Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC 22A ASWINI DUTTA ROAD KOLKATA 700029 | KOLKATA | WEST BENGAL | 700029 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹29.2 L+₹30,743.50 (1.06%)Rejected-Finance 60 4 MOTILAL GUPTA ROAD GROUND FLOOR KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹60.7 L+₹31.8 L (110.2%)Rejected-Finance P 45 JOGENDRA GARDEN KOLKATA 700078 | KOLKATA | WEST BENGAL | 700078 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
10 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR MAINT OF B/R EXTERNAL SERVICES AT BLDG NO P-121, MP (O-1 AND 2), PF COMPLEX AND F-10 COMPLEX UNDER GE (FW) KOLKATA
2023_MES_605723_1
8146/E8
Open Tender
Civil Works
Item Rate
150 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹70,000
6 Oct 2023
26 Jun 2023
11 Aug 2023
26 Jun 2023
10 Aug 2023
22 Jul 2023
Amount
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MOD land and disposed off complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed.
Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including roof coverings, complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC), any section, embedded in natural ground, including taking out embedded portion and making good disturbed ground, complete all as directed.
Dismantling posts or struts (wood, steel or RCC), any section, embedded in concrete, brick work, masonry etc., including taking out embedded portion and making good disturbed ground, complete all as directed.
Dismantling of old chain link wire mesh fencing including flat iron, mild steel round supporting bars, bracing bar etc., complete all as specified and directed.
Excavating in post hole (or similar hole) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil complete all as specified and as directed.
M&L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M&L PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) in Foundation, filling and mass concrete, complete all as specified and as directed.
S&F in repair 35 mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement mortar 1:4, including dismantling of existing jallie complete all as specified and as directed.
M&L brick work with sub class'B' fly-ash bricks, straight or curved on plan exc 6m radius built in cement mortar 1:6 complete all as a specified and as directed.
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:4, finished fair & even & smooth without using extra cement, all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:6, finished fair & even & smooth without using extra cement, all as specified and directed.
Use and waste for form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed
M&L for RCC 1:1½:3, type A1 (nominal mix) (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed. (Note: Reinforcement to be measured and paid separately).
M&L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. (Note : Reinforcement to be measured and paid separately).
M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.
M&L TMT Bars 6 - 8 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.
M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
M&L for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for, complete all as specified and directed.
M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe 410-W (Gde-E- 250) quality-B (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
M&L Mild steel framed work such as grills of ornamental type, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.
S&F MS angle, flats, etc., independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250) quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed.
Re-fixing of RCC post or angle iron post complete all as specified and as directed.
M&L Mild Steel Screw Bolts (machine made) 5mm to 10mm diameter of neck and length of bolt exc 5 Cm and not exc. 10 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.
S&F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape required, complete all as specified and as directed
S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
S&F in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., incl dismantling of existing barbed wires complete all as specified and directed. (Note: Each line of wire will be measured)
S&F 4mm dia PVC coated galvanised mild steel chain link fencing of mesh size 50x50mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and as directed.
Re-fixing of old serviceable chain link fencing (Chain link fencing obtained from item No 08) including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
M&L cement concrete type C2 (1:3:6) using 40 mm graded stone aggregate, 75 mm thick as in plinth protection, laid in alternate bays, finished even and smooth without using extra cement, complete all as specified and directed.
M&L 25mm thick cement concrete type B-0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor. complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) in Foundation, filling and mass concrete complete all as specified and as directed.
M&L for PCC 1:2:4 Type B1 (using 20 mm graded stone aggregates) as in forming channel, benching inside manholes (1/2 or 3/4 section) in manholes and as in coping incl necessary formwork complete all as specified and directed.
M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc completed all as specified and directed.
S&F RCPC (Reinforced Cement Polymer Concrete) grating slab of size 900 mm x 450 mm x 75 mm thick, of Capacity 5 MT fixed in proper position complete as directed by Engr-in -Charge.
S&F RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 75 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Supply and fixing 25 mm thick pre-polished decorative cement concrete tiles of size 300mm x 300mm, as in flooring over and including 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed by Engineer-in-Charge.
M&L 25 mm thick pre polished coloured chequered tiles of size 300mm X 300mm, jointed & pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over & incl 20 mm thick screed bed in cement mortar 1:6, complete all as specified & directed.
Supply and laying 60mm thick factory made chamfered edge precast glazed cement concrete paver block of M-50 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
S&F 15mm thick pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces over and including 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed. Make: Multiwyn/Ultra or Equivalent as approved by GE
M&L 18 to 20 mm thick White marble work, makrana white, (table rubbed and polished) in steps, jambs, pillars , window cills etc, set and jointed in neat cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L for 18 to 20 mm thick Green marble work ( table rubbed and polished) in steps, jambs, pillars , window cills etc, set and jointed in neat cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L for 18-20 mm thick coloured granite slab, machine cut as in vertical surfaces such as skirting/dado over and including 10mm thick backing layer in cement mortar (1:3), set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including rubbing and polishing complete all as specified and as directed.
