Shifting the office of Municipal Council Una in the upper floor of Parking cum Shopping complex situated at Arvind Marg Una (HP).

Amount

Brick work using common burnt clay building bricks in foundation and plinth in : Cement mortar 1: 6 (1 cement: 6 sand) Ist class bricks.

Half brick masonary in common burnt clay building bricks in : Cement mortar 1 : 4 (1 cement : 4 sand ) Ist class bricks

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. First class sal wood.

Providing and fixing flush door shutters decorative type, core of block board construction with frames of first class hard wood and well matched first class Indian teak wood ply veneering with vertical grains or cross bands and face veneering on both faces of the shutter : 30 mm thick including black enameled M.S. butt hinges.

Providing and fixing paneled glazed or paneled and glazed shutters for doors, windows, and clerestory windows including black enameled iron butt hinges with necessary screws. 35mm thick Ist class kail wood or equivalent

Providing and fixing wire gauze shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia. 0.56mm for doors, windows, clerestory windows including bright finished black enameled iron hinges with necessary screws. 30 mm thick Ist class kail wood.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree; straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/paneling C.P. brass/stainless steel screws. All omplete as per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including thecost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately)

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete Frame work for base to be measured & paid for separately) 12mm thick.

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth : In cement mortar 1:5 (1 cement : 5 sand)

20mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth : In cement mortar 1:5 (1 cement : 5 sand)

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter: Ready mixed brushing with white lead for priming.

Painting two coats ( excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping : Ready mixed paint other than white.

shiv kumar kapila

MAHESH ANGRA

Tilak Raj

VINOD KAPOOR