REPAIR TO ROOF SHEETS, JOINERY, FLOOR TILES AND OTHER MISC WORKS AT CDO STUDENT LIVING ACCN AND TRG AREA UNDER GE BELGAUM

M&L for Machine cut Kota stone slab 18-20mm thick, as in flooring over with and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, including cutting, waste, grinding, rubbing and polishing, with and including demolition of existing floor, complete all as specified.

S&F Machine cut kota stone slab 18-20mm thick, as in vertical surfaces such as skirting/dado, laid over and including 15mm thick backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, with and including demolition of existing skirting/dado, complete all as specifed and as directed.

Taking down shutters of any description of area n exc 1sqm each, complete all as specified and as directed.

S&F Factory made aluminium powder coated frame for doors, partitions, windows and ventilators with one or more rebates of extruded built up standard tubular and other section of approved make according to IS 1868 (Thickness or powder coating not less than 50 micron).) fixed with rawal plugs, aluminium anodised screws or fixing with clamps or with expansion hold fasteners including necessary filling up of gaps of junctions for glazing, panelling, aluminium anodised screws etc., complete all as specified.

S&F Factory made powder coated aluminium sliding type window/ventilator (Triple Track type), fabricated with aluminium sections bottom track of size 92 x 31.75 x 1.6mm, side & top frame 92 x 31.75 x 1.4mm, top & bottom shutter rail with 39 x 17 x 1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm of approved make according to IS (thickness of powder coating not less than 50 micron) with glazing clips, with and including 4mm thick sheet frosted glass for two shutters fixed with rubber gasket and SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire mesh shutter fixed with aluminium beading, anodised aluminium fitting/fixture such as required number of rollers of suitable size, interlocking cleats/plates etc as required, complete all as specified. Note : Quoted rate shall be inclusive of frame, shutter, sheet frosted glass, SS wire mesh and hardware such as butt hinges, tower bolts, handles, locking arrangement etc, complete as required at site.

S&F 4mm thick tinted reflective glass of any colour, ordinary quality with and including Neoprene beadings in squares exc 0.50 Sqm in each pane, complete all as specified.

S&F 12mm thick vernered decorative plywood, grade 1, with BWR resin, with decorative face verners on both faces fixed with screws in position with and including PVC/Neoprene gasket for glazing, glazing clips in doors, windows, partitions in squares not exc 0.50 Sqm in each pane, complete all as specified.

M&L for 12mm thick toughened glass as in door shutter / partitions etc., fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, diamond cutting edges with taper drilling to flush the screws, with and including necessary fixtures and fittings as required such as floor hinges, SS patches fitting top, bottom and sides, locks, handles, spider joint etc., concealed floor door spring and engraving as required, complete all as directed by Engineer-in-charge.

S&F IN REPAIR 100mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed.

S&F IN REPAIR 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed.