REPLACEMENT OF TOILET BLOCK OF BUILDING NUMBER P209 AND OTHER PROVISION WORK AT BRICHGUNJ MILITARY STATION UNDER GE BRICHGUNJ

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas exceeding 1.5m deep n exc 3.00M and getting out in any type of soil complete all as specified and directed.

M&L for Reinforcement cement concerete M-30 (desing mix) grade using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and mass concrete complete all as specified and directed.

Use & waste of Form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar works including attached pilasters, buttresses, etc for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for applying two coats cement base paints over one coat of alkali resistant priming paint on newly plastered wall surfaces including preparation complete all as specified and as directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Loose filling with aggregate of broken bricks or boulders of gauge 80 to 150mm in soakage pits, soakage wells, etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-30 in lintels over 1.5m clear span, beams and cantilevers complete all as specified and directed..

Use & waste of Form work to sides & soffits of lintels over 1.5m clear span, floor or roof beams, cantilevers, etc for fair finished flat surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 05mm thick in cement mortar 1: 3 on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in two coats on faces of brick work or concrete surfaces; first coat (rendering coat) of 10 mm thick in cement mortar 1: 6 and second coat (finishing coat) of 5 mm thick in cement mortar 1: 4 mixed with water proofing compound (water proofing compound to be measured separately as supply only) and finished even and smooth complete all as specified and directed.

Supply only Integral water proofing compound.

M&L Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over chalk whiting including primer complete all as specified and directed.

M&L Preparation of Newly Plastered surfaces of ceiling and applying Two coats of Oil Bound Distemper over chalk whiting including primer complete all as specified and directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed..(Make Apex Ultima)

M & L For Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Glazed Ceramic Coloured tiles 300x600x8 to 10mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match all as specified and directed including backing coat 10mm thic in CM 1:6 complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F 100mm Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and directed.

S&F 200mm Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and directed. .

S&L of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all as specified and directed for following:- (a) Outer diameter of pipe in 20 mm

(b) Outer diameter of pipe in 25 mm

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including taking down and connecting up pipes complete all as specified and directed.

S&F in repairs 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed.

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and directed.

S&F in repairs looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed.

S&F in repairs Chromium Plated Steel Grating of 100mm size complete all as specified and directed.

S&F in Repairs Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipewith connecting Assoceries complete all as specified & directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified & directed.

S&F in repairs 2 Way Bib Cock Double handle with flange 15 mm bore cast copper alloy Chromium plated with wall flang, screwed down, screwed for pipes complete all as specified & directed. (Make:- Prayag Cat No -8312 or Equivalent)

S&F as in repair Health Faucet 1 Meter Long Flexible Tube & Hook complete all as specified & directed. (Make:- Jaquar Cat No ALD CHR -585)

S&F in repairs Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified & directed.

S&F in repairs shower arm 190mm long light body with wall flange and exclusive shower single flow with revolving ball joint as per cat. No.477 / 493 of make Jaquar complete all as specified & directed.

S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified & directed.

S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified & directed.

S&F in repairs 100 mm CI Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified & directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor complete all as specified & directed.

S&F in repairs 75mm dia outlet PVC (SWR) floor trap,plain with grating incl joining with solvent cement complete all as specified & directed.

S&F in repairs PVC (SWR) Gully 125/110 mm,seting and incl joining with solvent cement complete all as specified & directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls, laid in floors and in weep holes complete all as specified & directed.

S&F in repairs 75mm dia PVC (SWR) bend with oval access door complete all as specified & directed.

S&F in repairs110mm dia PVC (SWR) bend with oval access door complete all as specified & directed.

S&F in repairs PVC (SWR) cowls 75mm dia complete all as specified & directed.

S&F in repairs PVC (SWR) cowls 110mm dia complete all as specified & directed.

M&L for concrete bed to drain pipes 110mm bore including forming cradles; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, etc., all as specified and as directed for the following:-. (a) One light point/Exhaust fan controlled by one way switch

(b) One 3 pin switch socket outlet point 5 amps on independent board.

All as per item at sl No.71.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm earth continuty conductor, complete all as specified and as directed.

Supply and fix of switch piano flush type single pole one way 5 Amp complete all as specified and directed. .

Supply and fix switch socket combination 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed.

Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specfified and as directed.

S & F LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specfified and as directed.

S&F Street light New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs 35 w as light and electronic driver complete all as per with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete all as specfified and as directed.

Supply and fix exhaust fan steel body suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specfified and as directed.

P Babu

Bismi Builders & Enterprises

DEEPAK AGENCIES