SPECIAL REPAIR TO ROOF TRETMENT AT AM05 AM02 AND AM25 AT AMU ADDN ALTN TO BLDG NOS SM317 AND PROVN OF TOILET BLOCK AT DEMO MECH COY UNDER GE MIS MHOW

Amount

M&L for taking down /dismantling existing roof treatment of any description ,thickness such as APP membrane roof treatment /weather course terracing /Hessian base tar felt including screed bed / plastering complete all as specified

M&L for cleaning the existing roof surface of any description and brushing with neat cement slurry @ 3 Kg per sqm all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 using 12.5mm graded stone aggregate ,25mm thick as in roof top finished even and smooth without using extra cement complete all as specified.

M&L for screed bed 15 mm thick in cement mortar 1:4 mixed with water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed Note: WPC shall be measured and paid separately under respective item.

Taking down cement plaster from brick or concrete surface including racking out joints hacking for key and scrubbing down with water complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with integral water proofing compound and finished the surface even and smooth without using extra cement all as specified .Note: WPC shall be measured and paid separately under respective item.

M&L for rendering 5mm thick on ceiling in cement mortar 1:3 mixed with water proofing compound and finished the surface even and smooth without using extra cement all as specified .Note: WPC shall be measured and paid separately under respective item.

M&L for preparing roof surface of any description and applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm all as specified .

M&L for cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.

M & L for applying two coats of tack coat of Industrial bitumen of grade 85/25 at the rate of 1.2 Kg per Sqm including cleaning the surface all as specified .Note: 1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat shall be measured and paid seperately.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric ( weight not less than 150 gms/sqm) laid on primed surface by forced torch application complete all as specified and as per Manufacturer's instructions.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg/Sqm for each coat over APP membrane including preparation of surface complete all as specified and directed

Supply only liquid water proofing compound

S&F in repairs GI tube 15 mm bore medium grade galvanized with all fittings and fixed complete to walls , ceiling or laid in floors all as specified.

All as per Item No 14 above but 25mm bore

S&F in repairs of 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I including provision of PTMT ball valve high pressure with polythene float and fly nut suitable for 25mm dia pipe

S&F in repairs of 2000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I including provision of PTMT ball valve high pressure with polythene float and fly nut suitable for 25mm dia pipe

S&F in repairs of 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I including provision of PTMT ball valve high pressure with polythene float and fly nut suitable for 25mm dia pipe

M&L for complete removal of existing treatment on wall /roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum facility) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling /roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum facility) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting. Note: Putty shall be carried out through air less spraying Machine (Mechanical means)

M&L for applying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade as approved (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as per Manufacture'r instruction Note: Emulsion shall be carried out through air less spraying Machine (Mechanical means)

M&L for applying two coats of distempering with superior quality acrylic distemper (ready mixed) having VOC content less than 50 gms / litres of approved shade and colour complete all as specified and as per Manufacturer's instruction

M&L for preparation of old treated ceiling surface of any description and applying two coats of white wash complete all as specified

M&L for preparation of old treated steel surfaces of any description exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for reparing RCC projection, chajjas,roofs,facia, column etc by preparation (ie) scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete 1: 1.5: 3 type A0 using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exceeding 2Kg per sqm but not exceeding 3Kg/sqm , thickness of concrete not exceeding 75mm ,finished the RCC surface even and smooth by using extra cement to match with existing inclusing necessary form work,scaffolding as required at site complete all as specified and directed by engineer in charge . Note : Work shall be carried out to the building to a height n.exc 9 metre and quoted rate shall be inclusive for necessary scafolding and safety devices as required at site . Nothing extra shall be admissible. on this account .

Surface dressing not exceeding 30cm deep and getting out in soft / loose soil complete all as specified

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified

Excavating over areas n.exc 1.5 m deep and getting out in any type of soil complete all as specified

Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point.

Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete.

M&L for moorum / Red bajri filling in floor or paving laid in layers not exceeding 15cm thick spread,levelled and rammed including watering complete all as specified.

M&L for hardcore with broken stone or boulders of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 150mm thick, watered and rammed to true surface complete all as specified.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filing,sub base of floor etc complete all as specified

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filing,sub base of floor etc complete all as specified

M&L for RCC M-25 grade concrete (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and the like complete all as specified Note : Reinforcement shall be measured and paid separately under relevant item.

M&L for RCC M-25 grade concrete (using 20mm graded stone aggregate) as in slab supported on wall , landings, beams canopies, deck slabs and shelves etc. complete all as specified. Note: Reinforced shall be measured and paid separately under relevant item.

M&L for RCC M-25 grade concrete ( using 20mm graded stone aggregate) as in beams,cantilevers.brussumers,lintels more than 1.50 span all as specified Note :Reinforced shall be measured and paid separately under relevant item.

M&L for RCC M-25 grade concrete (using 20mm graded stone aggregate) as in column,pillar, piers,posts and struts all as specified .Note : Reinforcement shall be measured and paid separately under relevant item.

M & L for high strength steel deformed TMT bars 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified.

