Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹86.1 LAccepted-AOC | ₹86.1 L Quoted ₹85.1 L | 1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical Found technically unqualified |
| 3 | Rejected-Technical | - | - | Rejected-Technical Found technically unqualified |
| 4 | Rejected-Technical | - | - | Rejected-Technical Found technically unqualified |
| Sl No | Description | Qty | Unit | Saurabh Enterprises L1 |
|---|---|---|---|---|
| 1.00Part I- CIVIL AND PLUMBING WORKS | ||||
| 1.01 | Brick work with F.P.S.bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.6 | cum | 6,000 ₹15,600 Lowest |
| 1.02Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | ||||
| 1.03 | Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.6 | cum | 6,200 ₹16,120 Lowest |
| 1.04 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | 32 | Sqm | 1,050 ₹33,600 Lowest |
| 1.05 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). | 32 | Sqm. | 100 ₹3,200 Lowest |
| 1.06 | Providing edge prefinished or moulding to 18mm thick marble stone counters, Vanities, Treads etc., including machine polishing to edge to give stone nature finish etc. complete as per design approved by Engineer-in-Charge.(Granite work) | 22 | Rmtr. | 450 ₹9,900 Lowest |
| 1.07 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade
complete. | 36 | Sqm. | 1,100 ₹39,600 Lowest |
| 1.08 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.5mm all complete. With 12mm uPVC or aluminum powder coated U beading | 38 | Sqm. | 900 ₹34,200 Lowest |
| 1.09Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage o water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification and direction of engineer-in-charge Section of steel reinforcement and cross sections of uPVC profiles to be set as per design approved by Engineer -in charge. Wire mesh/ Glazing of plain /toughened/ laminated/ double glass unit with/ without high perfrmance coatings as per design requirements and conforming to IS:3548 and IS :16231 shall be paid seperately. Note :- Structural design proof checked from a government institute to be provided by the manufacturer for (i) sites with basic wind speed >45 m/ sec as per IS 875-Part 3 (ii) sites with structure height more than 20 m for all wind speeds | ||||
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
16 Jun 2026, 1:00 pmClosed
Principal ARSD College
Principal, Atma Ram Sanatan Dharma College, University of Delhi
online tender for SITC of CRCA steel Lab counters and repair and renovation woks of Chemistry lab 01 02 at ARSD College University of Delhi
2026_DU_910327_1
CE/DU/2026-27
Open Tender
Civil Works
Works
30 days
ARSD College
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Principal, ARSD College
₹1.9 L
3 Jul 2026
26 May 2026
17 Jun 2026
26 May 2026
16 Jun 2026
26 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Part I- CIVIL AND PLUMBING WORKS | |||||
| 1.01 | Brick work with F.P.S.bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.6 | cum | - | - |
| 1.02 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | - | - | - | - |
| 1.03 | Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.6 | cum | - | - |
| 1.04 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | 32 | Sqm | - | - |
| 1.05 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). | 32 | Sqm. | - | - |
| 1.06 | Providing edge prefinished or moulding to 18mm thick marble stone counters, Vanities, Treads etc., including machine polishing to edge to give stone nature finish etc. complete as per design approved by Engineer-in-Charge.(Granite work) | 22 | Rmtr. | - | - |
| 1.07 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade
complete. | 36 | Sqm. | - | - |
| 1.08 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.5mm all complete. With 12mm uPVC or aluminum powder coated U beading | 38 | Sqm. | - | - |
| 1.09 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage o water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification and direction of engineer-in-charge Section of steel reinforcement and cross sections of uPVC profiles to be set as per design approved by Engineer -in charge. Wire mesh/ Glazing of plain /toughened/ laminated/ double glass unit with/ without high perfrmance coatings as per design requirements and conforming to IS:3548 and IS :16231 shall be paid seperately. Note :- Structural design proof checked from a government institute to be provided by the manufacturer for (i) sites with basic wind speed >45 m/ sec as per IS 875-Part 3 (ii) sites with structure height more than 20 m for all wind speeds | - | - | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.37 MB
BOQ_956746.xls
BOQ • 0.40 MB
Corrigendum2.pdf
PDF • 0.08 MB
Revised-tender.pdf
PDF • 1.72 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .