REPAIR TO AC SHEET, CGI SHEET, RIDGES, HIPS, VALLEY GUTTER AND WATER PROOFING TREATMENT AND MISC WORK AT FAD IN RESTRICTED AREA UNDER AGE B/R-II AT GE PANAGARH

Amount

Material and labour for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Material (except tubes) and labour for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down steel tubing and connections 15 mm bore . complete all as specified and directed.

S&F in repair Vitreous china Water closet (pedestal pattern) com plete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line, complete all as specified and directed.

S & F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding,including making good to existing (floor / Tiles). complete all as specified and directed.

S & F in repairs CP Stop valve, any description, suitable for 15mm bore pipe fixed as complete all as specified and directed.

Supply and fixing as in repair bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, complete all as specified and directed.

S&F in repairs 15 mm bib tap, cast copper alloy fancy type short body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs 15 mm bib tap, cast copper alloy fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply and Fix in repair stop valves, cast copper alloy , fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle,long shank and cup (concealed type), screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S&Fin repair waste coupling of PTMT(Half or full threaded), 32mm bore dia of discharge pipe (Min Wt 45gms), complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts,screwed for iron pipe and fixed,fancy type suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F in repair CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm) , complete all as specified.

Supply & fixing 500 litres capacity Rotational moulded polyethylene water storage tanks multi layer (cylindrical vertical with closed top with tripal layer) conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fittings complete all as specified and directed.

S&F in repair 15 mm bore Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes , ISI marked, screwed both ends for iron pipe, complete all as specified and directed.

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe and brackets complete all as specified and directed

S&F as in repair grating square with slit, with or without hole of PTMT (Minimum weight 100 gm) made in two parts for smell and mosquito proofing with 25 mm water seal fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, complete all as specified.

Supply and fixing as in repair PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.

Supply and fixing as in repair PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.

Supply and fixing as in repair 75mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc including dismantling of PVC rain water 75mm dia , complete all as specified and directed.

Supply and fixing as in repair 110mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc including dismantling of PVC rain water 110mm dia , complete all as specified and directed.

S&F as in repair Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 100 mm bore spun pipes, ISI marked,complete all as specified and directed.

S&F as in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes, complete all as specified and directed.

S & F in repair 32mm dia PVC waste pipe 800mm long for wash basin and sink , complete all as specified and directed.

S&F in repair seat cover for pedestral pan.complete all as specified and directed.

S&F as in repair Cast iron soil, waste and vent pipes, spun type 100mm ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, including dismantling of cast iron pipes with all fittings and fixing acessoriescomplete all as specified.

S & F as in repair Viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth.complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as in plinth protection/floor including finishing surface even and smooth without using extra cement complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L for providing 40 mm thick PCC (1:2:4) Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement ,complete all as specified and directed.

S & F 38 mm wide and 3 mm thick glass dividing strips as in flooring and inserted in position conform to design .complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:1.5:3 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girder,bressummers, lintels, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x600x7mm thick skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10 mm thick rendering in cement mortar (1:4) , including dismantling of floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed complete all as specified and directed..Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Materials and Labour for non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, including dismantling of floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Materials and Labour for non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, including dismantling of floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for coloured vitrified ceramic tiles (joint free) 10 mm thick (Square/Rectangular) area of each tile exceeding 0.36 sqm in floor area, etc set over and including 15 mm thick cement mortar (1:4) screed, set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Material and labour for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry @0.3kg/Sqm over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete as per manufacturer instructions and direction. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 20 mm thk black granite slab Machine cut jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) including polishing,making holes and bull nozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match,complete all as specified and directed.

Rounding of / moulding to edge (half round) of granite stone of any description including rubbing and polishing, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick, laid over & including 20 mm thick (average thickness) cement mortar (1:6) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete all as specified and directed.

M&L for machine cut Kota stone slab 20-25 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 etc complete all as specified and directed.

M&L for brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6 ) etc all complete all as specified and directed.

M&L for fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick plaster in cement mortar(1:4) on fair faces of concrete or brick work in two layers (10mm thick 1st layer + 5mm thick finishing layer) mixed with water proofing compound as per manufacturer’s instructions on top layer finish even & smooth without using extra cement, complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6),complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), including finishing even and smooth without using extra cement.complete all as specified and directed.complete all as specified and directed.

