Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC PO PS JANG DISTRICT TAWANG ARUNACHAL PRADESH 790104 | JANG | TAWANG | ARUNACHAL PRADESH | 790104 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹16.6 L+₹4.8 L (40.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹21.3 L+₹9.5 L (80.2%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹21.5 L+₹9.7 L (82.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹31,540
Closing Date
13 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
PROVN OF ONE STORE SHELTER FOR FURNITURE AND PROVN OF ONE STORE SHELTER FOR WSS, AT NIMU UNDER AGE(I)NIMU
2023_MES_589913_1
80051/02/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Nimu
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
AGE(I) NIMU
₹31,540
21 Jun 2023
17 Apr 2023
15 May 2023
17 Apr 2023
13 May 2023
1 May 2023
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, in hard/dense soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete all as specified and as directed.
M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, sub base and surface finished even and fair with out using extra cement all as specified and as directed.
M&L for mild steel work (angle iron or flat iron) as in hold fasts, wall ties, clamps, ventilator pipe, rain water pipe,band, straps, hooks for hanging fans, manhole covers, MS rungs and similar small articles conforming to Fe-310-O or Fe-410-O all as specified and as directed.
M&L for RCC nominal mix, 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete (Note:-TMT bars will be masured and paid sepretly)
M&L for RCC nominal mix, 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span (Note:-TMT bars will be masured and paid sepretly)
M&L for RCC nominal mix, 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Columns, pillars, piers, posts and struts (Note:-TMT bars will be masured and paid sepretly)
S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
S&F mild steel TMT bars 6 to 8 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 W (Gde-E-250) quality A.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
M&L for Rendering 15mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 and finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.
Rendering 15mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 mixing with WPC @2% by weight of cement or as per manufacturer instruction and finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge. Note:WPC will be measured and paid sepratly.
Supply only water proofing compound.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge .
M&L for 3 coats of white wash on new plastered surfaces of wall including preparation of surfaces all as specified and as directed.
S&F plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd Class Hardwood (KAIL) complete all as specified and directed by Engr-in-Charge.
M&L for 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors.
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane
M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F 75mm long butt hinges, medium weight, cold rolled mild steel
S&F 100mm long aluminium anodised, barrel tower bolts of extruded section
S&F 100mm long extruded aluminium alloy handles, fabricated type 'D', anodised
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in plinth protection including provision of necessary form work finishing the exposed surface even and smooth complete all as specified.
M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in flooring and sub base all as specified and as directed.
M&L for glass deviding strips, 3 mm thick and 28 mm width complete all as specified and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
Formwork to sides of pillars, posts, struts, piers, columns and stanchions
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for 2nd class hardwood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b).
TSEWANG DORJAY
CHHIRPON BUILDERS
M/S LOBZANG NORBOO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .