SPL REPAIRS TO DRAINAGE SYSTEM SANITATION IMPROVEMENT FALSE CEILING INCL CHANGE OF CONVENTIONAL LIGHTS TO LED FITTINGS AND ALLIED ELECTRICAL WORKS AT KALYANI ARCADE COMPLEX AND PROVN OF TOILET INCL ELECTRIFICATION AT FIRST FLOOR NEAR SIDE OF SOUTH B

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and labour for PCC, 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in sub base of floor, path etc complete all as specified and directed.

M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on brick wall and finished the surface even and smooth w/o using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on brick wall with 3% water proofing compound by the weight of cement and finished the surface even and smooth w/o using extra cement complete all as specified and as directed. (NOTE: WPC will be measured and paid seperately)

M&L for rendering 15 mm thick in cement mortar (1:6) on brick wall and finished the surface even and smooth w/o using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces and finished the surface even and smooth w/o using extra cement all as specified and as directed.

Supply only water proofing compound complete all as specified and directed.

M&L Plain Cement concrete (1:3:6) type C-1 (using 20mm graded aggregates) as in surface channels and drains complete all as specified and as directed.

M&L Plain Cement concrete (1:2:4) type B-1 (using 20mm graded aggregates) as in surface channels and drains complete all as specified and as directed.

Forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc.

Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete

M&L Providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, type B1, 1:2:4 using 20 mm graded aggregate, including necessary use and waste of formwork complete all as specified and directed.

M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and columns in floor, roof landing, balconies, canopies, deck slab and shelves etc complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

-ditto but with 6 - 8 mm dia TMT bars

Dismantling cast iron work of any description complete all as specified and directed.

Dismantling wrought iron or mild steel of any description complete all as specified and directed.

M&L Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-W Gde E-250 complete all as specified and directed.

S & F light grade galvanized tubes 50 mm dia with all fitting fixed as in ceiling for hanging false ceiling including cutting holes or through bricks walls of 150mm depth built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as required superfical area exc 150 Sq Cm but n exc 400 Sq cm complete all as specified and directed.

Supply and fix expanded metal having weight not exc 4 Kg/Sqm , cut to length , bend to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples on steel members complete all as specified and directed.

Dismantling and taking down of false ceiling including ceiling board and timber framework/metallic snap grid complete all as specified and directed.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 6 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of primer on exposed surfaces complete all as specified and as directed.

Re-fixing of aluminium snap grid sytem with ceiling board using serviceable grid sections and ceiling board obtained from taking down of false ceiling including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of primer on exposed surfaces complete all as specified and as directed.

Material and labour for 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregates, as in footpath, sub base of floor etc complete all as specified and directed.

M&L for Chequered cement concrete tiles (coloured) of size 250 mm X 250 mm X 25mm thick , set, jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement & pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M & L for PCC 1:3:6 type C1 (20mm graded stone agg), 75 mm thick, finished the concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

S &F as in repair cast iron Grade FG 150 grating, railing, frame manhole cover fire and stoot doors, dampers, stop valve box and similar articles etc (weight n exc 3 Kg each ) including frame different size fixed in concrete cover as directed by Engr in Charge.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Supply and fixing machine pressed precast concrete interlocking paver block with grey cement and pigmnent of any shape and size as approved by GE conforming to IS-15658-2006 of 60 mm thickness, M-35 grade laid over sand cushioning complete all as specified and directed. (NOTE: Sand cushioning will be measured and paid seperately)

Taking out of interlocking paver block, any shape or size and Re-laying the same after removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed. (NOTE: Sand, if required for correction of cushioning level will be measured and paid seperately. Replacement of broken paver block shall be paid seperately as "Supply only")

Supply only machine pressed precast concrete interlocking paver block with grey cement and pigmnent of any shape and size as approved by GE conforming to IS-15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge

S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge

Cleaning of existing covered/ uncovered (Partly)/ Semi or fully filled up) drain of any opening width and depth by removing and refixing of cover slab (whereever applicable) taking out accumlated silt, mud earth, rubbish, vegatation etc from the drain and removing the same at a distance exc 500 mtr but not exc 1 km where directed incl washing of drain with water complete all as directed by Engr-in-charge.

Cleaning of blocked waste line (of any bore) from sink/Urinal/wash hand basin to floor trap manually (by pushing a peace of bamboo split, tired with gunny bags at one end to other) including dewatering and well flushing the line with water and testing on completion as directed by Engr-in Charge.

Taking up/down plants or vegetation growth wall upto roof level by means of cutting hole into brickwall and making good the surface of dismantled portion (not exc 150 Sqm cm superfical area and not exc one brick depth) using bricks bats / aggragate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match the existing surfaces, building height up to fourth floor complete all as specified and directed by Engr in Charge.

Excavation in trenches not exc 1.5 Metre wide and not exc 1.5 Metre in depth for foundation etc or for shafts, wells, cesspits, manholes, pair holes, cable/pipe trench etc not exc 10 sqm on plan and not exc 1.5 Metre in depth and getting out as in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil complete all as specified and as directed.

Rremoving excavated material not exceeding 50 metre and deposited where directed at a level not exceeding 50 metre above the strting point in soil complete all as specified and directed.

M&L concrete bed to drain pipes 450 mm bore incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete type C2(1:3:6) mix using 40 mm graded stone aggregate for 150 mm bore of pipe incl necessary formwork complete all as specified and directed.

M&L concrete bed to drain pipes 150 mm bore incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete type C2(1:3:6) mix using 40 mm graded stone aggregate for 150 mm bore of pipe incl necessary formwork complete all as specified and directed.

Supply and laying 450 mm bore reinforced concrete pipe of Class NP-2, with collars, laid and jointed complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying 150 mm bore reinforced concrete pipe of Class NP-2, with collars, laid and jointed complete all as specified and as directed by the Engineer-in-Charge.

M&L for complete removal of existing treatment of walls, pilasters, cornices etc by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and afflorescence salts, trading oil, greasy spot and washing down with water complete all as specified and directed.

Preparation of old painted/decorated surfaces of walls complete all as specified and directed.

Preparation of old painted/decorated surfaces of ceilings complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of ceilings complete all as specified and directed.

M&L for applying Two Coats of Distemper Oil Emulsion over a coat of chalk whiting on walls complete all as specified and as directed.

M&L for applying Two Coats of Distemper Oil Emulsion over a coat of chalk whiting on new plastered surfaces of ceilings complete all as specified and as directed.

M&L for applying one coat of Distemper Oil Emulsion on old plastered surfaces of walls complete all as specified and as directed.

M&L for applying one coat of Distemper Oil Emulsion on old plastered srfaces of ceilings complete all as specified and as directed.

Material and labour for applying two coats of exterior acrylic emulsion paint over a coat of alkali resistant primer on new plastered surfaces of walls, bands, cornices, offsets, pillars etc complete all as specified and as directed.

Material and labour for applying one coat of exterior acrylic emulsion paint on old plastered surfaces of walls, bands, cornices, offsets, pillars etc complete all as specified and as directed.

Material and labour for applying two coats of cement base paint over a coat of alkali resistant primer on new plastered surfaces of walls complete all as specified and as directed.

Material and labour for applying one coat of cement base paint on old decorated surfaces of walls complete all as specified and as directed.

M & L for three coats of white wash on new wall surfaces complete all as specified and directed.

M & L for two coats of white wash on old wall surfaces complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D-2 (Using 40mm graded crushed stone aggregate) as in foundation and filling mass concrete complete all as specified and directed.

M&L Plain cement concrete (1:5:10) type E-2 (Using 40mm graded crushed stone aggregate) as in foundation and filling mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in cills, copings, kneelers, apex stones, bed plates etc incl necessary formwork complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as reqd 150 mm bore pipe complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20 mm graded stone aggregates) as in cover slabs, set in cement mortar 1:4 complete all as specified and directed. (NOTE: Reinforcement will be measured and paid seperately)

M&L 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone agg) in sub floor for laying floor finishes complete all as specified and as directed.

M&L coloured non- skid ceramic tile 7 to 8mm thick (square/ rectengular), area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, laid in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed of cement mortar (1:4) complete all as specified and directed.

Material and labour for 7-8mm thick glazed ceramic coloured tiles 300 X 200 x 7mm thick with cement slurry laid over & including 10mm thick backing coat in cement mortar 1:4 as in dado/ skirting/ vertical surfaces of wall complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plan colour PVC sheet reinforeced with M.S square tubs , supply and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

Supply and fixing gun metal gate valve with iron wheel head, ISI marked, screwed both ends for iron pipe for 15 mm bore complete all as specified and directed.

Ditto all as per item here in before but 20mm dia of bore

Ditto all as per item here in before but 25mm dia of bore

S&F 100mm butt hinges stainless steel medium weight complete all as specified and as directed.

S& F 150 mm long aluminum anodised barrel tower bolt extruded section and fixed complete all as specified and as directed.

S&F aluminum handle cast type 150 mm long complete all as specified and as directed.

S&F 200mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.

Material and labour for cutting chases in brick walls, pinning in, making good to facinggs where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for MS flat irons used as in Holdfast conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for preparing surfaces of mild steel holdfasts and treated with tar or coal tar black paint complete all as specified and directed.

M&L for two coat of synthetic enamel paint over one coat of redoxide primer after preparation to the new steel surfaces not otherwise specifically provided for over 10 cm width or girth complete all as specified and as directed.

S&F 100 mm dia sand cast iron soil waste and vent pipes of any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F 100 mm dia sand cast iron soil waste and vent pipes of any length with or without ears with cement joints, laid in trenches or in floor complete all as specified and directed.

S & F 100 mm bore cast iron (sand cast) branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75 mm dia CI floor trap, with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates complete all as specified and directed.

S&F 100 mm bore cast iron (sand cast) bends (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and directed.

Supply and fixing 100 mm bore cast iron (sand cast) Cowl, complete all as specified and directed.

S&F 150 mm X 150 mm cast iron gully trap complete all as specified and directed.

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI)

S & F of vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, with 32mm dia Brass Chromium Plated Waste Fitting complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE / KOHLER / MARC / CERA /CRABTREE).

S & F GI tubing and fitting for water supply 15 mm bore medium grade with all fittings and fixed to wall(concelled) type in floor and wall complete all as specified and directed.

S & F GI tubing and fitting for water supply 20 mm bore medium grade with all fittings and fixed in floor and wall complete all as specified and directed.

S & F GI tubing and fitting for water supply 25 mm bore medium grade with all fittings and fixed in floor and wall complete all as specified and directed.

S&F chromium plated brass Bib cock long body with wall flange, fixed to 15mm bore of iron pipe complete all as specified and directed. (MAKE : ESS ESS, Cat No : TM-102 / JAQUAR, Cat No : FLR-5047N / PARRYWARE, Cat No: G0604A1 / CERA, Cat No: F2003151 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE)

S&F concealed stop cock with body, 15mm bore cast copper alloy cromium plated fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed (MAKE : ESS ESS, Cat No : T-108 / JAQUAR, Cat No : CON-069FTK / PARRYWARE, Cat No: G0161A1 / CERA, Cat No: F3002361 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE)

S&F chromium plated brass angular stop cock with wall flange as in repair fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No. TM-104 / JAQUAR, Cat No: FLR-5053N / PARRYWARE, Cat No: G0607A1 / CERA, Cat No: F2003201 or equivalent model in KOHLER /MARC / CRABTREE / HINDWARE)

S&F Chromium plated brass Pillar tap fixed to wash hand basin, etc. complete all as specified and as directed. (Make : CERA, Cat No: F3002101 / JAQUAR, Cat No: CON-011KN / ESS ESS, Cat No: C-201 / PARRYWARE, Cat No: T3501A1 or equivalent model in KOHLER /MARC / CRABTREE / HINDWARE)

Supply and fix Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

S&F chromium plated brass over head shower rose with arm fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : CERA, Cat No: F7020102 / PARRYWARE, Cat No: T9984A1/ESS ESS, Cat No: OH-107A or equivalent model in JAQUAR / KOHLER / MARC / CRABTREE)

Supply and Fixing Tubular towel rail, 20mm dia, D type, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : ESSCO, Cat No : AEC-1111 / PRAYAG, Cat No : BA-10 or equivalent model in GEM / PARKO / LAURET / AQUEL)

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / PRAYAG, Model : Smart or equivalent model in COMMANDER / CERA)

S&F vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental or equivalent model in HINDWARE / CERA)

Supply and Fix vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 or equivalent model in CERA)

S&F chromium plated brass chromium plated toilet paper holder, complete all as specified and as directed (Make: ESS ESS, Cat No: AC-206 / JAQUAR, Cat No: AKP-35751P/ CERA, Cat No: F5004109 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE / PARRYWARE)

S&F chromium plated brass health tube with hook complete all as specified and as directed. (Make: Ess-Ess, Cat No: C-232 A / JAQUAR, Cat No: ALD-IVC-593 / CERA, Cat No: F8030401AB or equivalent model in KOHLER / MARC / HINDWARE / CRABTREE / PARRYWARE)

S&F Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe, flushing cistern and waste pipe) incl providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 and securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe and provinding and fixing PTMT urinal spreader complete all as specified and directed. (Make of Urinal : Parryware Cat No. C-0575/ Jaquar, Cat No: URS-WHT-13261 or equivalent model in HINDWARE / CERA) (Make of Urinal Spreader : PRAYAG, Cat No: 186 or equivalent model in JEXON/SHAKTI/POLYTUF)

S&F chromium plated brass fancy type soap dish, etc, complete all as specified and as directed. (Make : ESS ESS, Cat No: AC-503B / CERA, Cat No: F5003106 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE/ JAQUAR / PARRYWARE)

S&F 32 mm bore LDPE discharge pipe of pressure rating 6 kg/cm², as in waste pipe of WHB complete all as specified and directed.

