S/R to Sub-Centre Building at Chhachhi Tehsil Nalagarh Distt Solan (HP)

Amount

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. works including all lead and lift as per the direction of the Engineer-in-charge,

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead.Not exceeding 3 sq.m in area including all lead and lift as per the direction of the Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Floors etc.upto 200mm. in thickness. including all lead and lift as per the direction of the Engineer-in-charge.

Edges of slabs and breaks in floors and walls: Under 20 cm. wide. including all lead and lift as per the direction of the Engineer-in-charge.

Providing and laying cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-Lintels, beams girders bressumers and cantilevers upto floor two level :including all lead and lift as per the direction of the Engineer-in-charge

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level :Tor Steel

Providing woodwork in frames of doors,windows, clerestory, windows and other frames wrought,framed and fixed in position.Sal wood.including all lead and lift as per the direction of the Engineer-in-charge.

Providing and fixing panelled glazed or panelled and glazedshutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.2nd class deodar wood. 40mm thick including all lead and lift as per the direction of the Engineer-in-charge.

6 mm Cement plaster to ceiling(a) In Cement mortar 1:3(1 Cement:3 Sand), including all lead and lift as per the direction of the Engineer-in-charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:-Cement Mortar 1:4(1 Cement : 4 Sand)including all lead and lift as per the direction of the Engineer-in-charge

Pointing on square rubble,coursed or un-coursed stone masonry with cement mortar 1:3(1 cement:3 Sand)a) Flush pointing including all lead and lift as per the direction of the Engineer-in-charge.

Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of following shades:-SILVER GREY. including all lead and lift as per the direction of the Engineer-in-charge

Precast terrazzo tiles hydraulic compressed 20 mm thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm in height on 10 mm thick cement plaster 1:3 (1 cement: 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of following shades.:-SILVER GREY. including all lead and lift as per the direction of the Engineer-in-charge

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry. including all lead and lift as per the direction of the Engineer-in-charge

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.Plain grill. including all lead and lift as per the direction of the Engineer-in-charge

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm thick 2nd class deodar wood including all lead and lift as per the direction of the Engineer-in-charge

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.250x16mmincluding all lead and lift as per the direction of the Engineer-in-charge

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete 300x10mm including all lead and lift as per the direction of the Engineer-in-charge

100x10mm, including all lead and lift as per the direction of the Engineer-in-charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.125 mm including all lead and lift as per the direction of the Engineer-in-charge

100 mm, including all lead and lift as per the direction of the Engineer-in-charge.

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. including all lead and lift as per the direction of the Engineer-in-charge

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including all lead and lift as per the direction of the Engineer-in-charge

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing with white lead for priming including all lead and lift as per the direction of the Engineer-in-charge

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other nforeign matter :-- With white readymixed paint including all lead and lift as per the direction of the Engineer-in-charge

Making plinth protection with flag stone flooring 40 mm thick over a bed of 15cm with rammed earth and cement pointing 1 : 3 (1 Cement : 3 Sand) in proper shape as per instructions of the Engineer Incharge

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground.including all lead and lift as per the direction of the Engineer-in-charge

HEM RAJ THAKUR

raj kumar