Construction Of Additional Office Building With Training Hall In The First Floor Of Cdvo Office Deogarh In Deogarh Municipality

Ground Floor

R.C.C. in CC (1:1½:3) with clean hard broken granite chips of 12 mm size consistent with strength and strengthen cover of concrete, of approved quality and from approved quarry mixing with concrete mixture & laying mannually including hoisting with and laying concrete in layer not exceeding 15cm in depth to the required thickness and compacting as per the direction of the Engineer-in-charge including rigid & smooth centering , shuttering , watering and curing for four weeks and finishing the exposed surface smooth with cost, conveyance, taxes and royalities and taxes of all materials, labour T & P, hire and running charges of machineries required for the work, but excluding cost,conveyance, of M.S/T.S Rods and direction of Engineer-in-charge. FIRST FLOOR, Lintle Bend

Columns & Beam

Slab & Chajja

Supplying,straightening, cutting, bending, binding, cranking, hooking, and jointing, (if required) the HYSD rod and tying the grills, hoisting and placing in proper position as required for R.C.C. works including cost, conveyance and all taxes of HYSD. rods and binding wires of 18 to 20 gauge with cost of labour and T & P required for the work etc. complete in all respect as directed by the Engineer-in- charge. FIRST FLOOR

Fly ash brick massonary of size 23 cm x 12cm x 8cm in cement mortar (1:6) in superstructure including cost, convayancy & royalty etc. complete. FIRST FLOOR

20 mm thick cement plaster in C.M (1:4) over roof slab including cost, convayancy & royalty etc. complete. SECOND FLOOR

16 mm thick cement plaster in C.M. (1:6) over brick work (inside walls), after raking out joints finished smooth including watering and curing, cost conveyance royalty and all taxes of materials with cost of labour and T & P etc, required for the work complete in all respect. FIRST FLOOR

12 mm thick cement plaster in cement mortar (1:6) over stone masonary finished smooth including watering and curing, cost conveyance royalty and all taxes of materials with cost of labour and T & P etc, required for the work complete in all respect. FIRST FLOOR

Fixing vetrified tile in floors, trade or steps & landing on 25 mm thick cement plaster (1:1) jointed with neat cement slurry mixed with pigments to match the shade of the tiles rubing and polishing etc. Complete FIRST FLOOR

Fixing ceramic tile in floors, trade or steps & landing on 25 mm thick cement plaster (1:1) jointed with neat cement slurry mixed with pigments to match the shade of the tiles rubing and polishing etc. Complete FIRST FLOOR

Fixing of tiles of approved shade and design over 12 mm thick cement plaster (1:3) over brickwork for dadoes, finished smooth with proper thickness, watering, curing for seven days with cost conveyance, royality, taxes of all materials, labour etc complete. FIRST FLOOR

Supplying fitting fixing M.S. shutter and m.s grill for door & windows including all cost, conveyance and taxes of all materials and labour charge etc. complete in all respect as per direction of Engineer-in-Charge.

Finishing wall surface of wall with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive charges with cost of all materials taxes, labour T&P etc complete. FIRST FLOOR

Distempering two coats to wall with distemper of approved shade on new work to give on even shade including cost of distemper FIRST FLOOR

Weather coating two coats to the wall with approved shade over a coat of wall primer on new work to give on even shade including cost of weather conveyance, taxes of all materials, labour etc complete. FIRST FLOOR

Suppying fitting , fixing fully glazed aluminium framed openable windows using 15 mocron anodised OEL aluminium section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminium angle , rubber beading friction stay and handle etc. with 5mm black glass. FIRST FLOOR

Providing fitting ,fixing,of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame to be completed by means of jointing angle No. 1855 including all cost of labour,T&P hire charges of drilling machine, labour charges etc complete. FIRST FLOOR

Please Enable Macros to View BoQ information