S&F 100 mm cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc.complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No. 118 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No.118 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 118 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 118 above but using 4.0 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring without terminal box).

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.

All as per item No. 123 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 123 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 123 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

S&F Switch piano, flush type 6 amps, 240 volts, single pole, one way, conforming to IS complete all as specified and as directed.

S & F new socket outlet, 5 Amps, 5 pin flush type, multipurpose, 230 Volts AC complete all as specified and as directed.

S&F Switch socket combination 3 pin 5 Amp AC 230 Volts piano flush type, complete all as specified and directed.

S&F Switch socket combination 6 pin, 5 and 15 Amp AC 230 Volts piano flush button type (multipurpose) complete all as specified and directed

S&F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed.

S&F lamp holder with back plate suitable for batten fittings or to be mounted on walls complete all as specified and directed.

S&F stepped type electronic fan regulator (speed regulation in 5 steps), suitable for ceiling fan 1200mm/1400mm sweeps, 100 watts complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door, 240 volts, 4 way complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / C&S, Cat No; CSDBSPNPDD04 / BCH, Cat No: BCHSPNDD04W / HPL, Cat No: MDBDD04 / HAGER, Cat No: VYS04D / HAVELLS, Cat No: DHDPSHODRW04 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D / C&S, Cat No: CSDBSPNPDD08 / BCH, Cat No: BCHSPNDD08W / HPL, Cat No: MDBDD08 / HAVELLS, Cat No: DHDPSHODRW08 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)

S&F MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (Note: Make of MCB shall be same as DB)

S&F MCB, 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed. (Note: Make of MCB shall be same as DB)

Refixing of MCBs any size or any type including electrical connections complete all as directed by Engr-in-Charge.

Supply and fixing MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 or equivalent model in ABB / INDO ASIAN / HAGER / ANCHOR / LEGRAND / NORTH WEST / BCH / HPL)

S&F in repairs surface mounted LED luminaire, 1 X 20 Watt in extruded aluminium housing, with polycarbonate diffuser & integrated electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size incl taking down existing fitting complete all as specified and directed. (MAKE: HAVELLS, Model: ENDURA LINEAR NEO / HALONIX, Cat No: HLB-03-20-CW-AL-HL1 / SURYA, Cat No: SLE BTN T8 20W / BAJAJ, Cat No: BCLSBAL 20W CW / JAQUAR, Model : Glaze LED Batten or equivalent model in PHILIPS / HPL/ CROMPTON / CENTURY LED LTD / SIMOCO)

Supply and Fix in repairs recess mounted LED luminaire suitable for 600 x 600 snap grid ceiling with constant current driver with in built protection against lightning, over voltage & short circuit complete with all accessories with and including 40 Watt LED 6000K (having efficacy of 100 lumen/watt) and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor cable of size 1.5 sqmm (nominal area) complete all as specified and directed. (MAKE: HALONIX, Cat No: HLFPR22-02-40-CW-R-WC / SURYA, Cat No: SLE DS 40 22S / SIMOCO, Model: SL40C-2X2 or equivalent model in HAVELLS / HPL / JAQUAR / PHILIPS / CENTURY LED LTD /CROMPTON / BAJAJ)

NOTE FOR ITEM NO. 136 & 137 :- (1) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of work. The product will be replaced free of cost in following cases :- (a) Manufacturing Defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 metre) below 90% of claimed value of lumen (or lux at 1 metre) of the LED/luminaire. (d) Decision of GE in this regard shall be final and binding. (2) All LED/luminaire shall meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/Section 13. (3) The contractor shall submit the LM-80 and LM-79 test report as specified in Particular Specifications. (4) Even though specific catalogue number of the above mentioned manufacturers have been specified, it shall be ensured prior to sample approval that the products comply with the description of item mentioned in BOQ and specifications laid down in the tender.

Supply and Hanging, ceiling fan, 1400 mm sweep with down rod, canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC casing-caping of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC casing capping shall be measured as one unit)

All as per Srl. Item No. 144 above but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in PVC concealed conduit. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

Supply and fixing exhaust fan 380 mm sweep, heavy duty, 1400 RPM, heavy duty, AC Single Phase 230/240 volts, metal body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia from ceiling rose to fan complete all as specified and directed. (MAKE: CROMPTON, Model : EXHD380-4-1 / USHA, Model: Turbo Heavy Duty or equivalent model in HAVELLS / BAJAJ)

DEB AND COMPANY

UNITED ENGINEERS

PRABIR TRADERS

SHEIKH ENTERPRISE

R.K.TRADING CO. INDIA