M&L 18-20 mm thick coloured granite tiles, machine cut as in steps, jambs, pillars, window cills, cooking platforms and on floor over and including 20mm thick backing layer in cement mortar (1:6), set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including rubbing and polishing complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid on floor over and including 20mm thick backing layer in cement mortar (1:6) complete all as specified and as directed.
Material and labour for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazzo, granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.
S&F in repairs anti-rust concertina coil (reinforced punched barbed tape single layer) for fencing work incl taking down existing coils complete all as per following specifications :- (i) Diameter of concertina coil - 750 mm dia (before stretch) (ii) Number of turns in concertina - 50 turns (iii) Weight of each coil - 10.5 KG (iv) Coverage per coil - 8 m (v) Central core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05 mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm+ 0.2 mm
Item No. 55.00 (Contd....) (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire, 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - minimum 125 for each coil (ix) Handle and spikes to be provided as required (NOTE : 1. The concertina coil shall be given additional primer treatment of epoxy/ polyurethane and final paint top coat of caufiled green shade (BSL 139) by hot dipping process. 2. RBT wire for fixing of concertina coil will be measured and paid separately. 3. Running length of the wall shall be measured for payment purpose.
Supply only epoxy/polyurethane coated RBT wire of high tensile strength of 165 kg/sqmm with tape (0.52 mm thick) and weight complete all as specified and directed.
M&L for taking down plants/vegetation from wall upto roof level by means of cutting holes into brick wall and making good the surfaces of dismantling portion n.exc 150Sqcm superficial area and n.exc on brick deep by PCC 1:3:6 type C1 (using 20 mm graded stone aggregates) and plastering in cement mortar (1:4) of disturb portion and applying two coats of cement based paint over a coat of primer to match the existing surfaces height upto 7.50 metre height complete all as specified and directed.
All as per item No.57.00 above, but for height beyond 7.50 metre to 10.50 metre height.
All as per item No.57.00 above, but for height beyond 10.50 metre to 14.0 metre height.
Material and Labour for applying 1.0 mm thick wall putty on new surface of wall complete all as directed.
Material and Labour for removal of existing treatment and applying 1.0 mm thick wall putty on surface of wall complete all as directed.
M&L Preparing old decorated plastered surfaces of walls and applying One Coat of Plastic/Acrylic Emulsion Paint over 10 cm width or girth , complete all as specified and as directed.
M&L Preparing old decorated plastered surfaces of walls and applying Two Coats of Plastic/Acrylic Emulsion Paint over 10 cm width or girth , complete all as specified and as directed.
M&L Preparing old decorated plastered surfaces of Ceiling and applying One Coat of Plastic/Acrylic Emulsion Paint over 10 cm width or girth, complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L for complete removal of existing treatment of old decorated plastered surfaces or un-plastered surfaces of walls and soffit of chajjas, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc., and applying Two coats of cement based paint with brush, complete all as specified and directed .
M&L for complete removal of existing treated surfaces of walls and soffit of chajjas, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc., and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and soffit of chajjas, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc., finishing the surface and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, n exc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L preparing old surfaces of brick, stone, concrete, asbestos cement surfaces or plastered surfaces of any description and applying one coat of synthetic enamel paint over complete all as directed.
M&L Preparing old Wooden Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed.
M&L Preparing old Steel Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed.
M&L for One or more coats of French polishing on old wooden surfaces of any description, width or girth including cleaning and scrapping the same by machine paper, sand paper of different grades , water paper etc, filling of stop/ bore holes with putty and French chalk as required quantity to achieve a glossy surface to the complete satisfaction of Engineer-in-Charge complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150 mm set in cement mortar complete all as specified and directed.
Supply and laying 150 mm bore Salt glazed stone ware pipe, laid in trenches and jointed in CM 1:4, complete all as specified and as directed by the Engineer-in-Charge.
M/L for PCC (1:3:6) type C2 using 40mm graded broken stone aggregates for bed concrete to drain pipe packing under haunching for sides for 150 mm dia pipe lines complete all as specified and as directed.
Removing blockage of WC, Wash hand basin, floor/nahani trap, gully trap and junctions of soil waste & vent pipe etc. manually for day to day complaint with the help of vacuum pump or rodding for complete satisfaction of users including opening and re-fixing of CI eye cover to bend and branch piece (Tee bend) and finally cleaned with water to make the Job functional in any location and in any position of building complete all as specified and directed. Notes : (i) The contractor has to depute 1 no skilled sweeper for the specified area daily from 8:30 AM to 5:00 PM. (ii) Disposal of sludge obtained shall be disposed of in pit made by contractor and shall be covered with soil duly disinfected with adequate qty of bleaching powder. Quoted rate shall deemed to inclusive of the above aspect. No claim shall be entertained at a later stage.
