other equivalent as approved by GE. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying first coats of Dr fixit fastflex with a stiff nylon brush and leave 4 to 6 hours for dry. (d) Applying second coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the first coat) and leave 4 to 6 hours for dry. (e) Applying third coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the second coat) and leave 4 to 6 hours for dry. Note: (a)WPT Shall be done through approved applicator certified by Manufacturer (b)Liquid WPC shall be measured & paid seperately under relevant item.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved by GE

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase etc.complete all as specified.

M&L for 50mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified and directed.

S&F in repairs18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

S&F in repairs 18/19mm veneered particle boards interior grade,solid core, general purposes type, faced with decorative veneers on one face of type 'BB', fixed with screws to timber frame work complete all as specified.

M&L for cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in copings, kneelers, apex stones,bed plates, kerbs,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work all as directed

S&F in repairs18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate shall be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and directed.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process complete all as specified and directed.

S&F in repairs stainless steel self closing hinge (best quality ) of 75 mm size for PVC door shutter

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per item no 150 as above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item no 150 as above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F in repairs aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including powder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified

S&F in repair providing 25 mm thick (measured solid ) pre-cast cement concrete louvers and jallies with cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate including all mouldings and pre-cast frame, set in cement mortar 1:6 complete all as specified.

S&F coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns pinhole 8mm thick semi perforated square edge tile having NRC (Noise Reduction coefficient) of 0.50 (minimum) Light reflectance of 85% (minimum). Non combustible as per BS: 476 (PART-4), fire performance as per BS : 476(PART 6 & 7 ), humidity reistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, in true horizontal level suspeded on interlocking metal powder coated T-Grid of hot dipped galvanized iron section on Silhouetter profile, rotary stitched double webbed white with 1 mm reveal profile (White/black), comprising of main-T runner of size 15 x 32mm of length 3000m, cross - T of size 15 x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15 x 32 mm of lenght 600mm to form grid module of size 600 x 600 mm, from ceiling using galvanized mild steel item, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 19 x 19mm of length 3000 mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall S.S. screws. The work shall carried out as per specifications, drawing and as per directions of the Engineer-in-Charge .

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for Preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for applying two coats of exterior weather proof water base emulsion paint white/coloured including over a coat of cement base primer on newly plastered surfaces complete all as specified & directed. Make :- Asian-ACE, Berger-Wall Masta, Nerolac Suraksha

M&L for complete removal of existing treatment and preparation of old decorated surfaces and applying for two coats of exterior wheather proof water based emulsion paint white/coloured including over a one coat of cement base primer complete all as specified and directed. Make :- Asian-ACE, Berger-Wall Masta, Nerolac Suraksha

Dismantling posts or struts of any size (wood, steel or RCC) embedded in concrete,brick work,masonary etc. , including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each size not exceeding 0.50 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 250mm, watering and removing surplus spoil to a distance not exceeding 50 metre and making good disturbed surfaces complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

S & F mild steel for Joist, channel, angle,MS flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

S&F in repairs Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n.exc 10cmm long and diameter of neck 5 to 10mm complete all as specified and directed.

S&F Mild steel round bar 10 mm dia and over cut to length band to shape required incl cranking, bending spirally for similar work.conforming to Fe-410-W(Gde.E-250) quality-A or Fe 290(Gde-E-165) complete all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed NOTE: Each line wire to be measured separately.

Dismantling fencing wire mesh,any type complete all as specified

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,RCC fencing post with bolts etc, including provision of binding wire complete all as specified and directed. NOTE: Chain link fencing,MS round bars,MS flat,nut,bolt,washers shall be measured and paid separately under relevant item.

Supply only chain link fencing with galvanised 3mm to 4 mm dia wire, size of mesh 50mm x 50 mm or as directed by Engineer-in-Charge , made up to mattress or cages all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc, and getting out in soft/loose soil.

M&L for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia as in stirrups,spaces,nibs and binders with and including MS wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M & L for Reinforced cement concrete (Design Mix) M-25 grade as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed. NOTE: Reinforcement shall be measure and paid separately under respective item.

M & L for Reinforced cement concrete (Design Mix) M-25 grade as in Columns, pillars, piers, posts and struts complete all as specified and directed. NOTE: Reinforcement shall be measure and paid separately under respective item.

M & L for Reinforced cement concrete (Design Mix) M-25 grade as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. NOTE: Reinforcement shall be measure and paid separately under respective item.

M&L for Form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as directed.

M&L for Form work to sides of columns and similar work with fair finished surface complete all as directed.

M&L for Form work to sides of beams and soffit with fair finished surface complete all as directed.

M&L for Providing and laying kerb stone of M-25 grade cement concrete in position to the required line, level and curvature , cast in situ to the required size as directed by mchanically using suitable kerb stone laying machine and jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making necessary opening to drain water wherever required etc complete all as specified and directed .

M & L for chequered cement concrete tiles (glossy finish) 30 cm x 30 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) and provision of necessary coping at edges with PCC 1:3:6 type C1 complete all as specified and as directed.

Returning, filling in using excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and as directed.

Removing the excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

M/S Sunshine Construction