Construction of Community Toilets at Oru Morh and near CISF Check Post-2 at DAM, CPS-I.

Excavation in earth work and dispo-sal of all excavated earth upto a lead of 20 metres and lift upto 1.50 metres ,disposed earth to be levelled and neatly dressed: Chiselling/Wedging out of rock (where blasting is prohibited:) soft rock

Providing and laying cement conc-rete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominalsize) and curing complete excluding cost of form work in: Foundation and plinth:

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:Foundation and plinth.

Random rubble masonry/ polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of app-roved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand)

Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 stone aggregate 12.5mm nominal size) and curing complete

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 Second Class Brick (1 Cement : 6 Sand)

Extra for brick work in Superstructure above plinth level upto floor two level

Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1 cement : 4 sand)

Extra for half brick masonry in super-structure above plinth level upto floor two level.

Half Brick thick honey comb brick work with common burnt clay building bricks in cement mortar1:4 (1 Cement : 4 Sand) Second Class Bricks

Steel work welded in built up sections, trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling, brackets and similar works.

Providing and laying cement conc-rete work 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and rein-forcement for reinforced concrete work in Lintels, beams girders bress-umers and cantilevers upto floor two level :

Providing form work with steel plates 3.15mm. thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuuter-ing, strutting and propping etc. with wooden battens and ballies, height of propping and centring below suppor-ting floor to ceiling not exceeding 4 Mtrs. and removal of thesame for in situ-reinforced concrete & plain concrete work in:Beams, cantilever, girders and lintels.Sides and soffits of beams,beam haunchings, cantilevers, exceeding 1 Mtr. in depth in all heights from floor.

Providing mild Tor steel reinforce-ment for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing and fixing M.S. pressed butt hings with necessary screws. (Copper oxidised) 125x65x2.12 mm

Providing and fixing oxidized M.S. handles with the necessary screws etc. complete.125mm

Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete.250x10mm.

Excavation in earth work and filling in 15 cm. layers in foundation and plinths including ramming, watering and consolidating upto a lead of 20 metres and lift upto a 1.5 metres. (50% spade+ 50% pick work)

Providing and laying cement conc-rete 1:8:16 (1cement: 8sand: 16 graded stone aggregate 20mm. nominal size) and curing complete on slab and floor excluding the cost of form work. screed laid under flooring.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.15 mm dia nominal bore

Providing and fixing brass bib cock of approved quality :15 mm nominal bore

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of pproved quality conforming to IS:8931 a) 15 mm nominal bore :15 mm nominal bore

Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per IS: 1729

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mm Sand cast iron S&S as per IS - 1729

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :100 mm

15mm Cement plaster in single coat on the rough side of for interior plastering upto floor two level includ-ing floor two level including brick/ concrete/ stone walls for interior plastering upto arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1 Cement: 6 Sand).

Extra over item No.1704600 to 1705200 for finishing with a floating coat of neat cement slurry.

6mm Cement plaster to ceiling In Cement Mortar 1:4(1 Cement: 4Sand)

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)

Distempering (two coats) with oil bound washable distemper of appr-oved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Extra over item Nos 17170000 and 17171000 for distempering with oil bound distemper on ceiling and/or sloping roofs.

Finishing wall with water proofing cement paint ofapproved brand and manufactureand of required shade on undecorated wall surfaces(two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Abhishek Thakur

AMAN CONSTRUCTION COMPANY