Desilting of blockage/blocked Manhole of any size and depth including disposal of rubbish/sludge and making good complete all as specified and directed. Notes : Disposal of sludge obtained shall be disposed of in pit made by contractor and shall be covered with soil duly disinfected with adequate qty of bleaching powder. Quoted rate shall deemed to inclusive of the above aspect. No claim shall be entertained at a later stage.
Cleaning of existing covered/un-covered drains of any section and depth removal of sludge, rubbish and other foreign material and flushing with adequate quantity of water and deposit the sludge to a distance not exc. 50m all as specified and directed. Note : Disposal of sludge obtained shall be disposed of in pit made by contractor and shall be covered with soil duly disinfected with adequate qty of bleaching powder. Quoted rate shall deemed to inclusive of the above aspect. No claim shall be entertained at a later stage.
Cleaning of rain water/waste pipe of any dia by rodding or by bamboo splits including removing and refixing of eye cover in existing position etc. complete all as specified and directed. Note : Disposal of sludge obtained shall be disposed of in pit made by contractor and shall be covered with soil. Quoted rate shall deemed to inclusive of the above aspect. No claim shall be entertained at a later stage.
Cleaning of all debris/vegetation over roof surfaces of accessible or un-accessible roof portion upto any height and the mouth of rain water pipe and around the tanks area and removal of materials out side the MOD land including necessary scaffolding and safety measures complete all as specified and directed.
Pumping out of sewage water through mechanical pumps from Septic tank/soak well/sump well of any capacity where required and as directed with taking precautionary measures including tools & plants as required and removing to distance exceeding 50 m but not exceeding 100 m from the site complete all as specified and directed.
Cleaning of existing 150 mm dia sewage line upto 1.00 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi-liquid/solid sludge etc passing to the next manhole and the line properly cleaned with water for effective functioning complete all as specified and directed.
Cleaning of existing 150 mm dia sewage line upto 1.50 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi-liquid/solid sludge etc passing to the next manhole and the line properly cleaned with water for effective functioning complete all as specified and directed.
Cleaning of existing 200 mm dia sewage line upto 1.50 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi-liquid/solid sludge etc passing to the next manhole and the line properly cleaned with water for effective functioning complete all as specified and directed.
Cleaning of existing 300 mm dia sewage line upto 1.50 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi-liquid/solid sludge etc passing to the next manhole and the line properly cleaned with water for effective functioning complete all as specified and directed.
Cleaning/de-silting of under ground sewage line of dia exceeding 300mm but n. exc 450 mm dia of pipe by mechanical van with necessary safety protection on main road from hoogly view to Khidderpur road Jn ( work in night only) and taking out soil waste sludge or foreign material from sewage line and flushing with adequate quantity of water for smooth functioning of sewage line including removal of sludge/debris from site, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of bituminious road surfaces and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc., and like n exc 10 cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine, all as per manufacturer instruction, complete all as specified and directed by Eng-in-charge.
S&F 110mm bore PVC (SWR) Soil / RWP pipes single socketed in any length with rubber ring joints fixed to wall including necessary scaffolding upto any height complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends including necessary scaffolding upto any height complete all as specified and directed.
Providing and fixing double steel scaffolding system (cup lock type) on the exterior side of shaft portion (only) of building of any height including additional rows of scaffolding in stepped manner as per requirement of site, made with minimum 40mm dia M.S. Tube, placed 1.5 metre centre to centre (maximum), horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. Tube challis, M.S. Clamps and staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for execution of work and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of GE. Notes:- (1) The elevational area of shaft portion of building (length/breadth of shaft X height of shaft) covered with scaffolding shall only be measured for payment purpose. (2) The payment shall be made for one time only for execution of all items of each face of shaft portion of building. (3) After completion of work all scaffolding materials shall be removed from building /structure by the contractor and the same shall be the property of the contractor and accordingly rate shall be quoted.
Cleaning of Manhole chambers and sewage lines of any size, aly depth each, mechanically, removing muck / sludge / silt / mud, liquid etc., under any position including foul condition and cleaning the inlet and outlet with water, with precautionary measures with high pressure jet machine with super sucker machine incl all tools and plants, machine operator and labour for complete day (i.e. 8 Hours), placing back the manhole cover in position and disposing off the sludge / debris out of MOD land, complete all as specified and directed. NOTES:- (1) The sludge / debris shall be disposed off in sealed containers or sludge removal tankers. Contractor is expected to consider this aspect while quoting his rates. No claim, whatsoever, shall be entertained on this account afterwards. (2) Mechanised cleaning vehicle, water jetting machine including fuel and operator, as and when ordered by the Engineer-in-Charge shall be provided by the contractor under his own arrangement. No extra claim shall be admissible during currency of work.
Removal and disposal off of waste material / debries like broken stones, brick bats, tiles etc.,/ Soils in any position, from Fort William Camp area to out of MD land as any location catered by KMC, complete all as specified and directed by Eng-in-Charge. Note: Volume of each laod / trip shall be considered for 4 Cum as Each load / Trip.
M/S BISWANATH BHATTACHARJEE
HYDROTEC
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .