Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹28.0 L+₹86,332.80 (3.18%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹28.8 L+₹1.7 L (6.24%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹29.5 L+₹2.4 L (8.92%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹36.8 L+₹9.7 L (35.6%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Bikaner
GE North Bikaner Rajasthan 334001
PERIODICAL SERVICES OF MD ACCN FOR ZONE C UNDER AGE BR II UNDER GE NORTH BIKANER MIL STN BIKANER
2022_MES_540944_1
GE (N) BKN TOKEN NO 39 /2022-2023
Open Tender
Civil Works
Item Rate
335 days
GE (N) BIKANER
Class D category a i
8 documents required · 8 mandatory
₹500
GE North Bikaner
₹80,000
Yes
30 Sept 2022
26 Jul 2022
29 Aug 2022
26 Jul 2022
22 Aug 2022
10 Aug 2022
Amount
M&L for preparation to old decorated, plastered or unplastered surfaces of wall, by brooming down, scraping down smoke spots, moulds, mossand efflorescent salts etc. and applying one coat of white (lime) wash including cornices pilasters etc complete all as specified and as directed by Engineer-in-charge.
-Ditto- all as per item No 1 above but on ceiling.
M&L for preparation to old decorated, plastered or unplastered surfaces of wall, by brooming down washing rubbing down, scraping down smoke spots and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion white or tinted including cornices pilasters etc complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatment of wall including cornices, pilasters etc by scraping down and applying white wall care putty for filling the undulation, as required and finished with two coats distemper oil emulsion, white or tinted complete all as specified and as directed by Engineer-in-Charge
M&L preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-charge.
M&L for preparation to old decorated, plastered or unplastered surfaces of wall, by brooming down etc. and applying one coat of cement based paint white or tinted including cornices pilasters etc complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatment of wall including cornices, pilasters etc by scraping down and applying two coats of cement based paint, white or tinted complete all as specified and as directed by Engineer-in-Charge
M & L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander and applying two coat of exterior emulsion/weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and as directed by GE.
M&L for preparation to old painted surfaces of wood or wood based material over 10cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
M&L for preparation to old painted surface of steel over 10cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames of any thickness including punching or drilling out old glazing pins/springs clips all as directed by Engineer-in -charge.
S&F sheet glass 3mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane all as directed by Engineer-in -charge.
Ditto all as per item no 12 above but figured glass pin headed type complete all as specified and as directed by Engineer-in-charge.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading or aluminium beadings complete all as specified and as directed by Engineer-in-charge.
Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement complete all as specified and as directed by Engineer-in-charge. Note :- Integral water proofing liquid will be measured and paid seperately.
Supply only water proofing compound complete all as specified and as directed by Engineer-in-charge.
M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed by Engineer-in-charge.
M&L rendering 15 mm thick in CM 1:6 on concrete solid block wall surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L for preparation to new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.
M&L for preparation on newly plastered surface of wall for painting and applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper all as specified and directed by Engr-in-Charge.
M&L preparation to new plastered surface of wall and applying two coat of cement base paint over a coat of primer of approved tint, colour including cornices, pilasters complete all as specified and as directed by Engineer-in-charge.
M & L for preparation of new surfaces of walls/ceiling incl pillar etc. and applying two coat of exterior emulsion/weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and as directed by GE.
M&L for writing letters/Bldg Nos or figures (Block. Roman, Italic or Indian) n exc. 30 cm height using synthetic enamel paint white or circular/black painted, black back ground all as specified and directed by Engineer in Charge.
M&L for removing up roots of vegetation growth on building roof top/ sides of walls of any height n exc 30 CM girth and applying suitable acid for burning of the roots in the RCC/ brick wall surfaces including stacking of serviceable materials and disposal of unserviceable materials to a distance n exc 50 m and cleaning of site and making good of the disturbed surfaces in brick work in CM 1:4 and rendering 10 mm thick plaster in CM 1:4 or pointing in the same mortar surface area nexc 1 Sqm in each place complete all as specified and as directed by Engineer-in-charge.
M&L for preparation surfaces of wall/ceiling and applying 3mm thick wall care putty on old or new plastered complete all as specified and as directed by Engineer-in-charge.
M&L for providing and injecting chemical emulsion for Post constructional Antitermite Treatment by providing and injecting Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and as directed by Engineer-in-charge.
M & L Providing and injecting chemical emulsion for Post constructional Antitermite Treatment along the external wall below concrete or masonry apron using Antitermite Treatment chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by Engineer-in-charge.
vikas builders
SUBHAM ENTERPRISES
m/s gaurav enterprises
M/S BIKANER CHEMICAL LABORATORIES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .