Repair and Renovation of HOD Room of Urdu Department at New University Campus Jammu

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish outside the University Campus.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at site. Of area 3.0 sqm & below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material at site. Thickness of tiles 10 mm to 25 mm

Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material at site as directed by the Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty 1.0 mm thick (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

----------do------------ For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. Fixed to openings / wooden frames with rawl plugs screws etc. Including applying a coat of steel primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Higher charges of welding set including cost of labour (welder, helper) and welding rods etc. Complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make (Kajaria/Johnson/Asian) in all colours, shades of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Distempering with 1st quality Acyrilic distemper having VOC (Volatile organic compound) content less than 50 gms/ltr. of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Melamine polishing on wood work (one or more coats)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure above plinth level including curing formwork in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Supply of labour for different works. Blacksmith

------------do------------ Carpenter

-----------do--------------- Mazdoor

M/S TIRATH SINGH

Sunny Kumar

RAJ KUMAR SALGOTRA