SPL REPAIR TO BLDG NO. P-126 AT NEW ASSEY LINE OF HQ 350 INF BDE AND CERTAIN OTHER SANCTIONED WORK

Amount

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water, complete all as specified and as directed.

Material and labour for rendering 12mm thick in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished fair and even, complete all as specified and as directed

Material and labour for 15mm thick in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick walls or on concrete surfaces with water proofing compound as per manufacturing instruction, complete all as specified and as directed. Note: WPC shall be measured and paid separately

"Supply only" integral water proofing compound (ISI Marked), complete all as specified and as directed.

Material and labour for plastering 5mm thick in cement mortar (1:3) furnished even & smooth without using extra cement as on ceiling, complete all as specified and as directed

Dismantling of concrete by chiselling from RCC members like col, beam parapet, facia, chajja, ceiling etc exposing the reinforcement without disturbing the reinforcement and primed with using Araldite epoxy resins manufactured by M/s ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture and providing doubling coat of 20mm thick in CM 1:3 including necessary form work and reinforced with chicken wire mesh and rendering 15mm thick in cement mortar 1:3 at any height, complete all as specified and as directed

Material and labour for preparing newly plastered surface of wall and applying two coats of Oil emulsion distemper and primer over a coat of 1mm thick wall care putty (in two layers) on plastered surface, complete all as specified and as directed

Material and labour for complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coat of oil emulsion distemper and primer over a coat of 1mm thick wall care putty (in two layers), complete all as specified and as directed

Material and labour for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and as directed

Material and labour for preparation of old decorated plastered or unplastered surfaces and apply one coat of white wash on walls including cornices etc all as specified and as directed

Material and labour for preparation of newly surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and as directed

Material and labour for preparation of old plastered/ treated surface of ceiling and applying one coat on white wash on ceiling, complete all as specified and as directed

Material and labour for preparation of newly surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed

Material and labour for complete removal of existing treatment of old plastered surface of wall and applying two coat of cement base paint, complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level), complete all as directed

Material and labour for 25mm thick PCC 1:2:4 type B-0, (using 12.5mm graded stone aggregate) and finishing the surface rough and even to receive top layer as under tiles, stone etc, complete all as specified and as directed

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc .and brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20 to 25mm thick as in flooring / stair case landing, laid over & including 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed

Material and labour for stair case tiles single piece of suitable length & width as per site requirement of 10mm thick for steps/riser of size as per site requirement required laid over & including 15mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed

Material and labour for 16-18mm thick pre-polished green marble as in cooking platform over 15mm thick screed bed in CM (1:6) including grinding and mirror polished/ granite polished and making hole for LPG pipe and rounding of edge of stone, complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed

Material and labour for coloured ceramic glazed tiles (premium quality) of size 300x450x7mm thick fixed with neat cement slurry in vertical surface to wall pointing in coloured cement to match over and including 10mm thick plastering in CM 1:4, complete all as specified and as directed.

Material and labour for non-skid ceramic tiles (premium quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement mortar 1:6, complete all as specified and as directed

Material and labour for coloured non-skid ceramic tiles (premium quality) 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white as coloured cement to match 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying of floor finishes, complete all as specified and as directed

Ditto as per Srl item No 25.00 above but skirting on wall in CM 1:4, complete all as specified

Demolition of concrete of any description and in any position, complete all as specified and as directed.

Material and labour for water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- Note:- Plan area of sunken portion will be measured. (i) Application of Two component acrylic modified cementitious coating (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- (bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/ FOSROC Nitabond SBR latex/ Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/ Brush Bond FOSROC/ Dr Fixit/ STP/ CICO.

(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/ Dr Fixit/ STP/ CICO/ Berger of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/ FOSROC/ Dr Fixit/ STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107/ Brush Bond FOSROC/ Dr Fixit/ STP/ CICO/ Berger of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces. (jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. (kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/ FOSROC/ DR Fixit/ STP/ CICO/ Berger conforming to IS 2645.

Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/ Berger/ FOSROC/ DR Fixit/ STP/ CICO conforming to IS 2645. (ll) All the corners and joints should be pre-treated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/ FOSROC/ Dr Fixit/ STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (ii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (iii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around. (iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified.

(v) Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and as directed. (vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Notes : (i) Item No 25(iv), (v) & (vi) shall be measured and paid separately under respective items of BOQ.

Material and labour for cement concrete 1:5:10 type E-2 (using 40mm stone aggregate) as in sunken flooring complete all as specified and as directed.

Supply and fixing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and as directed

Material and labour for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in flooring for laying floor finish complete all as specified and as directed

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces, complete all as specified and as directed

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as directed

Material and labour for brick work with fly ash bricks, straight or curved as plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and as directed

All as per Srl item No 34.00 here-in-before but except bricks, complete all as specified and as directed.

Material and labour for brick work with fly ash ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4, complete all as specified and as directed

Demolition of reinforcement cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level), complete all as specified and as directed

Material and labour for nominal mix RCC (1:1.5:3) type B-1 (using 20mm graded crushed stone aggregate) as in slab, shelves chajja, facia and similar articles etc. complete all as specified and as directed.

Material and labour for pre-cast RCC (1:1.5:3) type B-0 (using 12.5mm graded crushed stone aggregate) as in slab, landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed

Material and labour for reinforcement cement concrete 1:1.5:3 (type B-1 nominal mix (using 20mm graded crushed stone aggregates) as in foundations, including raft footing, foundation beams, for columns etc, basement slabs and mass concrete complete all as specified and as directed

Material and labour for reinforcement cement concrete 1:1.5:3 type B-1 nominal mix (using 20mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed

Material and labour for reinforcement cement concrete 1:1.5:3 type B-1 nominal mix (using 20mm graded crushed stone aggregates)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and complete all as specified and as directed

Material and labour for mild steel bars 6 to 8 mm dia deformed bars cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.9mm dia confirming to Fe-410-0, complete all as specified and as directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

All as per Srl item No. 44.00 above but TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified

Material and labour for formwork to chajjas and similar items including edges, complete all as specified and as directed

Material and labour for Providing PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs/ coping rounded complete all as specified and as directed

Material and labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in foundations, filling and mass concrete, roof padding 50mm thick in average, complete all as specified and as directed

Dismantling of brick tiles single layer as in roof covering complete all as directed.

Demolition of mud in roofs any thickness including plastering& leeping complete all as directed.

Material and labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, complete all as specified and as directed (WPC included), complete all as specified and as directed.

Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and as directed by Engineer-in-Charge with WPC

Material and labour for cleaning the surface and made free of dirt, foreign particle, all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight complete all as specified and as directed

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator ”

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n.exc 4 sqm each complete all as specified

Taking down shutters of any description exc. 1 Sqm and n.exc. 2 sqm, complete all as directed

Supply and fixing of framed work as in doors or gates of approved pattern & design of angle or other section conforming Fe 290 (Gde-E-165) quality 'B' with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering of doors, etc. to be prepared for hanging or sliding with and including either hooking and hinges or steel hanging door fittings, cooler stand etc (excluding of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed

Supply and fixing of factory made flush shutters, 35mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side including 35 x 6mm thick 2nd class HW lipping on edge, complete all as specified and as directed

Supply and fixing of 35mm thick 2nd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.24 (a) of SSR part-I complete all as specified and as directed

Supply and fixing of in repair 19mm thick particle board one side decorative one side commercial grade, prelaminated on both side with decorative choice lamination, fixed with screws to timber frame work, including 19mm wide, 6mm thick 2nd class HW lipping on edges complete all as specified and as directed.

Supply and fixing continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps when open in 30mm complete all as specified and as directed

Supply and fixing 100mm size hasp and staple, extruded aluminium alloy, fabricated type anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing 2nd Class hard wood Plain fillets, square, rectangular or triangular in section clean swan, sectional area exc 13 sqcm & n.exc 25 sqcm secured with nails or brads complete all as specified and as directed

Supply and fixing 75mm Aluminium handles, cast type, anodised fixed with screw, complete all as specified and as directed

Supply and fixing powder coated aluminium(minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivot and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for Glazing/ panelling, C.P. brass/ Stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Supply and fixing 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in each panes complete all as specified

Supply and fixing figured glass pin headed type, 3mm thick and fixed with oil putty, size of glass n.exc 0.50 sqm in each pane complete all as specified and as directed

Supply and fixing in repair factory made built-in steel cup board with pressed steel frame and pressed steel shutter 1.00mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 20mm dia with brackets fixed on inner side of cupboard, provn of MS peg set 3 pegs fixed on inner side of shutter and 1.00mm thick black sheet 3 Nos shelves as shown in Drg including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ/TD-1104/08 Sheet 1/2 to 2/2, complete all as specified and as directed

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour sheet reinforced with MS square tube supplied and fixing as per specification and drawing

Supply and fixing 30mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having stip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified

Supply and fixing of extruded aluminium alloy butt hinges 100mm with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed

Supply and fixing of extruded aluminium alloy butt hinges 75mm with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed

Supply and fixing of extruded aluminium alloy butt hinges 75mm with galvanised mild steel hinge pin, anodised and fixed in repair complete all as specified and as directed

Supply and fixing Aluminium, anodised, barrel tower bolts 200mm of extruded section and fixed, complete all as specified and as directed.

Supply and fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed, complete all as specified and as directed.

Supply and fixing in repair aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed, complete all as specified and as directed.

Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised 125mm in size, complete all as specified and as directed

Supply and fixing in repair extruded aluminium alloy handles, fabricated type, anodised 125mm in size, complete all as specified and as directed

Supply and fixing 300mm long mild steel sliding door bolts stove enameled black, with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified

Supply and fixing 100mm size butt hinges medium weight cold rolled mild steel, complete all as specified and as directed

Supply and fixing 200mm long mild steel tower bolt stove enameled black with bright bolt, complete all as specified and as directed.

Supply and fixing 125mm mild steel pressed handles oval type, stove enameled black, complete all as specified and as directed

Supply and fixing in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and as directed.

Supply and fixing in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 25mm complete all as specified and as directed.

Supply and fixing in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed, complete all as specified and as directed.

Material and labour for preparation of new wood surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed

Material and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome, complete all as specified and as directed

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified

Ditto as per Srl item No 90.00 here-in-before but 20mm bore

Supply and fixing 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified

Ditto as per Srl item No 92.00 above but 20mm bore, complete all as specified and as directed.

Supply and fixing in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting complete all as specified and as directed

Supply and fixing in repair single lever basin mixer with popup waste, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair single lever sink mixer swinging spout (wall mounted) with connecting legs & wall flanges suitable for fixing to 15mm bore GI pipe, complete all as specified and as directed Make:- Jaquar/ Cera/ ESS-ESS.

Supply and fixing in repair two way wall mixer with diverter with SS Cover plate and all connected accessories, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed Make:- Jaquar/ Marc/ Cera.

Supply and fixing in repairs stop valves 15mm, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed Make:- Jaquar/ Cera/ ESS-ESS.

Supply and fixing in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified Make:- Jaquar/ Hindware/ Cera.

Supply and fixing in repair Vitreous China ware wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets or erecting stand with full pedestal, complete all as specified and as directed. Make:- Jaquar/ Hindware/ Cera.

Supply and fixing in repair PVC connection 450mm long, 15mm size with PTMT nuts complete, all as specified and as directed

Supply and fixing in repair flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling, complete, all as specified and as directed

Supply and fixing in repair PVC waste pipe 32mm dia flexible for wash hand basin complete all as specified and as directed Make -Polyplast/ Symet or equivalent

Supply and fixing in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and as directed. Make:- Hindware/ Parryware/ Cera.

Supply and fixing in repair CP grating 125mm dia fixed in repair, all as specified and as directed.

Supply and fixing in repair, soap dish holder and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Supply and fixing in repair corner shelf 300mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed

Material and labour in repair chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and as directed

Supply and fixing in repairs Towel rail 600 mm long and 20mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and as directed Make:- Jaquar/ Cera/ ESS ESS.

Supply and fixing in repair, stainless steel kitchen rack of size 31”x36”x10” and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed Make:- Blue Star/ Jayna/ Nirali.

Supply and fixing Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Make:- Blue Star/ Jayna/ Nirali.

Supply and fixing 500 ltr UV protected, antimicrobial white coloured rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified Make:- Sintex (Pure)/ Rotex/ Sheetal.

Supply and fixing 2000 ltr UV protected, antimicrobial white coloured rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified

Supply and fixing 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified

Supply and fixing in repairs chromium plated shower rose 125mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and as directed Make:- Jaquar/ Cera/ ESS-ESS.

Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store complete all as specified and as directed

Supply and fixing 110mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and as directed

Supply and fixing 110mm bore PVC pipes single socketed in any length with rubber ring joints fixed to laid in trenches, complete all as specified and as directed

Supply and fixing 75mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and as directed

Supply and fixing 75mm bore PVC pipes single socketed in any length with rubber ring joints fixed to laid in trenches, complete all as specified and as directed

Supply and fixing 110mm dia PVC (SWR) bends any radius complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR) bends any radius complete all as specified and as directed

Supply and fixing 110mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR) vent cowl complete all as specified and as directed

Supply and fixing 110mm dia PVC (SWR) vent cowl, complete all as specified and as directed

Supply and fixing PVC (SWR) floor trap with grating including jointing to waste pipe with solvent cement joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 Type C-1 (using 40mm graded stone aggregate) as in plinth protection/path, complete all as specified and as directed

Material and labour for 75mm thick PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) as in sub base path etc, complete all as specified and as directed.

Material and labour durastone tiles 400x400x10-12mm thick chequred pattern, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of Tiles over 15mm thick Screed Bed or Bedding in Cement Mortar 1:6, complete all as specified and as directed.

Material and labour for cutting chases, pinning in brick wall/slab etc and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed

Material and labour for cutting into existing manholes for connecting 100mm bore new drains by cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and as directed

Material and labour for salt glazed stonewere gully traps, square or round mouthed 150 x 150 mm size type 'P' including cast iron cover grating and setting and jointing to drain pipe in Cement Mortar 1:1 complete all as specified and as directed.

Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge

Material and labour for PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cement complete all as directed

Supply and fixing PVC (SWR) branch piece, double (double Y) equal or unequal for 75mm dia complete all as specified

Supply and fixing re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and as directed

Supply and fixing re-fixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and as directed

Supply and fixing in repair 15 dia angle valve fancy type chromium plated with long shank and cup complete all as specified and as directed

Supply and fixing in repair nahani trap or floor trap complete all as specified and as directed

Supply and fixing in repairs Vitreous China wash down water closet white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and stainless steel chromium plated hinging device fixed complete all as specified and as directed Make:- Jaquar/ Cera/ Hindware

Supply and fixing in repairs in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including water spreader and PVC pipe for drainage complete all as specified and as directed Make:- Jaquar/ Cera/ Hindware

Supply and fixing CP pillar tap fancy type long body ISI marked cast copper alloy chromium plated suitable for 15mm bore pipes with crutch or butter fly handle screwed for iron pipe or brass ferrule all as specified Make:- Jaquar/ Cera/ ESS-ESS.

Supply and fixing in repair CP pillar tap fancy type long body ISI marked cast copper alloy chromium plated suitable for 15mm bore pipes with crutch or butter fly handle screwed for iron pipe or brass ferrule all as specified Make:- Jaquar/ Cera/ ESS-ESS.

Supply and fixing vitreous china urinal partition white of size 310 x 700mm complete all as specified and as directed Make:- Jaquar/ Cera/ Hindware

Supply and fixing marble for shelves for soaps etc embedded in wall with cement mortar and making good complete all as specified and as directed

Material and labour for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed

Material and labour for wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc. complete all as specified and as directed

Material and labour for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and as directed

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out soft/ loose soil complete all as specified

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling/ mass concrete, complete all as specified and as directed.

Use and waste form work to sides of concrete foundations, footings, bases of columns and similar works rough finished flat surfaces of concrete all as specified.

Use and waste form work to sides of pillars, posts, columns and similar works rough finished square, rectangular or polygonal surfaces of concrete all as specified.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick works rough finished surfaces of concrete all as specified

Removal of excavated material upto exc. 250m but n.exc 500m and deposited where directed

Returning/ filling in including spreading levelling watering & well ramming in layers n.exc 25cm in soft/ loose soil complete all as specified and as directed

Taking down carefully existing point wiring of any type/ any size (i.e. on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light fittings as per Sch of credit and making good disturbed surface of walls, roof, floors etc. with any type of civil work involved complete all as specified and as directed

Material and labour for point wiring for light point unsheathed with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and including sunken pressed steel boxes duly painted with anti-corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge

Ditto as per srl item No. 162.00 above, but for one fan point controlled by one switch complete all as specified (ceiling fan and exhaust fan point)

Ditto as per srl item No. 162.00 above but for one socket outlet 5 Amps on independent board complete all as specified.

Ditto as per srl item No. 162.00 above but for one socket outlet 5 Amps on the same board controlled complete all as specified.

Ditto as per srl item No. 162.00 above but for one bell point controlled by one bell push complete all as specified.

All as per srl item No. 162.00 here-in-before but for one light point controlled by two way switches complete all as specified.

All as per srl item No. 162.00 above but with 2.5 Sqmm (nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing socket out let 5 Amp, 3/5 pin flush type complete all as specified.

Supply and fixing Socket outlet multi purpose 3 pin, 6 and 16 Amps, flush type complete all as specified.

Supply and fixing in repair Decorative wall mounting light fitting suitable for 09 watt LED lamp complete with glass shade polycarbonate cover including 1 x 09 watt LED lamp complete all as specified.

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.

Material and labour in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings all as specified and as directed

Supply and fixing five step fan regulator, electronic type, single phase, including connection complete all as specified.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated unsheathed multi-stranded copper conductor cable of 4 Sqmm drawn through new PVC rigid non-metallic concealed conduit (medium grade ISI marked) with all fittings including earth continuity FRLS PVC insulated unsheathed multi-stranded copper conductor cable 4.0 Sqmm PVC insulated with green insulation complete all as specified. Note : Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC conduit concealed shall be measured as one unit

Material and labour for SPN DBs, 8 way double door, complete all as specified and as directed.

Supply and fixing MCB SPN 32 Amps, 10 KA, B curve complete all as specified and as directed by Engineer-in-charge

Supply and fixing MCB SP 6 to 32 Amps, 10 KA, B curve complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed by Engineer-in-charge

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Supply and fixing energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore and MS clamp duly painted with two coat paint all as specified and as directed

Supply and fixing Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps including Top Plug complete all as specified & directed by Engineer-in- charge

Taking down carefully of ceiling fan of any sweep or make with dismantling blades all as specified and as directed by Engineer-in-Charge

Material and labour for hanging of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified and as directed by Engineer-in-Charge

Supply and fixing exhaust fan, metallic body heavy duty, 1400 RPM AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers (Superior quality made up of powder coated CRCA frame and Aluminium flappers) complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all as specified and as directed.

"Fixing only" serviceable tube light fittings any type and any description retrieved under item Srl No. 161, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade complete all as directed.

M/S RAJESH CONSTRUCTION COMPANY (BID ID -3097567)

NATIONAL BUILDERS (BID ID -3096485)

G S TRADERS (BID ID -3117080)