PETTY REPAIR OF B/R WORKS AND REPAIR/MAINT OF SEWAGE SYSTEM INCL DRAIN WORK, MANHOLE COVER, PATH ETC INSIDE COD KANPUR UNDER AGE B/R-I OF GE (I) KANPUR CANTT

Amount

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee union,reducer, nipple long screw both end complete etc for 15 mm bore pipe (ISI marked) complete all as specified and directed.

All as per item No 1.00 above but for 20 mm bore pipe complete all as specified and directed.

Repair to stop valve (concealed) type 15 mm dia by replacing face or spindle of suitable size complete all as specified and directed.

S&F in repairs brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed.

S&F in repairs PVC syphon with handle for low level flushing cistern of any description size and pattern complete all as specified and directed.

S&F in repairs PVC handle for low level flushing cistern of any description size and pattern complete all as specified and directed.

Petty repairs / adjustment to washer / syphon etc for high level or low level flushing cistern and making functional complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing only old steel tubing 15 mm dia of bore and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing only old steel tubing 20 mm dia of bore and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white color (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank of capacity exc 250 and n.exc 500 liters capacity from circulated pipe without damaging of existing float valves including stampring by stencil of date of cleaning by removing old writing complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank of capacity exc 500 and n.exc 1000 liters capacity from circulated pipe without damaging of existing float valves including stampring by stencil of date of cleaning by removing old writing complete all as specified and directed.

S&F in repairs PVC water tank cover capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed.

S&F in repairs PVC water tank cover capacity exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm dia iron pipe (min wt 142 gram) complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm dia iron pipe (min wt 142 gram) complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm dia iron pipe (min wt 210 gram) complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm dia iron pipe (min wt 210 gram) complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 25 mm dia iron pipe (min wt 210 gram) complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 25 mm dia iron pipe (min wt 210 gram) complete all as specified and directed.

S&F in repairs 15mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1 mm thick stainless steel sheet for kitchen and fixed with plugs, washers and waste pipe including fixing on cast iron cantilever brackets and connecting union to pipe over all size 1000 x 510 mm and bowl size 460x410x200 mm complete all as specified and directed.

S&F in repairs Plate rack made out of 1mm thick stainless steel of size 75cmx60cmx25cm with all internal fittings weight not less than 8.20 Kg as approved by Engr-in-Charge complete all as specified and directed.

S&F in repair vitreous china WHB white flate back size 550x400mm including supplied and fixed angle iron brackets, including chromium plated pillar tap 15 mm bore fancy type,CP waste coupling 32mm dia, & PVC connection 450mm complete all as specified and directed.

S&F in repair looking Mirror screwing with high quality screw (size 450x600 x 6mm thick fixed with chromium plated spacers 25 to 30mm size (one each corner) including rounding the edges complete all as specified and directed.

S&F in repairs PVC bath room cabinet of size 535mm x 483mm x 110mm with mirror complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa pattern' size 580x440mm white with integral foot rests any pattern and making connection with & including CI P/S Trap, etc complete all as specified and directed.

S&F in repair vitreous chinaware EWC water closet pan (Padestal pattern), white with and including white seat & cover with flat bottom with CP hinging device complete all as specified and directed.

S&F in repairs vitreous china urinal bowl type angle back size (430 x 370 x 340) mm white grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in CM (1:2) including 60mm brass screws complete all as specified and directed.

S&F in repair MS angle iron 40mmx40mmx6mm bracket of size 45cm for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed.

S&F in repair EWC seat cover coloured with all fixing arrangement suitable for cascade type EWC of any make & pattern complete all as specified and directed.

S&F in repair white plastic water closet seat cover closed pattern with flat bottom and aluminium hinging device complete all as specified and directed.

S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float ball valve and handle incl brackets, PVC connection 300mm with flanges at both ends screwed down to 15mm bore pipe and 32mm bore PVC flush pipe of required length incl taking out of existing flushing cisterns complete all as specified and directed.

S&F in Repair flushing cistern kit for cascade type EWC of any pattern and description complete all as specified and directed.

S&F in repairs brass, chromium plated toilet paper holder complete all as specified and directed.

S&F in repairs Chromium plated brass soap dish/ tray fixed with wall complete all as specified and directed.

S&F in repairs 15mm bore cast copper alloy chromium plated fancy type long body bib tap with capstan head, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore cast copper alloy chromium plated fancy type short body bib tap with capstan head, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore CP fancy type bib tap two way with capstan head fixed complete all as specified and directed.

S&F in repair 15mm dia bore Chromium plated sink cock swivel type complete all as specified and directed.

S&F in repairs 15 mm dia bore Stop valves chromium plated, fancy type with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair Angular stop cock 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F in repair angular stop cock two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F in repairs pillar taps fancy type (ISI marked) cast copper alloy chromium plated with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair stainless steel L-type toilet jet spray with flatted end nozzle including 1.0 mtr SS huge pipe 15mm bore complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed.

S&F in repair 15mm dia bore wall mixer with connecting legs flanges and wall bracket for hand shower complete all as specified and directed.

S &F 15 mm dia bore fancy type Single lever Basin mixer with popup waste system & 450 mm long braided hose complete all as specified and directed.

S&F15mm dia bore brass Chromium plated sink mixer complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed.

S&F in repair corner glass shelf 25 cm radius with CP bracket and railing of approved quality complete all as specified and directed.

S&F in repair glass shelf size ( 600X100) with CP bracket and railing of approved quality complete all as specified and directed.

S&F in repair CP grating 75 mm dia round fixed with white cement complete all as specified and directed.

S&F in repair CP grating 100 mm dia round fixed with white cement complete all as specified and directed.

S&F in repair CP grating 125 mm dia round fixed with white cement complete all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe for WHB & sink 80 cm long with union complete all as specified and directed.

S&F in repairs 40 mm dia PVC waste pipe for sink 80 cm long with union complete all as specified and directed.

S&F in repairs waste coupling brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed.

S&F in repairs waste coupling brass chromium plated 40 mm dia for steel sink complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450mmm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 600mmm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

Taking down 100/ 110 mm dia rain water pipes, any pattern with all fittings & bends etc complete all as specified and directed.

S&F (SWR) PVC Pipe 110 mm pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm dia , PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore complete all as specified and directed.

S&F in repairs MS clamp for CI/PVC pipes 100/110 mm bore made out of 50 x 5 mm flat and 16 mm dia round bars including bolts and nuts including securing to wall in PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate and making good in cement mortar (1:3) complete all as specified and directed.

Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges by necessary drilling/welding, adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

Taking down shutters of any description exceeding 2 Sqm each, easing , cutting and adjusting shutters and refixing in the same opening complete all as specified and directed.

All as per item No 79.00 above but exc 1 Sqm but not exceeding 2 Sqm complete all as specified and directed.

Repair to aluminum door shutter of any description including taking down and refixing with necessary adjustment to door spring/door closer, aluminum/rubber beading, glass pane etc complete all as specified and directed.

S&F in repair butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

S&F in repair butt hinges medium weight cold rolled mild steel 75mm long complete all as specified and directed.

S&F in repair continuous (piano) hinges mild steel bright finish or electro galvanised with flaps when open 40mm complete all as specified and directed.

S&F in repair aluminium alloy anodised sliding door bolt with hasp & staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 300mm size complete all as specified and directed.

S&F in repair aluminium handles cast type ,anodised of 150 mm size complete all as specified and directed.

S&F in repair aluminium handles cast type ,anodised of 125 mm size complete all as specified and directed.

S&F in repair aluminium, anodised barrel tower bolt of extruded section of 150 mm long complete all as specified and directed.

S&F in repairs mortice lock vertical type size 100mm 2 levers of brass complete all as specified and directed.

S&F in repair mild steel 300mm ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed.

Supply & Fixing in repair of floor door stopper of Aluminium body & tongue over all length 140 mm aluminium with hard drawn steel spring complete all as specified and directed.

S&F in repair door closer hydraulically regulated (aluminium dia cast) designation No. 3 universal type suitable for door shutter of 851 to 1000mm width and of wt between 61 to 80 Kg complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aliminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with wooden beads to wooden joinery complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description ) from steel or wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3.0 mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as specified & directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs fancy type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. (Note : Debris obtained from dismantling will be removing outside of MOD land)

Demolation of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC (1:2:4 ) type B-1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using of extra cement laying in alternate bay complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C1(using 20 mm graded stone aggregate) as in plinth protection finished even and smooth wihtout using extra cement complete all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, set, jointed over and including 25 mm thick sand cushoning complete all as specified and directed.

M&L fo repair Chequered cement concrete tiles 20cmx20cmx25mm thick with grey cement and pigment in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 108.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.

M&L for non skid ceramic colour tiles joint free 7 to 8 mm thick (Square /rectangle) area of each tile excedding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and ponted in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for 15 mm thick rendering in patches including taking down, n.exc. 1.0 sqm in CM (1:6) on fair faces of concrete or brick surface finished even and fair without using extra cement and two coats of Oil bound distemper over a coat of primer and wall care putty for getting smooth surface matching with existing coloured sufaces complete all as specified and directed. (Note :- Rate including all necessary scaffolding arrangment up to Ht 6.00 m )

M&L for 15 mm thick rendering in patches including taking down, area of each patch n exc 1.0 sqm in CM (1:4) on fair/unfair faces of concrete or brick finished even and fair without using extra cement and two coats of Cement based paint matching with existing coloured sufaces complete all as specified and directed. (Note :- Rate including all necessary scaffolding arrangment up to Ht 6.00 m)

M&L for 15 mm thick rendering in patches including taking down, area of each patch exc 1.0 sqm but n.exc. 2.0 sqm in CM (1:4) on fair/unfair faces of concrete or brick finished even and fair without using extra cement and two coats of Cement based paint matching with existing coloured sufaces complete all as specified and directed. (Note :- Rate including all necessary scaffolding arrangment up to Ht 6.00 m)

S&F in repairs fancy type bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed (min wt 90 gms) complete all as specified and directed.

S&F in repair fancy type pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 110gms) complete all as specified and directed.

S&F in repair angle stop valve 15 mm bore of PTMT of any colour high pressure screwed for iron pipe and fixed (min wt 90 gms) complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40 gms) complete all as specified and directed.

M&L for Cleaning/removal of blockage of floor traps/nahani traps of 75 mm/ 100mm bore in kitchan/bathroom/toilets etc up to 1st manhole including of PVC/ Stainless trap grating and refixing the same with white cement with pigment to match the surface as before or any other associated /related complains not mention under this item and will be done complete all as specified and directed. Note for Item No : The Traps shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

M&L for Cleaning /removal of blockage of Gully traps up to 1st manhole of any size and any depth including removing RCC covers and refixing the same as before or any other associated /related complains not mention under this item and will be done complete all as specified and directed. Note for Item No : The Gully Trap shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

M&L for Cleaning /removal of blockage of Orissa pattern WC 'P'/'S' traps and make functional up to 1st manhole or any other associated /related complains not mention under this item and will be done complete all as specified and directed. Note for Item No : The WC shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

M&L for Cleaning /removal of blockage of Europian type WC 'P'/'S' traps and make functional up to 1st Manhole or any other associated /related complains not mention under this item and will be done complete all as specified and directed. Note for Item No : The EWC shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

M&L for Cleaning /removal of blockage of Europian type WC 'P'/'S' traps including removing EWC and cleaning the taps completely and make functional and rifitted the EWC in same position including making good the distrubed surfaces with the help of white cement and pigment to match the existing surface or any other associated /related complaints not mention under this item and will be donecomplete all as specified and directed. Note for Item No : The EWC shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

M&L for Cleaning /removal of blockage up to 150 mm bore SWG/RCC pipes including manhole of depth not exc 1.00 mtr using Mechanized / Mechnical means incl removing RCC man hole covers and refixing the same as before complete all as specified and directed. Note : Length will be measured from previous manhole to subsquent manhole in RM for payment purpose after satisfaction of Engr-in- Charge

M&L for Cleaning /removal of blockage up to 150 mm bore SWG/RCC pipes including manhole of depth exc 1.00 mtr but not exc 2.00 mtr using Mechanized / Mechnical means incl removing RCC man hole covers and refixing the same as before complete all as specified and directed. Note : Length will be measured from previous manhole to subsquent manhole in RM for payment purpose after satisfaction of Engr-in- Charge

M&L for Dewatering/desilting of existing manholes of any size, depth n.exc 1.00m and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system) and incl removing RCC manhole Covers and refixing the same after cleaning the same position complete all as specified and directed.

M&L for Dewatering/desilting of existing manholes of any size, depth exc 1.00m but n.exc 2.00m and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system) and incl removing RCC manhole Covers and refixing the same after cleaning the same position complete all as specified and directed.

M&L for Dewatering/desilting of existing Septic Tank/Soakage Well incl removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system) or using suction pump where ever required up to any depth by working under foul conditions and disposal of the same in out of MoD area, complete all as specified and directed (mode of measurement shall be sludge in wet condition). Note for Item No - : The Septic tank shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l using 20mm graded stone agg smooth finished, and reforming benching as required for 150 mm bore pipe complete all as specified and directed.

Demolition of RCC (reinforced cement concrete) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl removing demolished material from site complete all as specified and directed.

M& L for providing precast cement concrete in 1:2:4 type B1 (using 20 mm graded stone aggreate) as in manhole cover slabs complete all as specified and directed.

M&L for Mild steel TMT bars 8 mm dia & over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified and directed.

M&L for brick work with subclass B old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

M&L Plain cement concrete ( 1:2:4), type B-1, (using 20 mm graded stone aggregate) as in coping, bed plates & other similar works, including necessary form works wearthering, slightly rounded angles and theading complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair/unfair faces of brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed.

Dismantling of cast iron drain pipe S&F fittings, jointed in cement mortar and taking out of trench required internal dia of pipe 75mm to 100mm complete all as specified and directed.

S&F 100mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears with cement joints fixed to walls / ceiling or laid in floor complete all as specified and directed.

S&F 75mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears with cement joints fixed to walls / ceiling or laid in floor complete all as specified and directed.

S&F in repairs CI Nahani trap 100m complete all as specified and directed.

S&F in repairs CI Tee 100mm bore pipe complete all as specified and directed.

S&F in repairs CI Tee 75mm bore pipe complete all as specified and directed.

S&F in repairs CI Cowls for 100mm bore pipe complete all as specified and directed.

Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness including cover fillets at any height complete all as specified and directed.

S&F of lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed.

Providing & Fixing Ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO .50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4 ) -1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications complete all as specified and directed.

M&L for providing PVC false ceiling consisting of 600mmx 600mm ,5mm thick plain PVC sheet of density 600 kg / cum used as a panel insert in a frame work made using anodised aluminium angle and 'T' section of size 25mmx25mm of 19 gauge or 1 mm thick a square pattern of a grid size of 600mmx600mm complete all as specified and directed. Note: Rate of aluminium frame work shall deemed to be included in this item.

S&F in repair 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roo, wall etc complete all as specified and directed.

Dismantiling of CGI/PGI sheets any thickness as in roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed.

Chandra Construction Company (BID ID -3474393)

M/S AADI ENTERPRISES (BID ID -3475060)

FATEHPUR CONSTRUCTION COMPANY (BID ID -3474177)

S.D.TRADERS (BID ID -3479254)