P/L Replacement 0 to 1.9 km

LAYG OF CS PIPELINE — LAYING OF CARBON STEEL PIPELINE: LAYING OF 14 INCH OUTER DIAMETER CARBON STEEL PIPELINE AND LR BEND (API 5L GRADE X46 TO X65, ERW 6.4 TO 9.5 MM WT, EXTERNALLY COATED WITH 3 LPE/3 LPP/HEAT SHRINK SLEEVE) IN UNDERGROUND CONDITION WITH 1.25 M CLEAR COVER.

LAYG OF CS PIPELINE — LAYING OF CARBON STEEL PIPELINE: LAYING OF 14 INCH OUTER DIAMETER CARBON STEEL PIPELINE AND LR BEND (API 5L GRADE X46 TO X65, ERW 6.4 TO 9.5 MM WT, EXTERNALLY COATED WITH 3 LPE/3 LPP/HEAT SHRINK SLEEVE) FOR CLEAR COVER OVER 1.25 M AND UPTO 2.0 M.

LAYG OF CS PIPELINE — LAYING OF CARBON STEEL PIPELINE: LAYING OF 14 INCH OUTER DIAMETER CARBON STEEL PIPELINE AND LR BEND (API 5L GRADE X46 TO X65, ERW 6.4 TO 9.5 MM WT, EXTERNALLY COATED WITH 3 LPE/3 LPP/HEAT SHRINK SLEEVE) FOR CLEAR COVER OVER 2.0 M.

LAYG OF CS PIPELINE A/G — LAYING OF CARBON STEEL PIPELINE A/G: LAYING OF 14 INCH DIAMETER CARBON STEEL PIPELINE, LR BEND (API 5L GRADE X46 TO X56, ERW 6.4 TO 9.5 MM WT, EXTERNALLY COATED WITH 3 LPE/3 LPP/HEAT SHRINK SLEEVE) IN ABOVE GROUND CONDITION AT ALL HEIGHT AND LOCATION.

SPLY AND INSTLN OF — PIPELINE DIRECTION MARKER: PROVIDING AND INSTALLATION OF PIPELINE DIRECTION MARKER AS PER STANDARD AND SPECIFICATION.

SPLY & INSTLN OF WARNING — PIPELINE WARNING BOARD: PROVIDING AND INSTALLATION OF PIPELINE WARNING POST AS PER STANDARD AND SPECIFICATION.

SPLY AND INSTLN OF — TEMPORARY BARRICADING FOR SAFETY: PROVIDING AND INSTALLING METALLIC TEMPORARY BARRICADING WITH ZEBRA PAINTING AND FLASHING LIGHTS ALONG WITH SAFETY SIGNAGE DURING PIPELINE LAYING WORK.

HOOK UP OF PIPELINE — HOOK UP WORKS OF OLD AND NEW 14 INCH DIAMETER PIPELINE IN UNDERGROUND CONDITION.

TRANSPT OF CS LINE PIPE — TRANSPORTATION OF LINE PIPE: TRANSPORTATION OF 14 INCH OUTER DIAMETER CARBON STEEL LINE PIPE OF LENGTH UPTO 5.5 M FROM OWNER STOCK YARD AT VASHI NAVI MUMBAI AND TALEGAON PUNE TO CONTRACTOR FABRICATION WORKSHOP FOR FABRICATION OF HOT PULLED LR BEND. IN TRUCK OF MT CAPACITY.

FAB OF 6D LR BEND — FABRICATION AND TEST OF 6D LR BEND: FABRICATION, TESTING AND THIRD PARTY INSPECTION FOR HOT PULLED 6D TEST BEND OF DEFLECTION ANGLE 90 DEG AS PER SPECIFICATION MADE OUT OF OWNER FREE ISSUE LINE PIPE OF 14 INCH OUTER DIAMETER BARE/3 LPE COATED AND 7.1 TO 9.5 MM WALL THICKNESS CONFORMING TO API 5L GRADE X56/65 ERW FOR QUALIFICATION OF BENDING PROCESS.