All as per item No 41 above but 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work , vertical or to batter, rough finished surface of concrete complete all as specified

M&L for formwork to sides of concrete flat or curves, sides of pillar, posts, struts,piers,columns and stanchions rough finished surfaces of concrete complete all as specified .

M&L for use and waste of formwork to sides and soffits of slab such as roof slab,floor slab,landing and similar work etc not exceeding 200mm thick with rough fnished surface of concrete flat complete all as specified.

M&L for form work to sides and soffits of floor or roof beams haunching, lintel, column, cantilevers shelves includig supported over hangs etc with rough finished flat surfaces of concrete complete all as specified

M&L for brick work with fly ash brick using modular size brick, straight or curved on plan exceeding 6m mean radius built in CM 1:4 complete as specified

M&L for rendering 15mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified

M&L for rendering 15mm thick cement plaster in CM 1:4 on other than fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified

M&L for glazed ceramic coloured tiles of size 450mm x 300 mm x 6 to 7mm thick as in dados , skirting etc over and including backing coat 10mm thick in cement mortar 1:4, jointed in neat grey cement slurry and pointed in colour cement to match the colour of tile all as specified

M&L for non skid ceramic coloured tile 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, over and including 20mm thick screed bed in cement mortar 1:6 in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles all as specified

S&F vitreous china wash hand basin of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S&F vitreous china wash down water closet pan ( Pedestal pattern),white( excluding fixing bolts,flushing cistern and flush pipe) complete all as specified and directed

S&F PVC valve less,syphonic action type flushing cistern,low level ,10 litres capacity white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified

S&F PVC waste pipes of 40/32mm bore suitable for wash hand basin /sinks/urinals outlet complete all as specified

S&F PVC floor traps plain with grating of size 75mm and 300 mm long out let including jointing complete all as specified

S&F PVC pipe of 40 mm dia, in any length and in any position such as walls, ceiling or laid in floor or trenches etc. complete all as specified

S&F PVC bend suitable for 40mm dia PVC pipe complete all as specified

S&F PVC bends 75mm bore, any radius complete all as specified

S&F PVC (SWR) pipe 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors of dia 110 mm complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Bib taps (push type) cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified

S&F fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified .Make: Essco series of Jaquar or other equivalent as aproved by GE

S&F pilllar tap (swan neck), fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified

S&F stop / angle cock cast copper alloy high pressure, angle valve type, chromium plated suitable for 15mm bore steel pipe complete all as specified

S&F health faucet with S.S. flexible pipe of 1.00 to 1.50 metre length including holder complete all as specified .Make: Essco series of Jaquar or other equivalent as approved by GE

S&F PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified

S&F GI tubes 15 mm dia medium grade with all fitting fixed complete to walls and ceiling or in floor all as specified

All as per tem No 68 but 20mm bore

S&F 25mm dia Gun metal valve globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass complete all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete.

S&F SS tubular towel rail, 60 cm long, 20mm bore complete all as specified & directed.

S&F SS Toilet paper holder complete all as specified

S&F PVC door frames of sizes 50mm x 47 mm made out of 5 mm pre lam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F Mild steel pressed handles 150 mm, oval type, stove enameled black complete all as specified

M & L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of superior quality exterior weather proof water base emulsion paint over a coat of primer of same make on wall complete all as specified pilasters, cornices etc (upto G+3 storied building) scrapping down , brooming down or steel wire brushing, and washing with water after completion of precoat treatment applying two coats of Anti fungal Weather coat paint (Exterior emulsion) white or tinted over a coat of primer (X2) complete all as specified and directed. Note :- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat, application of second coat shall be got passed by Engineer-in-Charge (b) Written Warranty for four years or as per Manufacturer's instructions, whichever more shall be submitted by the contractor

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

M&L for stone dust filling under floors including watering and consolidation.

M&L for Machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M40 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed Note: Sand cushioning shall be measured & paid separately.

M&L for providing and laying factory made M 25 grade concrete kerb stone laid in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including providing necessary opening wherever required to drain water complete all as specified

S&F Reinforced concrete pipes 150 mm bore, class NP2 , laid and jointed complete with collars and including providing concrete 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for providing the following water proofing treatment on inaccessible roof surfaces (horizontal and vertical surfaces) through authroised applicator of manufacturers all as specified and directed : (a) Cleaning of new concerete surfaces properly and drying the surfaces and applying 10mm thick rendering in CM 1:4 over a coat of cement slurry mixed with and including WPC (b) Applying a tack coat of industrial bitumen grade of 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (c) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg/sqm (d) providing 3mm thick APP (Ataclic Polypropylene) modified water proofing membrane with polyestar core including overlaps, sealed and bonded to the surfaces with torch application all as per Manufacturer's instructions (e) Applying two coats of bituminous aluminum paint @ 200gm per sqm (min) in two coats as per manufactures instructions complete all as specified

Demolition of cement concrete (unreinforced) of any description above ground floor not exceeding 15cm thickness complete all as specified and directed.