Supply only integral water proofing compound.

M&L for preparation of new plastered or un -plastered from walls, and applying two coats of oil bound distemper on walls, over and including a coat of white wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white washing on ceiling, complete all as specified and directed.

M&L for preparation of two coats of white washing on old ceiling/chajja surfaces including preparation of ceiling surfaces complete all as specified and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed.

M&L preparation of old decorated distempered surfaces of walls by washing, rubbing down & stopping holes of distempered surfaces and apply one coat of oil emulsion distemper to walls complete all as specified and directed.

M & L for applying wall care putty on wall surfaces @ 0.02 Kg/Sqm complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Refixing of shutters of any description exceeding 1 sqm but not exc 2 sqm each in same opening after securing or easing & adjusting, complete all as specified and directed.

Supply and Fix, factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm single side prelam PVC sheet with edges painted to match with prelam sheet, reinforced with MS square tube, fixed in opening, complete all as specified and directed.

S & F Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part -I Section 8, clause 8.20 ,and shop coat of pink primer complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and Fix,steel ventilator with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. complete all as specified and directed.

Supply and fixing as in repair 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fixing as in repair Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime or inserting hold fast and making good dismantled portion in cm 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick complete all as specified and directed.

Supply and fixing mild steel flat iron of size 30 X 5 mm work as in hold fast and similar small articles including required cutting , bending and fixing complete, mild steel conforming (Fe-410-0 or Fe-310-0) complete all as specified and directed.

Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 300 mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F stainless steel butt hinges, medium weight, and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeeping clean and washing down with water to remove dust, forign items complete all as specified and directed.

Material and Labour for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M & L for pcc 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, including demolition of cement concrete (un-reinfoced) roof surfaces complete all as specified and directed

Material & Labour for preparation ne surfaces of roof and applying two cpats of Ployurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @ one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. Notes:- (i) As per description of theis item minimum two coats of Ployurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethene(PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in building/Structure of any height.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts, including dismantling of asbestos cement (corrugated, semi corrugated etc) of any thickness, including ridges, hips, valleys as in roof coverings complete all as specified and directed.

All as per item No 97.00 here-in above but except sheeting, including dismantling of asbestos cement (corrugated, semi corrugated etc) of any thickness ,including ridges, hips, valleys as in roof coverings complete all as specified and directed

M&L for asbestos cement two piece serrated ridge for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked bolts,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws including dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings, complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings, complete all as specified and directed.

S&F galvanized corrugated mild steel sheeting 0.63 mm thick with two corrugation side lap fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roofs, walls including dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings, complete all as specified and directed.

All as per item No 102.00 here-in above but except sheeting( any thickness), including dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings, complete all as specified and directed.

S&F plain galvanized 0.80mm thick mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings, length and girth as fixed of class VIII,including dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings, complete all as specified and directed.

All as per item No 104.00 here-in-before but except sheetingincluding dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings, complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F wind ties for roof including securing bolts,flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including painted with one soap coat of zinc chromate primer paint (including preparation of surface at contractor's workshop before fabrication) complete all as specified and directed.

All as per item No 107.00 here-in-before but fixing only complete all as specified and directed.

S & F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed.

S & F for anodised aluminium snap grid frame work for false ceiling (size of grid 605 x 605 mm) fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fastners 12.5mm dia, 40 mm long complete all as specified and directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified directed.

S&F 8mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified directed.

M&L Preparation of wood & wood based materials , new or old of any description and girth, not otherwise described and treated with one coat of creosote oil.treated with tar or coal tar black paint complete all as specified directed.

M & L for 2nd class hard wood plain fillets, square, rectangular, or triangular in section clean sawn, secured with nails, cross sectional area exc 13 & n.exc 25 sq.cm in section, including dismantling timber fillets, rail, posts, rafters, purlins,etc under 40sqcmin section complete all as specified directed.

All as per item No 115.00 here-in–before but except fillets complete all as specified directed.

M & L clean sawn second class hardwood in scantling for purline & rafter in any position etc including dismantling of timeber scantlings 40sqcm and over complete all as specified.

UNIQUE ENTERPRISE