SPECIAL REPAIRS TO OR MD ACCN NO. P-157/01 TO 08 (IB LINE) AT OLD ASSEY LINES OF 54 INF DOU UNDER GE(SOUTH) SECUNDERABAD

Amount

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 100mm dia complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) setin cement mortar 75mm dia, complete all as specified and as directed.

Taking down frames (including grills/wire mesh) with shutters n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down frames (including grills/wire mesh) with shutters exc 1.50 Sqm but n.exc 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc., complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6, complete all as specified and as directed.

S & F 15mm bore tubes medium grade galvanised with all fitting and fixed concealed type complete to walls and ceilings or laid in floors 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing (or) removed to store, complete all as specified and as directed.

All as per item No. 8 above but 20mm bore.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and as directed.

M & L second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed.

S & F pressed steel frame for doors with one or more rebeat using 1.25mm thick MS sheet including necessary fixing lugs, hinges the plate etc complete profile 'A' size 125x60 mm, complete all as specified and as directed

S & F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hinges, lcok strike plate etc complete profile size 60x105 mm using 1.25mm thick MS sheet complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each, complete all as specified and as directed.

S&F 35mm 2nd class hard wood plain framed factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and tile as per IS 1003 (Part-I0) Kiln seasoned and chemically pressure treated complete all as specified and directed

S & F for 35mm thick, 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 complete all as specified and as directed.

S & F 25mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

All as per item No. 17 above but 40mm thick.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F steel window with side hung shutters incluidng projecting type hinges with steel handle and peg stays with glazing bars, devotailed or welded complete all as specified and as directed.

S & F steel window with side hung shutters incluidng projecting type hinges with steel handle and peg stays with out glazing bars, devotailed or welded complete all as specified and as directed.

M & L for framed work such as grills, gratings etc with ends of bars, framed guard bars, ladders etc and similar works conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S & F MS hold fasts (FI 25X3, 250mm long) conforming to Fe-290, Gde E-165, complete all as specified and as directed.

M & L for PCC 1:3;6, type C1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts etc including necessary form work complete all as specified and as directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty in square panes not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 3mm thick ordinary plain glass pin head type and glazing with oil putty in square panes not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F in repairs 3mm thick ordinary plain glass pin head type and glazing with oil putty in square panes not exc 0.50 sqm in each pane complete all as specified and as directed.

S & F for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless seel wire staples, etc complete all as specified and directed.

S & F in repairs for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless seel wire staples, etc complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified and directed.

S & F 100mm butt hinges medium weight cold rolled mild steel.all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles fabricated type anodised, all as specified and directed.

S & F 200mm long MS barrel tower bolt stove enamelled black with brigh bolt complete all as specified and as directed.

S & F 150mm size MS pressed handles, oval type, stone enamelled black complete all as specified and as directed.

S & F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M&L Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M & L for rendering 15mm thick on concrete or fairfaces of brick work in CM 1:4, finished even and smooth without using extra cement but mixing WPC complete,all as directed and as specified Note:- WPC shall be measured and paid separately

M&L for sunken portion to be filled with water and tested for 72 hrs (after required period of curing of plastered sunken floor surface) to observe leakage/seepages, leakages/seapage if any shall be arrested by pressure grouting and re-tested till leakage/seepages completely stopped. After pointing test, the surface shall be dried and bottom and sides of the sunken slabs shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 Kg per Sqm and applying a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.5 Kg per Sqm including 450mm long 25mm dia medum grade GI pipe shall be provided at the lowest in case of leakage. The joints in CI/GI/PVc pipes, Nahani traps, WC and P/S trap connection shall be made leak proof. The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers all as specified and directed

M & L for PCC 1:3:6 type B0, (12.5mm size graded stone aggregate) as in levelling course including weathering slightly rounded or chamfered angles and throating as directed complete all as specified and as directed.

Takiang down cement plaster/terrazzo finish on brick/RCC/stone wallsof any description including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

M & L Rendering 15mm thick on concree or fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as directed and as specified.

M & L for applying two coats of distemper oil emulsion on walls over a coat of primer over a coat of wall care putty as required as to smooth finishing of rough surfaces including preparation new wall surfaces complete all as specified and as directed.

M & L for rendering 5mm thick on brick work or concrete surface in CM 1:4 over 10mm thick in CM 1:6 including water proofing compound (WPC) and finished the surface smooth and even without using extra cement Note:- WPC will be measured and paid separately.

M & L for two coats of cement base paint on walls over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed.

Supply only integral water proofing compound of approved brand.

M & L for rendering 5mm thick cement mortar 1:4, on ceiling surfaces, finished even and smooth without using extra cement complete all as directed and as specified.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M & L for applying one coat of white wash on ceiling including preparation of old decorated surfaces complee all as specified and as directed.

Demolition precast concrete articles and pre cast concrete block walling complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coat of cement base paint over a coat of primer on walls, complete all asspecified and directed

M & L for precast cement concrete 1:2;4 type B1 (using 20mm graded stone aggregate), as in landings, cover slabs (for man holes etc) shelves and similar articles with plain faces set in CM 1:4, complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including laying over 15mm thick screed bed in CM 1:6 complete all as specified and directed

M & L Coloured ceramic tiles 7-8mm thick area of each tile exc 0.11 Sqm n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with over screed bed of 15mm thick in CM 1:6 coomplete all as specified and directed.

M & L Granite 20mm thick (of any type) work table robed & polished in steps, jambs, pillar, widow cills, cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1;2 using marble dust with admixture of pigment to match the shade of granite, and half mouldd at one side complete all as specified directed

M & L glazed ceramic coloured tiles in vertical surface 300x200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in CM 1:3 on wall, complete all as specified and directed

S& F in repairs water closet (squatting pan) complete including provision of lime concrete bedding 'Orissa' pattern size 508 x 440mm white, integral foot rests including flushing cistern 10 ltrs and flush pipe, PVC connection of size 450mm complete all as specified and directed

S & F 75mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2;4, type B1, complete all as specified and as directed.

Mild Steel bars(TMT Bars) 6 to 8 mm dia and over, cut to length bent to shape as required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

S & F 110mm aid PVC (SWR) WC connector with lip ring complete all as specified and as directed.

S & F 110mm aid PVC (SWR) WC connector bend type complete all as specified and as directed.

S & F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F 75mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coat of distemper oil emulsion on walls over a coat of primer over a coat of birla wall care putty as required as for finishing of rough surfaces complete all as directed and as specified.

M & L for one coats of synthetic enamel paint on wooden surfaces including preparation of old panted surface of any description over 10cm width and girth complete all as specified and as directed.

M&L for one coats of synthetic enamel paint on steel surfaces including preparation of old painted surface of any description over 10cm width or girth complete all as specified and as directed.

S & F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type) complete all as specified and as directed.

S & F in repairs, 15mm bore, stop valves, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed..

S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F in repair Brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends for brackets, fitting with pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32mm includkng waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Demolition of existing tank RCC/PVC of any description and S & F 500 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C1, (20mm size graded stone aggregate) as in plinth protection laid in panels including finished the surfaces smooth and even without using extra cement all as directed and as specified.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantillever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F stainless steel kitchen plate rack of 28 gauge of size 34"X35"X9" complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed.

M& L for PCC 1:2;4 type B1 using 20mm graded aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:3 mixed with itegral water proofing compound as per manufacturer's instructions as in roof and chajjas, finished thesurface fair and even without using extra cement complete all as specified and as directed. Note:- Supply of water proofing compound will be measured and paid separately.

M & L for preparing plastered surfaces of roof and applying primer @ 0.3 Ltr/Sqm and applying uniform coat of blown bitumen grade 85/25 @ 1.20 Kg/Sqm conforming to IS-702 over laying APP modified prefabricated membrane mineral finish 3.0mm thick and wieght not less than 3.5 Kg/Sqm reinforced with non over polyesser matt black finish with torch application with 100mm over lap, and over lap will be properly sealed with torch and blown bitumen as per manufacturers instruction applying aluminium paint on top of membrane @ 0.2 Kg/Sqm, complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface complete all as specified and as directed.

M & L for chequered cement concrete tiles size 25 cm x 25 cm x 20-25mm thick set, jointed and pointed in neat cement slurry in flooring including 15mm thick screed bed as in CM 1:6 complete all as specified and directed .

M & L cement conrete 75mm thick type D-2, 1:4:8 (using 40mm size graded stone aggregate) as in sub base complete all as specified and directed.

M & L 100mm thick PCC 1:2:4 type B2 (40mm graded aggregate) concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

S & F 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choke laminated and other side balancing white lamination fixed with screwed and beading complete all as specified and directed.

M & L plain fillets square, rectangular in section sawn secured with nails or brads 2nd class soft wood sectional area n.xc 3 sq cm each complete all as specified and directed..

S & F continuous (Piano) hinges MS bright finish or elecro galvanised 40mm width of flape complete all as specified and directed..

S & F 35 to 40mm dia cup board knobs fixed with nut, screws and washers of brass polished complete all as specified and directed.

S & F brass locks, drawer grade-I size 50mm complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and directed.

M & L for Point wiring concealed conduit in wall with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for the following

(a) One light point controlled by one, one way switch 5 A, SP

(b) One ceiling fan/wall fan/exhaust fan point controlled by one, one way switch and regulator

(c) One bell point control by one way switch 5 amps.

(d) one 2/3 pin 5 Amps switch socket oultet point controlled by one switch on the same board

(f) one 3 pin 5 Amps switch socket indepented board

(g) One light point controlled by two way switch 5 A, SP

Description all as per item No 101 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point inclduding running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts, all as specified and directed.

S & F Switch socket cobination flush type multipurpose 2/3 pin amps 230 volts complete all as specified and directed

S & F socket outlet flush type multipupose 2/3 pin 5 amps 230 volts complete all as specified and directed

Supply and fix switch socket combination flush type multipurpose 5 in 1 5/16 amps 230 volts complete all as specified and directed

S & F bell ding dong type AC 230 Volts, complete all as specified and directed

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed

S&F sheet metal enclosure vertical type MCB DB TPN 4 way double door with 200 Amps rated bus bar 415 volts suitable for and including 100 Amps TPN MCCB 25 KA as incommer and 12 Outgoing SP MCB's with flush type locking system complete all as specified. Note: MCB SP Shall be measured and paid seperately

S & F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed

S &F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's complete all as specified and directed

S &F MCB SP 32 to 40 Amps 240 volts for fixing on MCB DB's complete all as specified and directed

S &F MCB SP40/63Amps 240 volts for fixing on MCB DB's complete all as specified and directed

S&F 18/20 w Wall mounted box type LED tube light fittings alongwith intergrated dirver complete of Havells endura linear neao Cat part No BS20 WLED865SPCWH OR Equivalent make BAJAJ/PHILIPS/CG/WIPRO

S &F angle/batten holder including led lamp of 9 watt of insulated body with back plate for angle batten fittings fixed with wooden round blocks complete all as specified and directed

M & L for Submain wiring with two single core 6.0 Sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 6.0 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead 4mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to DBs/main switch incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4mm size and protection pipe of 15mm bore GI light grade.

M&L steel body exhaust fan AC single phase 230/240v of size 300mmsweep with louvere complete including wall hole and bringing back old unserviceable exhust fan to store etc all as specified and bringing back old un servicebale exhaust fan to store etc all as specified and directed

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and directed Note :- 1. PVC 2 Core copper cable multstandrad of size 1.50 Sqmm from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor 2. Necessary repairs/replacement of unserviceable parts shall be measured and paid seperately.

M & L Rewinding of burnt ceiling fan of 1200 / 1400mm sweep motor with supper enameled copper wire of suitable size as per details given below of any make, type, model incl transportation (inclusive of material & labour) complete all as specified and directed

Supply and fix Sealed ball bearing suitable for ceiling fan of any size complete all as specified and directed

Supply and fix Rubber bushes with MS clamp,bolt,nut and split pins complete all as specified and directed

Supply and fix Fan condensor 2.5 /4 mfd complete all as specified and directed

Supply & replace downrod of 4 ft height complete all as specified and directed

S &F single pole and nuetral sheet metal enclousr with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed

Supply & fixing all metal vertical mounted storage water heater 4 star rated powder coated body with vacuum and pressure reaase valve and snap action termostat thermal cutout non retun devices of capacity 25 ltrs 2.0 KW 240 volts with plug top PVC connections for hot/cold water an brining back old unserviceable geyser complete all as specified and directed

Supply and laying steel water tubing, medium grade, galvanised of size 15 mm bore, ISI marked including all ISI marked fittings such as tees, bends elbow reducer, unions etc laid in trenches complete including cutting the existing pipe of any size complete all as specified and directed

Supply and fix gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for iron pipe or for union and fixed completely as specified suitable for pipe size 15 mm bore complete all as specified and directed.

S & F PVC connecting pipe 45 cm long with two Nos brass chesk nuts and rubber washers suitable for 15 mm dia GI pipe for hot water connection for geysers complete all as specified and directed

S & F Bib taps chrominium plated with crutch or butterfly handle 15 mm dia ,screwed for iron pipe or for brass ferrula and fixed complete all as specified and directed

S &F 2 Way Swith complete all as specified and directed

S &F ceiling fan regulator step type AC240 Volt suitable for 1200/1400mm each complete all as specified and directed

S &F bell push button single pole 230v complete all as specified and directed

MAHALAKSHMI INFRA PROJECTS

SAI RUPA CONSTRUCTIONS

STANDARD AGENCIES

RAMALA ENTERPRISES