M&L for vitrified ceramic tiles (area of each tile) not exceeding 0.36 sqm , 8 to 10 mm thick (light shade) Square/rectangular as in floors, set & jointed in neat cement slurry and pointed in coloured cement to with colour of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 93 above but in dado /skirting, set & jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10mm backing coat in CM 1:4 complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in levelling course average thickness 50 mm, finished the surface even and fair complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified

M&L for applying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over and including priming coat of exterior primer complete all as specified Makes :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield. Note:(a) . Application of Primer and emulsion shall be carried out through air-less spray machine (Mechanical means). (b) Wall care putty (if required at site before application of above painting in certain portion ) shall be done and same shall be measured and paid separately under relevant item

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling surface complete all as specified

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified

M&L for painting with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall/floor with clip complete all as specified

S&F PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete, Model No 555 of PRAYAG or equivalent as approved by GE complete all as specified

M&L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and evenly applying two coats of white wash on ceiling complete all as specified

M&L for washing rubbing down and stopping distempered surfaces of walls and evenly applying two coats of oil emulsion distemper with and including 1 mm wall care putty complete all as specified and directed

M&L for applying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over and including priming coat of exterior primer including 1 mm wall care putty complete all as specified Makes :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield. Note:(a) . Application of Primer and emulsion shall be carried out through air-less spray machine (Mechanical means). (b) Wall care putty (if required at site before application of above painting in certain portion ) shall be done and same shall be measured and paid separately under relevant item

S&F sheet glass 3.0 mm thick ordinary quality and glazing with beading, in squares each pane not exceeding 0.5 sqm including hacking out complete all as specified

S&F mild steel roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete all as specified and directed.

S&F in repairs GI tube 25 mm bore medium grade galvanized with all fittings and fixed complete to walls , ceiling or laid in floors all as specified.

M&L for Point wiring with FRLS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FRLS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for One light point/fan point controlled by one switch

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

One bell point controlled by one, 5 Amps Bell Push

All as per item no 110 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6 Amp 240 volt

S&F socket outlet flush type 5 pin, 6 amps, 230 volts

S&F switch piano flush button single pole one way 15 Amp 240 volt

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts

S&F ceiling rose surface bakelite three terminal

S&F integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or other equivalent in Wipro

S&F integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 ,Bajaj Cat Pt No. BCLSB 10 WH or other equivalent in Wipro

S&F LED street light fittings 1x30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 /66protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2

S&F double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified

S & F MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified Make :- HPL/L&T/HPL/Havells

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series

S&F Exhaust fan 250mm sweep, AC single phase 230 Volts, non metallic type, complete with louver including necessary electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall to fix exhaust fan and making good the disturbed portion wall to match with the existing surface of wall complete all as specified and directed by Engineer-in-Charge. Make : Havells Model: Ventil Air-DX white or other equivalent in /Bajaj/Crompton

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of earth chamber in PCC 1:3:6 type C1 and 40 mm thick chamber cover in RCC 1:2:4 type B1 reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

Supply, laying and testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor cable of size 4 core x 10 Sqmm laid in pipes, trenches ,ducts, on poles etc complete all as specified and directed.

Supply and lay GI pipe 'light grade' 40 mm bore with fittings in trenches /under floors or roads/ along poles/ on wall including required clamps as in protection of cables complete all as specified

M&L for clean and dry sand (un-washed) in trenches including spreading and leveling as a cushioning for UG cable complete all specified

M&L for bricks slightly over burnt (kiln burnt) , modular bricks , best quality, locally available , laid flat in trenches along the length of cable transversely with width equal to length of brick for cable protection all as specified

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors etc. complete all as specified

Taking down ceiling fan / exhaust fan of any sweep by disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface /concealed /existing conduit of any height and making good the disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable distribution board SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc by disconnecting the electric connection carefully and making good to disturbed surface complete all as specified and directed

S&F Modular Switch , single pole, one way, and 5/6 Amp single module

S&F Modular Switch , single pole, one way, and 15/16 Amp single module

S&F Bell push modular 6 Amps single module

S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified.

S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified

S&F Modular fan regulator step type, 2 module type Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F Decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminum extruded with end caps complete all as specified and as directed. Make: Havells Cat No LHEXACP7IN1W010 or other equivalent make in Wipro /Philips.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed .Make: Bajaj Cat No ENXT P 36L WH CR PC SD or other equivalent make in Philips, Wipro ,Havells

M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25/32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge.- Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit

S&F double door TPN DB's 04 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified Make : HPL/L&T/Havells

S&F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

M&L for refixing the celing fan / Exhaust fan obtained from item No 141 above including providing PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including overhauling the fan, painting complete fan with two coats of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

M/s Himgiri construction (BID ID -3093100)

M/S Sunshine Construction (BID ID -3093053)

J B CONSTRUCTION AND DEVLOPERS (BID ID -3092808)

sunway associates (BID ID -3093037)

ss construction (BID ID -3098844)

APconstruction (BID ID -3099021)